Shipping
Policy
Request
Info / Quote
| Somfy Sonesse ST50 120VAC RTS RF Technology Roller Shade Motor
|
|
 
Larger Somfy Sonesse ST50 RTS RF Controlled Roller Shade Motor Image
The NEW Somfy Sonesse 50 ST50 Shade Motor is an ultra-quiet 120VAC motor designed for specific use with roller shades. The Sonesse ST50 motors are engineered with superior noise reduction technology and from a distance of 3 feet, are barely heard. The heavy duty Sonesse 50 motor is designed for tubes as small as 2” in
diameter and does not have any practical limits with respect to it use with roller shades.
The RTS version of the Somfy ST50 Motor is controlled via Somfy's RTS RF technology which offers the user single or group control as well as X10, Timer, RS232 Control etc. This is a simple, easy to use and easy to install solution for your shade motorization needs. The Somfy Sonesse 50 motor stores the limits set by the remote controls and memory is not lost when power is disconnected. The momentary press of a button you can command the shade to go to the Full up, Full Down and a customer specified preferred Position. No need to hold the button down and wait for the shade to reach the desired position.
Somfy Sonesse 50 ST50 RTS 120VAC Roller Shade Motor Specifications
• Operating Voltage: 120VAC
• Normal Current Draw: 0.95A
• Torque: 4Nm
• Lift Capacity
- 2" Tube: 35.2lb
- 2.5" Tube: 28lb
• Motor Speed: 32 RPM
• Ultra-Quiet Operation : 44dBa
• Rubber Drive Provides Quite Operation
• Pre-Integrated Compatible with Somfy RTS RF Control Technology
• Star Head Design Locks into Brackets
• Removable Power Cords - Supplied w/ Open Ends
• Compatible with 2" and Larger Shade Tubes - Adapters May be Required
• Requirements for use
- 120VAC Power
- RTS RF Remote
- 2" or Larger Roller Shade Tube
- Somfy Motor and Idler Brackets
- Crown and Drive Adapter to Match Tube
• Warranty 5 years
• Includes: Motor, Drive Stop and Power Cord
• Dimensions
- Overall: 31” L x 2.25” Dia
- Insertion Dia: 1.82"
- Tube insertion length: 30.125” App.
• Weight: App. 5.62lb
• Somfy Part # 1030065
• Minimum Shade Width
- App. 32.75" Tube Length with 2" Idler # 9013592
- App. 34.75" Tip to Tip Including Brackets with 2" Idler # 9013592
- App. 35.75" Tube Length with Universal Idler # 9420800
- App. 37.75" Tip to Tip Including Brackets with Universal Idler # 9420800
• Special Order Item - Lead Time to Ship - 5 to 7 Days
Somfy Sonesse 50 ST50 RTS Shade Motor Programming Instructions - PDF Document
View the Sonesse 50 ST50 Roller Shade Motor Installation Datasheet
Shade Installation Instructions - PDF
Main Roller Shade Components Index - LOTS of Shade Component Options
ST50-RTS
|
 | |
| |
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Sonesse 50 and LT50 2" Drive - 9206088
|
|
The Somfy 9206088 is a 2" Hard Clip Drive for use with Somfy or Rollease 2" Smooth Wall Tubes and Somfy Sonesse 50 ST50 or LT50 Motors. The use of this drive requires the use of a drive stop. Since the tubes are smooth wall the user is required to drill a hole through the tube and into the drive. A rivet or screws may be used and 4 rivets or screws are rerquired. We prefer to countersink holes in the tube and use screws but some do use rivets and then grind the head of the rivet smooth to the tube.
Somfy 9206088 2" Drive
• Compatible with Somfy Sonesse 50 / LT 50 Motors
• Compatible with 2" Somfy or Rollease Smooth Wall Tubes
• 1 Drive required for Motor
• 1 Drive required for Idler
Somfy ST50 Motor with 2" Drive Installed
Somfy Idler with 2" Drive Installed
9206088
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy 9420800 Universal Idler w/10mm Collapsible Shaft
|
|
The Somfy 9420800 Universal Idler End Cap is used opposite the motor and can be used for a variety of tube sizes. The 9420800 Idler features a spring loaded 10mm shaft that allows for easier installation of the shade assembly within the mounted brackets. This idler can NOT be used by it self it must be used in conjunction with the appropriate drive for the specified tube size being used. We stock this idler for use with the Somfy or Rollease 2" smooth wall tubes which requires the use of the Somfy 9206088 2" Hard clip Drive and we also stock this idler for use with the Rollease 2.5" tube which requires the Rollease RTA6U50 crown and drive kit. As is the case with most heavy duty components the use of this idler with smooth wall tubes does require the end of the tube to be notched and the assembly must be either riveted or screwed in place. The nice thing with the 2.5" rollease tubes is that no modification is necessary to the tube since their tube design features an aggressive internal rib pattern. The Universal idler does come with a retaining clip to hold the drive on the idler assembly.
