Shipping
Policy
Request
Info / Quote
| Somfy Sonesse ST50 120VAC Standard - Wired - Roller Shade Motor
|
|
 
Larger Somfy Sonesse 50 (ST50) Star Head Standard Roller Shade Motor Image
The NEW Somfy Sonesse 50 ST50 Shade Motor is an ultra-quiet 120VAC motor designed for specific use with roller shades. The Sonesse ST50 motors are engineered with superior noise reduction technology and from a distance of 3 feet, are barely heard. The heavy duty Sonesse 50 motor is designed for tubes as small as 2” in
diameter and does not have any practical limits with respect to it use with roller shades.
The Standard Version of the Somfy ST50 Motor is controlled via wired wall switch and can be optionally control via RTS, IR or RS232 with add -on modules. This is a simple, easy to use and easy to install solution for your shade motorization needs. The upper and lower limits are programmed for the shade stopping position by the use of two simple push buttons on the motor head. The shade can be commanded to move to the set limits with the use of a maintained command.
Somfy Sonesse 50 ST50 Standard 120VAC Roller Shade Motor Specifications
• Operating Voltage: 120VAC
• Normal Current Draw: 0.95A
• Torque: 4Nm
• Lift Capacity
- 2" Tube: 35.2lb
- 2.5" Tube: 28lb
• Motor Speed: 32 RPM
• Ultra-Quiet Operation : 44dBa
• Rubber Drive Provides Quite Operation
• Heavy Duty Applications
• Standard Wired Control
• Star Head Design Locks into Brackets
• Removable Control Cord - Supplied w/ Open Ends
• Compatible with 2" and Larger Shade Tubes - Adapters may be required
• Requirements for use
- 120VAC Power
- Wired Control Switch
- 2" or Larger Roller Shade Tube
- Somfy Motor and Idler Brackets
- Crown and Drive Adapter to Match Tube
• Warranty 5 years
• Includes: Motor, Drive Stop and Power Cord
• Dimensions
- Overall: 28.5” L x 2.25” Dia
- Insertion Dia: 1.82"
- Tube Insertion Length: 27.625” App.
• Weight: App. 5.62lb
• Somfy Part # 1030061
• Minimum Shade Width
- App. 30.25" Tube Length with 2" Idler # 9013592
- App. 32.25" Tip to Tip Including Brackets with 2" Idler # 9013592
- App. 33.25" Tube Length with Universal Idler # 9420800
- App. 35.25" Tip to Tip Including Brackets with Universal Idler # 9420800
View the Sonesse 50 ST50 Roller Shade Motor Installation Datasheet
Shade Installation Instructions - PDF
Main Roller Shade Components Index - LOTS of Shade Component Options
ST50-STD
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Standard Motor to IR, RTS Multi-Link Conversion - 1822183
|
|
The Somfy Multi-Link 1822183 head rail control is used to convert standard wired shade motors to RTS RF, IR or RS232 Control. This module can be used with virtually any manufacturers 120VAC wired motors to enable compatibility with Somfy's wide range of shade motor control solutions.
Somfy 1822183 Multi-Link Head Rail Control
• Operating Voltage: 120VAC w/ 2.5A Load Max
• Converts Standard Wired Motors to:
- RTS RF Control
- IR Remote Control - Requires Optional IR Remote and IR Sensor
- Low Voltage Control - Requires Optional Low Voltage Switch
- RS232 Control - Requires Optional RS232 Module
• Compatible Conversion Components
- Somfy RTS RF Control - All
- IR Remote Control - # 1810498
- IR Sensor - # 9012872
• Dimensions: 3.175” L x 2.16"W x 1.36" Depth
• Includes Adhesive Back Mounting Pads
• Somfy Part # 1822183 and 6301991
View the Back of the 1822183 Multi-Link Control
View the 1822183 Multi-Link Conversion Instructions
1822183
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy IR Sensor 9012872 for Multi-Link 1822183 Interface
|
|
The Somfy Universal IR Sensor is designed for use with the Somfy 1822183 Multilink Standard motor Conversion Interface. The 9012872 Sensor will NOT work to for direct control of the LT30 IR motors or the 1810872 Interface. This sensor enables the reception of IR Control of standard wired motors when used with the 1822183 lti-Channel Interface.
