---

Shipping Policy

Request Info / Quote

Somfy Sonesse ST30 24VDC RTS RF Technology Roller Shade Motor

Larger Somfy Sonesse ST30 RTS RF Controlled Roller Shade Motor Image           The NEW Somfy Sonesse ST30 Shade Motor is an ultra-quiet 24VDC RTS Radio Frequency motor designed for specific use with roller shades.  The Sonesse ST30 motors are engineered with superior noise reduction technology and from a distance of 3 feet, are barely heard. The compact, low profile Sonesse 30 motor is designed for tubes as small as 1.5” in diameter and is the perfect motor for use where more advanced control is needed of the shades. Choose this motor where larger shades need to be lifted and where operation must be at their quietest levels. This shade motor is powered via 24VDC from a wall plug-in transformer or hard wired power supply.      Special Features - The ultra-quiet Somfy Sonesse ST30 motor is std configured for use with 1.5” Rollease Tubes and can be adapted up to 2" Rollease Tubes. The Sonesse 30 Motor is Radio Frequency based so you don't have to point the remote at it every time you want to control it. In fact you can control the shades in your living room from your bedroom completely wirelessly. The Somfy ST30 RTS motor stores the limits set by the remote controls and memory is not lost when power is disconnected. With the momentary press of a button you can command the shade to go to the Full up, Full Down and a customer specified preferred Position. No need to hold the button down and wait for the shade to reach the desired position. Each motor can be controlled by more than one remote control. The Somfy LT30 RTS is controlled via Somfy's advanced RF technology which offers the user simple individual or group control as well as a host of automation options like Timers, Sun Sensor, RS232 Control etc. The Sonesse 30 series shade motors also have adjustable rotation speed so you can closely match the speeds of other shades in the same room.      Can this motor be retrofitted to existing shades? Yes, this motor can be easily retrofitted to existing shades IF you have a clutch/chain driven roller shade on a 1.25"/1.5” aluminum rollease tube. The motors can be configured for use with either the Rollease RB360 Brackets or Rollease Skyline Shade Brackets. Please compare your Brackets to the Rollease Brackets Here and your tube to the Rollease 1.25" Tubes Here and 1.5" Tubes Here. Note: If you are using the skyline brackets you will need the SLAMST30 which is a ST30 to Skyline Adapter plate.   Somfy Sonesse ST30 RTS 24V Roller Shade Motor Specifications     •    Operating Voltage: 24VDC     •    Normal Current Draw: 0.75A     •    Torque: 2.0Nm     •    Lift Capacity - Not Including Tube Weight          -    1.5" Tube: 17.6lb          -     2" Tube: 13.2lb          -     2.5" Tube: 11lb     •    Motor Speed: 28 RPM     •    Ultra-Quiet Operation : 44dBa     •    Standard RTS RF Control     •    Compatible with Somfy RTS RF Control Technology     •    Preconfigured for 1.5" Rollease Tubes     •    Requirements for use - Not Included         -    Power Supply         -    RTS RF Remote         -    1.5” Aluminum Rollease Tube         -    Rollease Shade Brackets     •    Warranty 5 years     •    Includes:         -    ST30 Motor w/1.5" Rollease Crown / Drive         -    Detachable Power Cord     •    Dimensions         -    Overall: 16.125” L x 1.75” Dia - Insertion Dia: 1.135"         -    Tube insertion length: 15.625”     •    Weight: App. 1.43lb     •    Somfy Part # 1001524 Somfy Sonesse ST30 24VDC RTS Shade Motor Programming Instructions - PDF Document Somfy Sonesse ST30 RTS Motor Head w/ Connections - JPG     Optional Items     -    Power Supply             -    24VDC 0.75Amp White Power Supply w/ 10' Lead             -    GO HERE for More Power Supply Details and Options     -    RTS Radio Frequency Remote Controls             -    Telis 1 RTS Remote Control - 1 Channel Remote Control                      -    Can control numerous shade motors but they will operate simultaneously.             -    Telis 4 RTS Remote Control - 5 Channel Remote Control                      -    Provides ability to separate motors onto 5 unique channels of control.                      -    You may group shade motors onto the same channel for simultaneous control.             -    GO HERE for More Remote Control Details and Options     -    Roller Shade Brackets             -    RB360 Brackets Set (Pair)             -    SLB660 Skyline Brackets Set (Pair) - Includes SLAMST30 Skyline ST30 Adapter             -    GO HERE for More Bracket Details and Options     -    Rollease Roller Shade Tubes             -    Rollease 1.5" Tube - 2 to 8 Foot +/- 0.25"     -    End Plugs for the Shade Tube - Opposing Motor End of the Tube             -    REP53 End Plug for 1.5" Rollease Tubes and RB360 Brackets             -    REP03 End Plug for 1.25" Rollease Tubes and RB360 Brackets             -    Skyline SLPE53 End Plug for 1.5" Rollease Tubes and Skyline Brackets             -    Heavy Duty Skyline SLPE53 End Plug for 1.5" Rollease Tubes and Skyline Brackets             -    GO HERE for More End Plug Details and Options Shade Installation Instructions - PDF How to Fabricate a Roller Shade - PDF - Making the Necessary Deductions FAQ and Roller Shade Related Downloads Main Roller Shade Components Index - LOTS of Shade Component Options ST30-RTS-RH