Somfy 9420800 Universal Collapsible Idler
• Universal Design for use with a wide range of tubes
• Heavy Duty Constructions of Delrin and Steel
• Spring Loaded 10mm End Pin
• Includes Retaining clip
• Requires Compatible Drive Wheel - Not Included
- 9206088 - Somfy 2" Hard Clip Drive for 2" Somfy/Rollease Smooth Wall Tube
- RTA6U50 - Rollease 2.5 Crown Drive Adapter Kit for 2.5 Somfy Tube
• 10mm Shaft Extension - 1.6"
• 10mm Shaft Compresses - 1.2" (Minimum extension 0.40")
• Overall Insertion Depth without Attached Drive: 3.7"
• Overall Length: 5.4"
Somfy 9420800 Idler Instructions - Sorry we could not get them in English
Somfy Idler with 2" Drive Installed
Somfy Idler with 2.5" Drive Installed
9420800
|
| |
| |
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy 9013592 2" Collapsible Idler w/10mm Shaft
|
|
The Somfy 9013592 2" Idler End Cap is used opposite the motor and can be used only with Somfy or Rollease 2" smooth wall shade tubes. The 9013592 Idler features a spring loaded 10mm shaft that allows for easier installation of the shade assembly within the mounted brackets. This idler is the easiest one to use with 2" smooth wall shade tubes and does not require any adapters. The use of this somfy idler with smooth wall tubes does require the end of the tube to be notched and the assembly must be either riveted or screwed in place.
Somfy 9013592 Collapsible Idler w/ 10mm Shaft
• Collapsible Spring Loaded 10mm Shaft
• Heavy Duty Constructions of Nylon and Steel
• Spring Loaded 10mm End Pin
• Includes Retaining clip
• 10mm Shaft Extension - 0.8"
• 10mm Shaft Compresses - 0.6125" (Minimum extension 0.1875")
• Insertion Depth: 1.83"
• Overall Length: 2.7"
9013592
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Sonesse 50 and LT50 - Star Head Motor Bracket 9410651
|
|
The Somfy 9410651 Motor Bracket is used to hold the head of Somfy star head motors. The supplied retaining clip automatically locks the head of the motor in place and prevent the shade assembly from being knock free. The 6410654 motor bracket accepts star head Sonesse 50, ST50 or LT50 motors. This Somfy bracket is constructed of 0.100" thick steel for heavy duty applications and is rated for total system loads up to 254 lb.
Somfy 9410651 Star Head Motor Bracket
• Heavy Duty Constructions of and Steel
• For use with Sonesse 50, ST50 and LT50 Motors Star Head Motors
• Retaining Ring Snaps in place to lock head of motor
• Max. System Load: 254 lb
• Max. Motor Torque: 50Nm , 440 in. lb
• Allows for Ceiling, Wall and Sde Mounting
• Overall Dimensions: 3.15" W x 3.75 H
• Material Thickness: 0.100" Thk
• Same part as Somfy # 6070513
• See the larger picture for additional dimensions
9410651
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Sonesse 50 and LT50 - Idler Bracket 10mm - 9410635
|
|
The Somfy 9410635 Idler Bracket is used opposite the motor bracket and allows for free spinning of motorized shade assembly. The nylon ball in the Idler Bracket accepts 10mm shafts and can be used with any Sonnesse 50, ST50 or LT50 motor with compatible 10mm Idler. This Somfy idler bracket features a hard nylon bearing that pivots to allow easier installation of the shade assembly and is heavy duty allowing for system loads up to 287 lb.
