Shipping
Policy
Request
Info / Quote
| Altech PS-12024 Din Rail 24VDC - 5 Amp Power Supply
|
|
Altech PS-12024 24VDC 5 Amp Power Supply Specifications:
• Switchable Input Voltage - 110VAC to 240 VAC
• Input Current Requirements
- 100 to 120VAC - 3.3 Amp
- 200 to 240VAC - 2.0 Amp
• Output Voltage: 24VDC +/- 1%
• Output Current: 0 to 5A
• Two Sets of Output Connections for added flexibility
• Short Circuit, Overload, Over Voltage and Over Temperature Protection
• Convection Free Air Cooling
• LED Indicator for Power On
• 100% Full Load Burn-in Tested
• UL Listed and Approved
• Mounts to 35mm DIN Rail
• Optional: 10 Foot - 18AWG 3 Cond. Power Cord
• Dimensions: 4.92" H x 2.58" W x 3.94"D
• Weight: 1.65 lb
• Warranty: 3 Year
Full Altech PS-12024 DIN Rail Power Supply Specifications PDF Spec.
View our DIN RAIL Products Index Page
PS-12024
|
 | |
| |
|
|
Shipping
Policy
Request
Info / Quote
| Altech PSP-24024 Din Rail 24VDC - 10 Amp Power Supply
|
|
Altech PSP-24024 24VDC 10 Amp Power Supply Specifications:
• Universal Input Voltage - 110VAC to 240 VAC
• Input Current Requirements
- 100 to 120VAC - 2.8 Amp
- 200 to 240VAC - 1.4 Amp
• Output Voltage: 24VDC +/- 1%
• Output Current: 0 to 10A
• Two Sets of Output Connections for added flexibility
• Short Circuit, Overload, Over Voltage and Over Temperature Protection
• Convection Free Air Cooling
• LED Indicator for Power On
• 100% Full Load Burn-in Tested
• UL Listed and Approved
• Mounts to 35mm DIN Rail
• Optional: 10 Foot - 18AWG 3 Cond. Power Cord
• Dimensions: 4.92" H x 4.94" W x 3.94"D
• Weight: 2.8 lb
• Warranty: 3 Year
Full Altech PSP-24024 DIN Rail Power Supply Specifications PDF Spec.
View our DIN RAIL Products Index Page
PSP-24024
|
| |
| |
|
|
|
Shipping
Policy
Request
Info / Quote
| Power Cord 10 Foot 18AWG 3 Conductor - Non Terminated
|
|
10' Power 18 AWG Power Cord Specifications:
• Heavy Duty 18AWG 3 Conductor Construction
• 3-prong Grounded Male Plug (NEMA 5-15-P)
• Opposite End of Cord Not Terminated
• Length 10 Feet
• Warranty: Lifetime
View our DIN RAIL Products Index Page
03134
|
|
|
Shipping
Policy
Request
Info / Quote
| IDEC BNDN1000 Aluminum 35mm DIN RAIL 1 Foot
|
|
The IDEC BDNDN1000 35mm Aluminum DIN Rail is a standard size at the 7.5mm depth and can be used with a wide array of DIN Rail products. We choose to use and offer Aluminum becuase it is easy to cut, light weight and it will not rust. Our current Aluminum DIN Rail offering is limited to lengths up to 3 Feet in 1 Foot Increments and is supplied with slotted holes for easy mounting. Aluminum DIN Rail is a little more expensive than the typical steel DIN but we see it as a worth while expense. At this time we do not offer steel DIN rail.
IDEC BNDN1000 35mm Aluminum Din Rail Specifications:
• 35mm W x 8.5mm Inside Depth
• Extruded Aluminum
• Slotted Holes for Easy Mounting
• Length: 12" +/- 0.125"
View our DIN RAIL Products Index Page
BDND1000-1
|
|
|
Shipping
Policy
Request
Info / Quote
| IDEC BNDN1000 Aluminum 35mm DIN RAIL 2 Foot
|
|
The IDEC BDNDN1000 35mm Aluminum DIN Rail is a standard size at the 7.5mm depth and can be used with a wide array of DIN Rail products. We choose to use and offer Aluminum becuase it is easy to cut, light weight and it will not rust. Our current Aluminum DIN Rail offering is limited to lengths up to 3 Feet in 1 Foot Increments and is supplied with slotted holes for easy mounting. Aluminum DIN Rail is a little more expensive than the typical steel DIN but we see it as a worth while expense. At this time we do not offer steel DIN rail.