Somfy IR Sensor 9012872 Specifications:
· For use with Somfy 1822183 Multilink Interface
· RJ11 Connector
· Supplied with 32" of Lead Length
· Mounts with supplied Adhesive backed Velcro
9012872
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Multichannel IR Remote 1810498
|
|
The Somfy 1810498 MultiChannel IR Remote Control is designed for use with the Somfy 1810872 16 Channel RTS Interface and Multink Interface Controls 1822183 and 1822184. The multichannel remote allows for IR selection of diferent channels of RTS Control. The Somfy 9015078 Sensor is required for use with the 16 Channel interface. This remote will NOT directly control the LT30 IR motors.
Somfy IR Sensor 1810498 Specifications:
· Provides Up To 99 Channels of IR Control
· Dimensions: 7" L x 2" W x 5/8" Thick
1810498
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Sonesse 50 and LT50 2" Drive - 9206088
|
|
The Somfy 9206088 is a 2" Hard Clip Drive for use with Somfy or Rollease 2" Smooth Wall Tubes and Somfy Sonesse 50 ST50 or LT50 Motors. The use of this drive requires the use of a drive stop. Since the tubes are smooth wall the user is required to drill a hole through the tube and into the drive. A rivet or screws may be used and 4 rivets or screws are rerquired. We prefer to countersink holes in the tube and use screws but some do use rivets and then grind the head of the rivet smooth to the tube.
Somfy 9206088 2" Drive
• Compatible with Somfy Sonesse 50 / LT 50 Motors
• Compatible with 2" Somfy or Rollease Smooth Wall Tubes
• 1 Drive required for Motor
• 1 Drive required for Idler
Somfy ST50 Motor with 2" Drive Installed
Somfy Idler with 2" Drive Installed
9206088
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy 9420800 Universal Idler w/10mm Collapsible Shaft
|
|
The Somfy 9420800 Universal Idler End Cap is used opposite the motor and can be used for a variety of tube sizes. The 9420800 Idler features a spring loaded 10mm shaft that allows for easier installation of the shade assembly within the mounted brackets. This idler can NOT be used by it self it must be used in conjunction with the appropriate drive for the specified tube size being used. We stock this idler for use with the Somfy or Rollease 2" smooth wall tubes which requires the use of the Somfy 9206088 2" Hard clip Drive and we also stock this idler for use with the Rollease 2.5" tube which requires the Rollease RTA6U50 crown and drive kit. As is the case with most heavy duty components the use of this idler with smooth wall tubes does require the end of the tube to be notched and the assembly must be either riveted or screwed in place. The nice thing with the 2.5" rollease tubes is that no modification is necessary to the tube since their tube design features an aggressive internal rib pattern. The Universal idler does come with a retaining clip to hold the drive on the idler assembly.
Somfy 9420800 Universal Collapsible Idler
• Universal Design for use with a wide range of tubes
• Heavy Duty Constructions of Delrin and Steel
• Spring Loaded 10mm End Pin
• Includes Retaining clip
• Requires Compatible Drive Wheel - Not Included
- 9206088 - Somfy 2" Hard Clip Drive for 2" Somfy/Rollease Smooth Wall Tube
- RTA6U50 - Rollease 2.5 Crown Drive Adapter Kit for 2.5 Somfy Tube
• 10mm Shaft Extension - 1.6"
• 10mm Shaft Compresses - 1.2" (Minimum extension 0.40")
• Overall Insertion Depth without Attached Drive: 3.7"
• Overall Length: 5.4"
Somfy 9420800 Idler Instructions - Sorry we could not get them in English
Somfy Idler with 2" Drive Installed
Somfy Idler with 2.5" Drive Installed
9420800
|
 | |
| |
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy 9013592 2" Collapsible Idler w/10mm Shaft
|
|
The Somfy 9013592 2" Idler End Cap is used opposite the motor and can be used only with Somfy or Rollease 2" smooth wall shade tubes. The 9013592 Idler features a spring loaded 10mm shaft that allows for easier installation of the shade assembly within the mounted brackets. This idler is the easiest one to use with 2" smooth wall shade tubes and does not require any adapters. The use of this somfy idler with smooth wall tubes does require the end of the tube to be notched and the assembly must be either riveted or screwed in place.
