---

Shipping Policy

Request Info / Quote

Furez BSC11-DIY - Custom Cable Splitter - DIY Version

The Furez BC11-DIY custom cable splitter provides a professional way to transition a multi-conductor speaker cable into individual conductors without the use of heat shrink boots. The DIY Version of the BCS11 custom cable splitter provides a front washer that is blank and additional machining of the front washer is required for use. The use of a clear anodized aluminum finish on the customizable parts of the cable splitter ensure the cleanest possible appearance after machining.     The Furez custom speaker cable splitters are constructed of anodized aluminum with removable front and rear end caps. Our unique design conceals the opposing cable hold down set screws for the cleanest possible appearance. Unlike heat shrinkable breakout cable boots, the Furez custom cable splitters can easily be reused if a mistake is made in the cable assembly or if you change the speaker cable configuration. Our DIY version of this cable splitter provides the utmost flexibility for use with a wide array of cables and manufacturers. Furez BCS11-DIY Custom Cable Splitter Features/Specifications:     •    DIY Speaker Cable Splitter - Requires Additional Machining     •    Anodized Aluminum Construction     •    Concealed Cable Hold Down Set Screws     •    Removable Front and Rear End Caps     •    Main Body ID: 0.618" (15.7mm)     •    Cable Entry ID (As Supplied): 0.433" (11mm)     •    Conductor Exit: Blank - Requires Machining     •    Overall Dimensions: 1.69" (43mm) L x 0.78" (19.9mm) Dia     •    Includes: 4mm Set Screws, 5mm Set Screws and 1 - Blank Washer     •    Optional Items:             -    Spare Blank Washer 10% Discount 4 to 8 15% Discount 8 or More BCS11

Spare Blank Washers No Thanks Add 1 Washer + $1.19 Add 2 Washers + $2.25

 

---

Shipping Policy

Request Info / Quote

ViaBlue SC4-2 Custom Cable Splitter 1 in 2 Out

The ViaBlue SC4-2 custom cable splitters provide a professional way to terminate braided sleeves or stripped speaker cable jackets without the use of heat shrink or cable boots on two or 4 conductor paired speaker cables. These custom speaker cable splitters are constructed of solid aluminum with a removable cap and washer for easy cable placement. The cable is securely held in place using opposing set screws. The SC4-2 Splitter is most commonly used with the Viable SC4 Speaker Cables in a Bi-Wire Speaker Configuration and can be used with any similarly sized 2 or 4 conductor speaker cable. We also use this splitter to dress up the 12-2P-UC THX Custom Speaker Cable 12AWG 4 Conductor paired down to a 2 conductor cable with braided sleeving.   ViaBlue SC4-2 Custom Speaker Cable Splitter Specifications     •    1 In 2 Out Custom Speaker Cable Splitter     •    Anodized Aluminum Construction     •    Provides Clean Transition from Speaker Cable Jacket to Individual Conductors     •    Professional replacement for cable boots and or heat shrink     •    Single Cable entry ID 13.5mm (0.531")     •    Dual Cable Exit ID 8.0mm (0.315")     •    Overall Dimensions: 1.57" L x 0.7925" Diameter     •    Sold Per Each   Automatic Quantity Discounts Applied 10% Discount on Quantities of 5 to 10 15% Discount on Quantities over 10   SC4-2

Larger Custom Cable Splitter

 

---

Shipping Policy

Request Info / Quote

ViaBlue SC4-4 Custom Cable Splitter 1 in 4 Out

The ViaBlue SC4-4 custom cable splitters provide a professional way to terminate braided sleeves or stripped speaker cable jackets without the use of heat shrink or cable boots on 4 conductor speaker cables. These custom speaker cable splitters are constructed of solid aluminum with a removable cap and washer for easy cable placement. The cable is securely held in place using opposing set screws. The SC4-4 Splitter is most commonly used with the Viable SC4-4 Speaker Cables in a Bi-amp and Bi-Wire Speaker Configuration and can be used with any similarly sized 4 conductor speaker cable.   ViaBlue SC4-4 Custom Speaker Cable Splitter Specifications     •    1 In 4 Out Custom Speaker Cable Splitter     •    Anodized Aluminum Construction     •    Provides Clean Transition from Speaker Cable Jacket to Individual Conductors     •    Professional replacement for cable boots and or heat shrink     •    Single Cable entry ID 13.5mm (0.531")     •    Dual Cable Exit ID 5.0mm (0.197")     •    Overall Dimensions: 1.57" L x 0.7925" Diameter     •    Sold Per Each   Automatic Quantity Discounts Applied 10% Discount on Quantities of 5 to 10 15% Discount on Quantities over 10 SC4-4

Larger Custom Cable Splitter

 