IDEC BNDN1000 35mm Aluminum Din Rail Specifications:
• 35mm W x 8.5mm Inside Depth
• Extruded Aluminum
• Slotted Holes for Easy Mounting
• Length: 24" +/- 0.125"
View our DIN RAIL Products Index Page
BDND1000-2
|
|
|
Shipping
Policy
Request
Info / Quote
| IDEC BNDN1000 Aluminum 35mm DIN RAIL 3 Foot
|
|
The IDEC BDNDN1000 35mm Aluminum DIN Rail is a standard size at the 7.5mm depth and can be used with a wide array of DIN Rail products. We choose to use and offer Aluminum becuase it is easy to cut, light weight and it will not rust. Our current Aluminum DIN Rail offering is limited to lengths up to 3 Feet in 1 Foot Increments and is supplied with slotted holes for easy mounting. Aluminum DIN Rail is a little more expensive than the typical steel DIN but we see it as a worth while expense. At this time we do not offer steel DIN rail.
IDEC BNDN1000 35mm Aluminum Din Rail Specifications:
• 35mm W x 8.5mm Inside Depth
• Extruded Aluminum
• Slotted Holes for Easy Mounting
• Length: 36" +/- 0.125"
View our DIN RAIL Products Index Page
BDND1000-3
|
|
|
Shipping
Policy
Request
Info / Quote
| Altech DDFL4U Double Level Fused DIN Rail Terminal Block
|
|
The Altech DDFL4U is a double level fused terminal block for use with 35mm DIN Rails, The top level of the DDFL4U accepts 5mm x 20mm or 5mm x 25mm fuses for device protection and the bottom level is a separate independent feed through. The use of this double level terminal block greatly reduces space by eliminating the need for separate terminal blocks when two leads per device are required as with DC circuits. Convenient ID Tags are available for device labeling and we also offer this DIN Rail product in custom colors.
Altech DDFL4U Double Level Fused Terminal Block Specifications:
• Top Level Fused - Fuse not Included
• Fuse Lever Holds 2 Fuses: 1 In Use and 1 Spare
• Both levels independent of each other
• Stocked Color: Gray
• Constructed of Polyamide 6.6
• Wire Gauges Accepted: 22 - 10 AWG
• Maximum Voltage - 600V
• Current Rating:
- Top Level: 6.3A
- Bottom Level: 35A
• UL and CSA Listed
• Mounts to 35mm DIN Rail
• Dimensions (WxHxD): 0.314" x 2.598" x 3.464" (8mm x 66mm x 88mm)
• Sold Per Piece
View our DIN RAIL Products Index Page
DDFL4U
|
|
|
Shipping
Policy
Request
Info / Quote
| Altech CSFL4U Fused DIN Rail Terminal Block
|
|
The Altech CSFL4U is a single level fused terminal block for use with 35mm DIN Rails, The CSFL4U accepts 5mm x 20mm and 5mm x 25mm fuses for device protection. Convenient ID Tags are available for device labeling and we also offer this DIN Rail product in custom colors. Our Std. Color for the CSFL4U is RED.
Altech CSFL4U Fused Terminal Block Specifications:
• Single Level Fused Terminal Block
• Fuse Lever Holds 2 Fuses: 1 In Use and 1 Spare
• Stocked Color: RED
• Constructed of Polyamide 6.6
• Wire Gauges Accepted: 22 - 10 AWG
• Maximum Voltage - 600V
• Current Rating: 16A
• UL and CSA Listed
• Mounts to 35mm DIN Rail
• Dimensions (WxHxD): 0.314" x 1.692" x 2.283" (8mm x 43mm x 58mm)
• Sold Per Piece
View our DIN RAIL Products Index Page
CSFL4U-R
|
|
|
Shipping
Policy
Request
Info / Quote
| Altech CTS6U DIN Rail Terminal Block
|
|
The Altech CTS6U is a single level terminal block for use in a wide variety of applications. Convenient ID Tags are available for device labeling and we also offer this DIN Rail product in custom colors. Our Std. Color for the CTS6U is Black.