Somfy 9013592 Collapsible Idler w/ 10mm Shaft
• Collapsible Spring Loaded 10mm Shaft
• Heavy Duty Constructions of Nylon and Steel
• Spring Loaded 10mm End Pin
• Includes Retaining clip
• 10mm Shaft Extension - 0.8"
• 10mm Shaft Compresses - 0.6125" (Minimum extension 0.1875")
• Insertion Depth: 1.83"
• Overall Length: 2.7"
9013592
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Sonesse 50 and LT50 - Star Head Motor Bracket 9410651
|
|
The Somfy 9410651 Motor Bracket is used to hold the head of Somfy star head motors. The supplied retaining clip automatically locks the head of the motor in place and prevent the shade assembly from being knock free. The 6410654 motor bracket accepts star head Sonesse 50, ST50 or LT50 motors. This Somfy bracket is constructed of 0.100" thick steel for heavy duty applications and is rated for total system loads up to 254 lb.
Somfy 9410651 Star Head Motor Bracket
• Heavy Duty Constructions of and Steel
• For use with Sonesse 50, ST50 and LT50 Motors Star Head Motors
• Retaining Ring Snaps in place to lock head of motor
• Max. System Load: 254 lb
• Max. Motor Torque: 50Nm , 440 in. lb
• Allows for Ceiling, Wall and Sde Mounting
• Overall Dimensions: 3.15" W x 3.75 H
• Material Thickness: 0.100" Thk
• Same part as Somfy # 6070513
• See the larger picture for additional dimensions
9410651
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Sonesse 50 and LT50 - Idler Bracket 10mm - 9410635
|
|
The Somfy 9410635 Idler Bracket is used opposite the motor bracket and allows for free spinning of motorized shade assembly. The nylon ball in the Idler Bracket accepts 10mm shafts and can be used with any Sonnesse 50, ST50 or LT50 motor with compatible 10mm Idler. This Somfy idler bracket features a hard nylon bearing that pivots to allow easier installation of the shade assembly and is heavy duty allowing for system loads up to 287 lb.
Somfy 9410635 10mm Idler Bracket
• Heavy Duty Constructions of Nylon and Steel
• For use with Sonesse 50, ST50 and LT50 Motors
• Accepts 10mm Idler Shafts
• Nylon Ball Bearing Pivots
• Max. System Load: 287 lb
• Max. Motor Torque: 50Nm , 440 in. lb
• Allows for Ceiling, Wall and Sde Mounting
• Overall Dimensions: 3.15" W x 3.75 H
• Material Thickness: 0.100" Thk
• Same part as Somfy # 6080254
• See the larger picture for additional dimensions
9410635
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Sonesse 50 and LT50 - Star Head Motor Bracket 9910021
|
|
The Somfy 9910021 Motor Bracket is used to hold the head of star head Somfy motors. The supplied retaining clip automatically locks the head of the motor in place and prevents the shade assembly from being knock free. The 9910021 motor bracket accepts star head Sonesse 50, ST50 or LT50 motors. This Somfy bracket is constructed of aluminum and is typically used to create custom bracket solutions
Somfy 9910021 Star Head Motor Bracket Without Angle Plate Specifications
· Compatible with Somfy LT50, ST50 Star Head Motor
· Aluminum Construction
· Locks Motor Head in position with spring clip
· Overall Diameter: 3.16"
· 1/4-20 Threaded Mounting Holes x 2
· 5/16 - 18 Threaded Mounting Holes x 2
9910021
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Sonesse 50 and LT50 - Idler Bracket 10mm - 9012657
|
|
The Somfy 9012657 idler bracket is pivoting ball bracket that is compatible with 10mm idlers. The pivoting nylon ball feature of this bracket allows the shade to be swung into position for easier installation. This bracket is typically used to create custom bracket solutions.