---

Shipping Policy

Request Info / Quote

ViaBlue SC2 Custom Cable Splitter 1 in 2 Out

The ViaBlue SC2 custom cable splitters provide a professional way to terminate braided sleeves or stripped speaker cable jackets  without the use of heat shrink or cable boots on two conductor speaker cables. These custom speaker cable splitters are constructed of solid aluminum with a removable cap and washer for easy cable placement. The cable is securely held in place using opposing set screws. The SC2 Splitter is most commonly used with the SC2 Silver Hybrid Custom Speaker Cable but can be used with any similarly sized speaker cable.     ViaBlue SC2 Custom Speaker Cable Splitter Specifications     •    1 In 2 Out Custom Speaker Cable Splitter     •    Anodized Aluminum Construction     •    Provides Clean Transition from Speaker Cable Jacket to Individual Conductors     •    Professional replacement for cable boots and or heat shrink     •    Single Cable entry ID 11.5mm (0.453")     •    Dual Cable Exit ID 5.0mm (0.197")     •    Overall Dimensions: 1.57" L x 0.7925" Diameter     •    Sold Per Each   Automatic Quantity Discounts Applied 10% Discount on Quantities of 5 to 10 15% Discount on Quantities over 10 SC2

Larger Custom Cable Splitter

 

---

Shipping Policy

Request Info / Quote

ViaBlue NF Ferrite Core Filter Custom Cable Splitter 1 in 1 Out

The ViaBlue NF Ferrite Core Filter Splitter is a 1 in and 1out configuration with a removable ferrite core magnet. The ferrite core acts as a sheath current filter to reduce EMI and RF interference resulting in a clean noise free signal. This splitter also provides a professional way to terminate braided sleeves without the use of heat shrink or cable boots. These splitters are constructed of solid aluminum and have a removable ferrite core. Two opposing gold plated set screws are used to hold the cable in place . Can be used to for video, analog audio, digital audio and speaker cables. ViaBlue NF Ferrite Custom Cable Splitter Specifications     •    1 In - 1 Out Custom Cable Splitter     •    Includes Removable EMI/RFI Ferrite Core     •    Anodized Aluminum Construction     •    Provides Clean Transition from Braided Cable to Raw Cable     •    Cable entry ID 9.5mm (0.374")     •    Cable Exit ID 9.0mm (0.354")     •    Overall Dimensions: 1.57" L x 0.7925" Diameter     •    Sold Per Each including Ferrite Core   Automatic Quantity Discounts Applied 10% Discount on Quantities of 5 to 10 15% Discount on Quantities over 10     NF

Large Custom Cable NF Splitter

 

---

Shipping Policy

Request Info / Quote

Work Boxes - Low, Voltage, Dual Voltage, Recessed Etc.

Very Large Selection of Work Boxes Available Too Many to List On This Page.   Main Work Box Index Page Starting Point for various Work Boxes, Retrofit, New Construction, Recessed, Low Voltage, Dual Voltage Etc.   Retrofit Power and Low Voltage Work Boxes Use Retrofit open back boxes where sheetrock or paneling is already in place. These utility work boxes feature flags that flip over to clamp onto paneling. Single Gang Retrofit - Low Voltage Boxes / Brackets Dual Gang Retrofit - Low Voltage Boxes / Brackets Triple 3 Gang Retrofit - Low Voltage Boxes / Brackets Quad 4 Gang Retrofit - Low Voltage Boxes / Brackets Dual Voltage Retrofit - Work Boxes Recessed Flat Panel  Retrofit - AV Cable Boxes All Retrofit Work Boxes & Low Voltage Boxes New Construction - NC Power and Low Voltage Work Boxes Use New Construction open back boxes where metal or studs are exposed. These utility work boxes feature either screws or nail to secure the box existing metal or wood studs.   Single Gang NC - Low Voltage Boxes   Dual Gang NC - Low Voltage Boxes   Dual Voltage NC - Work Boxes   Recessed Flat Panel NC - AV Cable Boxes   Fan and Fixture Boxes NC - Work Boxes   All NC Work Boxes and Low Voltage Boxes   Work-Boxes

 

---

Shipping Policy

Request Info / Quote

Wall Plate and Panel Mount Connectors - RCA, F-Pin, RJ45, RJ11 Etc.

Wall Plate Connectors for Audio, Video and Communications Most of our AV Connectors can be used in Hole Plates, Keystone Plates or can simply be Panel Mounted Speaker Terminals 5 Way Binding Posts and Banana Jacks Panel Mount Speaker Terminals Communications Terminals CAT5E, Telephone, RJ45, RJ11 Communications Keystone Jacks Analog Audio RCA Panel Mount Jacks RCA Female to Female Jacks Audio RCA Panel Mount Jacks Video RCA Panel Mount Jacks RCA, F-Pin, F-Pin to RCA Etc. Audio RCA Panel Mount Jacks Wall Plate Connectors

 

---

Shipping Policy

Request Info / Quote

Wall Plates - Bulk Wire, Keystone, Hole Plates, Connector Plates Etc.

Main Wall Plate Index Page Bulk Wire Plates, Nose Plates, Keystone Plates, Hole Plates, Decorator Trim Plates Etc. Wall-Plates

 

---

Shipping Policy

Request Info / Quote

Cable Management Solutions

Main Cable Management Index Page Heat Shrink, Tie Wraps, D-Rings, Conduit Straps, Expandable Braided Sleeves Etc. Cable Management

 

---