Altech CTS6U Fused Terminal Block Specifications:
• Single Level Terminal Block
• Stocked Color: BLACK
• Constructed of Polyamide 6.6
• Wire Gauges Accepted: 22 - 8 AWG
• Maximum Voltage - 600V
• Current Rating: 50A
• UL and CSA Listed
• Mounts to 35mm DIN Rail
• Dimensions (WxHxD): 0.314" x 1.850" x 1.692" (8mm x 47mm x 43mm)
• Sold Per Piece
View our DIN RAIL Products Index Page
CTS6U-B
|
|
|
Shipping
Policy
Request
Info / Quote
| Altech EPDDFL4U Double Terminal Block End Plate
|
|
The Altech EPDDFL4U is an end plate for use with the Altech DDFL4U double level DIN Rail terminal blocks. The Terminal Block end plate is only required on one end of a series of DDFL4U terminal blocks. The cover plate closes the exposed side of the DIN Rail terminal block protecting against potential hazards. The end plate is simple to use and snaps in place. We also offer this DIN Rail product in custom colors and our standard stocked product is Gray
Altech EPDDFL4U Double Terminal Block End Plate Specifications:
• End Plate for Altech DDFL4U terminal Blocks
• Stocked Color: Gray
• Constructed of Polyamide 6.6
• Thickness: 0.120" (3.04mm)
• Sold Per Piece
View our DIN RAIL Products Index Page
EPDDFL4U
|
|
|
Shipping
Policy
Request
Info / Quote
| Altech EPCSFL4U Terminal Block End Plate
|
|
The Altech EPCSFL4U is an end plate for use with the Altech CSFL4U DIN Rail terminal blocks. The Terminal Block end plate is only required on one end of a series of CSFL4U terminal blocks. The cover plate closes the exposed side of the DIN Rail terminal block protecting against potential hazards. The end plate is simple to use and snaps in place. We also offer this DIN Rail product in custom colors and our standard stocked product is RED.
Altech EPCSFL4U Terminal Block End Plate Specifications:
• End Plate for Altech CSFL4U Terminal Blocks
• Stocked Color: RED
• Constructed of Polyamide 6.6
• Thickness: 0.058" (1.46mm)
• Sold Per Piece
View our DIN RAIL Products Index Page
EPCSFL4U-R
|
|
|
Shipping
Policy
Request
Info / Quote
| Altech EP6/10U Terminal Block End Plate
|
|
The Altech EP6/10U is an end plate for use with the Altech CTS6U and CTS10U DIN Rail terminal blocks. The Terminal Block end plate is only required on one end of a series of CTS6U or CTS10U terminal blocks. The cover plate closes the exposed side of the DIN Rail terminal block protecting against potential hazards. The end plate is simple to use and snaps in place. We also offer this DIN Rail product in custom colors and our standard stocked product is GRAY.
Altech EP6/10U Terminal Block End Plate Specifications:
• End Plate for Altech CTS6U and CTS10U
• Stocked Color: GRAY
• Constructed of Polyamide 6.6
• Thickness: 0.060" (1.53mm)
• Sold Per Piece
View our DIN RAIL Products Index Page
EP6/10U
|
|
|
Shipping
Policy
Request
Info / Quote
| Altech CA711 External Jumpng Strips
|
|
The Altech CA711 is a 10 position external jumping strip for use with Altech CSFL4U and DDFL4U DIN Rail terminal blocks. The the use of this external jumper greatly reduces wiring time when a series of terminal blocks are to be connected with the same device as in the case of power supplies. The CA711 jumper can be cut down for use with less than 10 terminal blocks.
Altech CA711 Terminal Block Externial Jumper Specifications:
• 10 Position External Jumper
• Can be Cut to Shorter Lengths
• Compatible with CSFL4U and DDFL4U Terminal Blocks
• Constructed of Tinned Brass and Copper
• Protective Covering On Exposed Edge
• Tab Width: 0.100" (2.40mm)
• Tab Length: 0.413" (10.5mm)
• Overall Strip Width: 3.0" (76.44mm)
• Sold as a 10 Position Strip
View our DIN RAIL Products Index Page
CA711
|
|
|
Shipping
Policy
Request
Info / Quote
| Altech CA710 External Jumpng Strips
|
|
The Altech CA710 is a 10 position external jumping strip for use with Altech CTS6U DIN Rail terminal blocks. The the use of this external jumper greatly reduces wiring time when a series of terminal blocks are to be connected with the same device as in the case of power supplies. The CA710 jumper can be cut down for use with less than 10 terminal blocks.
Altech CA710 Terminal Block Externial Jumper Specifications:
• 10 Position External Jumper
• Can be Cut to Shorter Lengths
• Compatible with CTS6U Terminal Blocks
• Constructed of Tinned Brass and Copper
• Protective Covering On Exposed Edge
• Tab Width: 0.163" (4.1mm)
• Tab Length: 0.605" (15.36mm)
• Overall Strip Width: 3.068" (77.92mm)
• Sold as a 10 Position Strip
View our DIN RAIL Products Index Page
CA710
|
|
|
Shipping
Policy
Request
Info / Quote
| Altech MT8 ID Marking Tags for Terminal Block
|
|
The Altech MT8 is a marking tag labeled 1 thru 10 for use with Altech CSFL4U,DDFL4U and CTS6U DIN Rail terminal blocks. The MT8 ID marking tags are for use on the body of the DIN Rail terminal block and can not be used on fuse levers. The use of these marking tags make labeling of circuits a breeze and the blocks can be quickly identified.