Somfy 9410635 10mm Idler Bracket
• Heavy Duty Constructions of Nylon and Steel
• For use with Sonesse 50, ST50 and LT50 Motors
• Accepts 10mm Idler Shafts
• Nylon Ball Bearing Pivots
• Max. System Load: 287 lb
• Max. Motor Torque: 50Nm , 440 in. lb
• Allows for Ceiling, Wall and Sde Mounting
• Overall Dimensions: 3.15" W x 3.75 H
• Material Thickness: 0.100" Thk
• Same part as Somfy # 6080254
• See the larger picture for additional dimensions
9410635
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Sonesse 50 and LT50 - Star Head Motor Bracket 9910021
|
|
The Somfy 9910021 Motor Bracket is used to hold the head of star head Somfy motors. The supplied retaining clip automatically locks the head of the motor in place and prevents the shade assembly from being knock free. The 9910021 motor bracket accepts star head Sonesse 50, ST50 or LT50 motors. This Somfy bracket is constructed of aluminum and is typically used to create custom bracket solutions
Somfy 9910021 Star Head Motor Bracket Without Angle Plate Specifications
· Compatible with Somfy LT50, ST50 Star Head Motor
· Aluminum Construction
· Locks Motor Head in position with spring clip
· Overall Diameter: 3.16"
· 1/4-20 Threaded Mounting Holes x 2
· 5/16 - 18 Threaded Mounting Holes x 2
9910021
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Sonesse 50 and LT50 - Idler Bracket 10mm - 9012657
|
|
The Somfy 9012657 idler bracket is pivoting ball bracket that is compatible with 10mm idlers. The pivoting nylon ball feature of this bracket allows the shade to be swung into position for easier installation. This bracket is typically used to create custom bracket solutions.
Somfy 9012657 10mm Idler Bracket Without Angle Plate Specifications
· Compatible with 10mm Idlers
· Steel and Nylon Construction
· Requires backing plate for use
· Overall Diameter: 1.92"
· Overall Height: 0.90"
· Steel Thickness: 0.080"
· 3 Mounting holes: 0.175" Diameter
9012657
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Sonesse 50 ST50 and LT50 Drive Stop 9910004
|
|
The Somfy 9910004 Drive Stop simply holds the drive gear in place on Somfy Sonesse 50 ST50 and LT50 motors. Please the appropriate drive onto the motor end and then install the drive stop with screw to hold the assembly in place.
Somfy 9910004 Drive Stop
• Holds the motor Drive Adapter in place
• Works with all Somfy Drives
• Sonesse 50 ST50 and LT50 Motors
• Includes Screw and Stop
• These are normally included with ST-50 motor.
• Special Order Item - Lead Time to Ship - 5 to 7 Days
Somfy Sonesse 50 with 2.5" Rollease Drive Installed
Somfy Sonesse 50 with 2" Somfy Drive Installed
9910004
|
|
|
Shipping
Policy
Request
Info / Quote
| Rollease 2.5" Crown and Drive Kit - RTA6U50
|
|
The Rollease RTA6U50 is a Crown and Drive adpeter kit to be used with Rollease 2.5" tubes and Somfy Sonesse 50 and LT50 Motors. One of the nice features of this kit is the use of a rubberized drive wheel that helps to minimize vibrations caused by the motor rotation. The use of the RTA6U50 also eliminates the need for notching and drilling the tube that would normally be required for use with these motor assemblies. One crown and drive kit is required for each end of the tube (1 Set for the motor and one set for the drive).
Rollease RTA6U50 Crown and Drive Kit
• For use with Rollease 2.5 Tubes and Somfy Sonesse 50 / LT 50 Motors
• 2 Kits Required for each Motorized Tube Assembly
• Features Rubber Drive Wheel
• Includes 1 Crown, 1 Drive and Screws
Rollease 2.5" Tube with Crown Installed
Rollease 2.5" Tube with Crown and Idler Installed
RTA6U50
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy 9410648 Universal Intermediate Link Bracket w/ 2" Drives
|
|
The Somfy 9410648 Universal Intermediate Link Bracket Kit is used to link 1 motor multiple shades reducing the number of motors required. This link bracket also reduces the number of brackets required and best of all it reduces the light gap to 0.50" minimum. (Up to 0.75 is typical). The 9410648 comes with 2" hard clip drives installed but these can be removed and replaced with other drives for added compatibility like the Rollease 2.5" RTA6U50 crown and drive kit. As is the case with most heavy duty components the use of this idler with smooth wall tubes does require the end of the tube to be notched and the assembly must be either riveted or screwed in place. The nice thing with the 2.5" rollease tubes is that no modification is necessary to the tube since their tube design features an aggressive internal rib pattern.