Somfy 9012657 10mm Idler Bracket Without Angle Plate Specifications
· Compatible with 10mm Idlers
· Steel and Nylon Construction
· Requires backing plate for use
· Overall Diameter: 1.92"
· Overall Height: 0.90"
· Steel Thickness: 0.080"
· 3 Mounting holes: 0.175" Diameter
9012657
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Sonesse 50 ST50 and LT50 Drive Stop 9910004
|
|
The Somfy 9910004 Drive Stop simply holds the drive gear in place on Somfy Sonesse 50 ST50 and LT50 motors. Please the appropriate drive onto the motor end and then install the drive stop with screw to hold the assembly in place.
Somfy 9910004 Drive Stop
• Holds the motor Drive Adapter in place
• Works with all Somfy Drives
• Sonesse 50 ST50 and LT50 Motors
• Includes Screw and Stop
• These are normally included with ST-50 motor.
• Special Order Item - Lead Time to Ship - 5 to 7 Days
Somfy Sonesse 50 with 2.5" Rollease Drive Installed
Somfy Sonesse 50 with 2" Somfy Drive Installed
9910004
|
|
|
Shipping
Policy
Request
Info / Quote
| Rollease 2.5" Crown and Drive Kit - RTA6U50
|
|
The Rollease RTA6U50 is a Crown and Drive adpeter kit to be used with Rollease 2.5" tubes and Somfy Sonesse 50 and LT50 Motors. One of the nice features of this kit is the use of a rubberized drive wheel that helps to minimize vibrations caused by the motor rotation. The use of the RTA6U50 also eliminates the need for notching and drilling the tube that would normally be required for use with these motor assemblies. One crown and drive kit is required for each end of the tube (1 Set for the motor and one set for the drive).
Rollease RTA6U50 Crown and Drive Kit
• For use with Rollease 2.5 Tubes and Somfy Sonesse 50 / LT 50 Motors
• 2 Kits Required for each Motorized Tube Assembly
• Features Rubber Drive Wheel
• Includes 1 Crown, 1 Drive and Screws
Rollease 2.5" Tube with Crown Installed
Rollease 2.5" Tube with Crown and Idler Installed
RTA6U50
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy 9410648 Universal Intermediate Link Bracket w/ 2" Drives
|
|
The Somfy 9410648 Universal Intermediate Link Bracket Kit is used to link 1 motor multiple shades reducing the number of motors required. This link bracket also reduces the number of brackets required and best of all it reduces the light gap to 0.50" minimum. (Up to 0.75 is typical). The 9410648 comes with 2" hard clip drives installed but these can be removed and replaced with other drives for added compatibility like the Rollease 2.5" RTA6U50 crown and drive kit. As is the case with most heavy duty components the use of this idler with smooth wall tubes does require the end of the tube to be notched and the assembly must be either riveted or screwed in place. The nice thing with the 2.5" rollease tubes is that no modification is necessary to the tube since their tube design features an aggressive internal rib pattern.
Somfy 9410648 Universal Intermediate Link Bracket
• Universal Design for use with a wide range of tubes
• Comes with 2" Smooth Wall Tube Drives
• Includes Retaining clip
• Special Order Item - Lead Time to Ship - 5 to 7 Days
CAUTION: The use of these link compoents reduces the lifting capacity of motors by 10% per link. Size you motor accordingly.
The compatible motor head bracket is not listed on our website. Do not use the 9410651!! More info Coming!!!
Somfy 9410648 Intermediate Link Bracket Assembled
9410648
|
|
|
Shipping
Policy
Request
Info / Quote
| Roller Shade Tubes 1.25" to 2.5" for All types of Shades
|
|
|
Shipping
Policy
Request
Info / Quote
| Roller Shade Double Sided Tape 36 yd Roll
|
|
WDouble Sided Roller Shade Tape supplied by Rollease for securing shade material to Rollease tubes. Even though the rollease tubes come with tape we recommend using 2 strips. Using 2 strips holds heavy materials better and helps to protect against tape failure due to inadvertant excessive pulling on shade past its stop limits.
Double Sided Roller Shade Tape:
· Double Sided Tape
· Width: 1.525”
· Thickness: 0.425”
· Length: 36 yd Roll
ShadeTape
|
|
|
|