Altech MT8 ID Marking Tags Specifications:
• Premarked Strip of 1 Thru 10
• Compatible with CSFL4U, DDFL4U and CTS6U Bodies
• White with Black Printing
• Sold as a Strip Marked 1 thru 10
View our DIN RAIL Products Index Page
MT8
|
|
|
Shipping
Policy
Request
Info / Quote
| Altech MT2 ID Marking Tags for Terminal Blocks
|
|
The Altech MT2 is a marking tag labeled 1 thru 10 for use with Altech CSFL4U and DDFL4U DIN Rail terminal blocks. The MT2 ID marking tags are for use on the Fuse Levers of the DIN Rail terminal blocks and can not be used on the bodies. The use of these marking tags make labeling of circuits a breeze and the blocks can be quickly identified.
Altech MT2 ID Marking Tags Specifications:
• Premarked Strip of 1 Thru 10
• Compatible with CSFL4U and DDFL4U Fuse Levers
• White with Black Printing
• Sold as a Strip Marked 1 thru 10
View our DIN RAIL Products Index Page
MT2
|
|
|
Shipping
Policy
Request
Info / Quote
| Altech CA802 End Stop for 35mm DIN Rails
|
|
The Altech CA802 is an End Stop that can be used on any 35mm DIN Rail. The CA802 End Stop prevents products from sliding on the DIN Rail. The end stop snaps in place and then is secured with a screw.
Altech CA802 DIN Rail End Stop Specifications:
• 35mm DIN Rail Compatible
• Constructed of Polyamide 6.6
• Locks Down with Screw
• Dimensions (WxHxD): 0.314" x 1.259" x 1.771" (8mm x 32mm x 45mm)
View our DIN RAIL Products Index Page
CA802
|
|
|
Shipping
Policy
Request
Info / Quote
| Schurter Fuse 0034.3120 - 5mm x 20mm - Slow Blow 2A
|
|
The Schurter 0034.3120 is 2 AMP 5mm x 20mm Slow Blow Fuse for use with the DDFL4U and CSFL4U fused DIN Rail Terminal Blocksl.
Schurter 0034.3120 Fuse Specifications:
• 5mm x 20mm Fuse
• 2 Amp Slow Blow
• Compatible with DDFL4U and CSFL4U Terminal Blocks
• Rated up to 250V AC/DC
View our DIN RAIL Products Index Page
0034.3120
|
|
|
Shipping
Policy
Request
Info / Quote
| Liberty 18-2C-P 18 AWG 2 Conductor Plenum In-Wall Rated Cable
|
|
Liberty 18-2C-P Control Wire Specifications:
• 18 AWG
• 2 Conductor
• Jacket Color: White
• Plenum In-Wall Rated CL3
• Use for Audio, Instrumentiona, Control and Power Supply Applications
• Maximum Voltage: 300V
• Plenum PVC Insulation: 0.015" Thk. Nominal
• Red and Black Insulated Conductors
• Nylon Rip Cord
• Stranded Copper Conductors
• Nominal Overall Diamter: 0.154"
• Stocked in 1000' Spools
• Sold Per Foot: Specify Qty as # of Feet
Full Liberty 18-2C-P Plenum 18AWG 2 Conductor Control Wire Specifications PDF Spec.
18-2C-P
|
|
|
Shipping
Policy
Request
Info / Quote
| Liberty 18-2C-P 18 AWG 2 Conductor - 1000' Spool
|
|
Liberty 18-2C-P Control Wire Specifications:
• 18 AWG
• 2 Conductor
• Jacket Color: White
• Plenum In-Wall Rated CL3
• Use for Audio, Instrumentiona, Control and Power Supply Applications
• Maximum Voltage: 300V
• Plenum PVC Insulation: 0.015" Thk. Nominal
• Red and Black Insulated Conductors
• Nylon Rip Cord
• Stranded Copper Conductors
• Nominal Overall Diamter: 0.154"
• Stocked in 1000' Spools
• Sold As 1000' Spool
Full Liberty 18-2C-P Plenum 18AWG 2 Conductor Control Wire Specifications PDF Spec.
18-2C-P-1000
|
|
|
|