Somfy 9410648 Universal Intermediate Link Bracket
• Universal Design for use with a wide range of tubes
• Comes with 2" Smooth Wall Tube Drives
• Includes Retaining clip
• Special Order Item - Lead Time to Ship - 5 to 7 Days
CAUTION: The use of these link compoents reduces the lifting capacity of motors by 10% per link. Size you motor accordingly.
The compatible motor head bracket is not listed on our website. Do not use the 9410651!! More info Coming!!!
Somfy 9410648 Intermediate Link Bracket Assembled
9410648
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Telis 1 Pure RTS Technology RF Remote 1 Channel
|
|
The Somfy Telis 1 Pure RTS RF Remote Control communicates with all Somfy RTS RF controllable devices. It is a single channel RF remote that can control an unlimited number of shades. All shades assigned to the Telis 1 Remote will operate simultaneously. The Telis remote can control an unlimited amount of motors or RTS interfaces. When used with the LT30 motors it controls Up, Down, Stop and customer preferred location commands. RTS technology RF Control devices have a 65’ range through 2 concrete walls and nearly a 100’ clear path range.
Somfy Telis 1 Pure RTS RF Remote Specifications:
· Communicates with all Somfy RTS RF Technology Devices
· Single Channel RF Remote
· Controls unlimited number of motors simultaneously
· 65 Foot Range
· Dimensions: 4.75” L x 1.75” W x 0.75” H
· Includes: Wall Button and mounting hardware
· Optional: Table Top Holder
· Somfy Part # 1810632
View the Telis Remote Set-Up Instructions
Telis1 Pure
|
| |
| |
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy Telis 4 Pure RTS Technology RF Remote 5 Channel
|
|
The Somfy Telis 4 RTS remote control communicates with all Somfy RTS RF controllable devices. The Telis 4 is a 5 channel RF remote that can control an unlimited number of shades. Shades or motors can be assigned to one or more channels on the remote. Each channel is individually selectable and you set the channels up the way you want. Each channel can be configured to control one or a group of shades. This is the remote to use if you want to isolate group control. You can have the kitchen on one channel, the living room on another or isolate based on location (east, west etc.) You can control each group separately or create an ALL shade channel to control every shade in the house. All shades or motors assigned to a specific channel will operate simultaneously. The Telis 4 controls Up, Down, Stop and customer preferred position commands..
Somfy Telis 4 RTS RF Remote Specifications:
· Communicates with all Somfy RTS RF Technology Devices
· Easily selectable 5 Channel RF Remote
· Controls unlimited number of motors simultaneously
· 65 Foot Range
· Dimensions: 4.75” L x 1.75” W x 0.75” H
· Includes: Wall Button and mounting hardware
· Optional: Table Top Holder
· Somfy Part # 1810633
View the Telis Remote Set-Up Instructions
Telis 4 Pure
|
| |
| |
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy DecoFlex 1 RTS Wireless Wall Switch - 1 Channel
|
|
The Somfy DecoFlex 1 RTS RF wall switch was designed with flexibility and appearance in mind. Each DecoFlex wireless wall switch is supplied with adhesive backed labels so each channel button can be named by you. The DecoFlex series of wireless RTS wall switches are also available in White Black or Ivory and we also have optional professional preprinted buttons for the ultimate in appearance.
The DecoFlex RTS wall switch communicates with all Somfy RTS RF controllable devices. The DecoFlex 1 is a single channel RTS RF remote that can control an unlimited number of Somfy RTS motors. All shades or motors assigned to a single channel will operate simultaneously. The DecoFlex controls Up, Down, Stop and customer preferred position commands.
Somfy DecoFlex 1 RTS Wireless Wall Switch Specifications:
• Communicates with all Somfy RTS RF Technology Devices and Motors
• Colors: White, Ivory and Black (Black costs more - see options)
• RTS Wireless Wall Switch
• Single Channel RTS Remote Control
• Controls unlimited number of motors simultaneously
• 65 Foot RTS RF Control Range
• Powered by Internal Replaceable Lithium Coin Cell Battery - Supplied
• Button labels provided w/ Light Gray & Dark Gray Text on clear backing
• Up / Down or Open / Closed and Stop Buttons Plus 1 Channel Button
• Includes: Mounting Bracket, Decora Trim Plate and Adhesive Backed Labels
• Dimensions: 4.75” L x 1.75” W x 0.75” H
• Optional: Professional Pre-Printed Channel Buttons White, Ivory or Black
• Optional: Professional Pre-Printed Command Buttons White, Ivory or Black
• Somfy Part # 1810897 White, 1810898 Ivory and 1810899 Black
View the DecoFlex Product Brochure
View the DecoFlex RTS Wall Switch Instructions
DecoFlex 1
|
|
| |
|
|
|
Shipping
Policy
Request
Info / Quote
| Somfy DecoFlex 5 Convertible RTS Wireless Wall Switch - 5 Channel
|
|
The Somfy DecoFlex 5 RTS RF wall switch was designed with flexibility and appearance in mind. The DecoFlex 5 can be converted to 2, 3 or 4 channels with the addition of optional faceplates and each DecoFlex wireless wall switch is supplied with adhesive backed labels so each channel button can be named by you. The DecoFlex series of wireless RTS wall switches are also available in White Black or Ivory and we also have optional professional preprinted buttons for the ultimate in appearance.
The DecoFlex RTS wall switch communicates with all Somfy RTS RF controllable devices. The DecoFlex 5 is a 5 channel RTS RF remote that can control an unlimited number of Somfy RTS Motors. Shades or motors can be assigned to one or more channels on the remote. Each channel is individually selectable and you set the channels up the way you want. Each channel can be configured to control one or a group of shades. This is the remote to use if you want to isolate group control. You can have the kitchen on one channel, the living room on another or isolate based on location (east, west etc.) You can control each group separately or create an ALL shade channel to control every shade in the house. All shades or motors assigned to a specific channel will operate simultaneously. The DecoFlex controls Up, Down, Stop and customer preferred position commands.
Somfy DecoFlex 5 RTS Wireless Wall Switch Specifications:
• Communicates with all Somfy RTS RF Technology Devices and Motors
• Colors: White, Ivory and Black (Black costs more - see options)
• RTS Wireless Wall Switch
• 5 Channels of Assignable RTS Remote Control
• Use the Channels as individual shade control or group shades together - You decide
• Controls unlimited number of motors simultaneously
• 65 Foot RTS RF Control Range
• Powered by Internal Replaceable Lithium Coin Cell Battery - Supplied
• Button labels provided w/ Light Gray & Dark Gray Text on clear backing
• Removable Buttons to convert to 2, 3, or 4 Channel DecoFlex Wall Switch
• Up / Down or Open / Closed and Stop Buttons Plus 5 Separate Channel Buttons
• Includes: Mounting Bracket, Decora Trim Plate and Adhesive Backed Labels
• Dimensions: 4.75” L x 1.75” W x 0.75” H
• Optional: 2, 3 and 4 Channel Face Plates White, Ivory or Black
• Optional: Professional Pre-Printed Channel Buttons White, Ivory or Black
• Optional: Professional Pre-Printed Command Buttons White, Ivory or Black
• Somfy Part # 1810813 White, 1810814 Ivory and 1810830 Black
View the DecoFlex Product Brochure
View the DecoFlex RTS Wall Switch Instructions
DecoFlex 5
|
|
| |
|
|
|
Shipping
Policy
Request
Info / Quote
| Roller Shade Tubes 1.25" to 2.5" for All types of Shades
|
|
|
Shipping
Policy
Request
Info / Quote
| Roller Shade Double Sided Tape 36 yd Roll
|
|
WDouble Sided Roller Shade Tape supplied by Rollease for securing shade material to Rollease tubes. Even though the rollease tubes come with tape we recommend using 2 strips. Using 2 strips holds heavy materials better and helps to protect against tape failure due to inadvertant excessive pulling on shade past its stop limits.
Double Sided Roller Shade Tape:
· Double Sided Tape
· Width: 1.525”
· Thickness: 0.425”
· Length: 36 yd Roll
ShadeTape
|
|
|
Related Items
Related Items:
Roller Shade and Window Treatments
Index Page and
Roller Shade Components
Index Page
Product Specific Pages
Rollease
Roller Shade Brackets
Rollease
Roller Shade Tubes
Rollease End
Plugs
Roller Shade
External Hem Bars
Rollease
Roller Shade Clutch Components
Roller Shade
Black-Out Track Components
Rollease
Skyline Components
Somfy IR and
RF RTS Controlled Motors
Somfy IR and
RF Motor Remote Controls
Somfy Shade
Batteries and Power Supplies
|