Power Supply No Thanks 24VD 0.75A Power Supply + $12.99 Remote Control No Thanks Telis 1 + $55.00 Telis 4 + $69.00 Brackets No Thanks Pair of RB360 + $2.50 Skyline Brackets + $3.50 Rolllease Tubes No Thanks 1.5" x 2 Foot + $6.00 1.5" x 3 Foot + $8.50 1.5" x 4 Foot + $11.00 1.5" x 5 Foot + $13.50 1.5" x 6 Foot + $16.00 1.5" x 7 Foot + $18.50 1.5" x 8 Foot + $21.00 End Plug No Thanks REP53 1.5" End Plug + $3.50 1.5" Skyline End Plug + $3.25 1.5" HD Skyline End Plug + $4.00

 

---

Shipping Policy

Request Info / Quote

Somfy Telis 1 Pure RTS Technology RF Remote 1 Channel

The Somfy Telis 1 Pure RTS RF Remote Control communicates with all Somfy RTS RF controllable devices. It is a single channel RF remote that can control an unlimited number of shades. All shades assigned to the Telis 1 Remote will operate simultaneously. The Telis remote can control an unlimited amount of motors or RTS interfaces.  When used with the LT30 motors it controls Up, Down, Stop and customer preferred location commands.  RTS technology RF Control devices have a 65’ range through 2 concrete walls and nearly a 100’ clear path range.   Somfy Telis 1 Pure RTS RF Remote Specifications: ·          Communicates with all Somfy RTS RF Technology Devices ·          Single Channel RF Remote ·          Controls unlimited number of motors simultaneously ·          65 Foot Range ·          Dimensions: 4.75” L x 1.75” W x 0.75” H ·          Includes: Wall Button and mounting hardware ·          Optional: Table Top Holder ·          Somfy Part # 1810632    View the Telis Remote Set-Up Instructions Telis1 Pure

Table Top Holder No Thanks Yes + $20.00 Larger Telis 1 Image

 

---

Shipping Policy

Request Info / Quote

Somfy Telis 4 Pure RTS Technology RF Remote 5 Channel

The Somfy Telis 4 RTS remote control communicates with all Somfy RTS RF controllable devices. The Telis 4 is a 5 channel RF remote that can control an unlimited number of shades. Shades or motors can be assigned to one or more channels on the remote. Each channel is individually selectable and you set the channels up the way you want. Each channel can be configured to control one or a group of shades. This is the remote to use if you want to isolate group control. You can have the kitchen on one channel, the living room on another or isolate based on location (east, west etc.) You can control each group separately or create an ALL shade channel to control every shade in the house.  All shades or motors assigned to a specific channel will operate simultaneously. The Telis 4 controls Up, Down, Stop and customer preferred position commands..   Somfy Telis 4 RTS RF Remote Specifications: ·          Communicates with all Somfy RTS RF Technology Devices ·          Easily selectable 5 Channel RF Remote ·          Controls unlimited number of motors simultaneously ·          65 Foot Range ·          Dimensions: 4.75” L x 1.75” W x 0.75” H ·          Includes: Wall Button and mounting hardware ·          Optional: Table Top Holder ·          Somfy Part # 1810633    View the Telis Remote Set-Up Instructions Telis 4 Pure

Table Top Holder No Thanks Yes + $20.00 Larger Telis 4 Image

 

---

Shipping Policy

Request Info / Quote

Somfy DecoFlex 1 RTS Wireless Wall Switch - 1 Channel

The Somfy DecoFlex 1 RTS RF wall switch was designed with flexibility and appearance in mind. Each DecoFlex wireless wall switch is supplied with adhesive backed labels so each channel button can be named by you. The DecoFlex series of wireless RTS wall switches are also available in White Black or Ivory and we also have optional professional preprinted buttons for the ultimate in appearance.     The DecoFlex RTS wall switch communicates with all Somfy RTS RF controllable devices. The DecoFlex 1 is a single channel RTS RF remote that can control an unlimited number of Somfy RTS motors. All shades or motors assigned to a single channel will operate simultaneously. The DecoFlex controls Up, Down, Stop and customer preferred position commands.   Somfy DecoFlex 1  RTS Wireless Wall Switch Specifications:     •    Communicates with all Somfy RTS RF Technology Devices and Motors     •    Colors: White, Ivory and Black (Black costs more - see options)     •    RTS Wireless Wall Switch     •    Single Channel RTS Remote Control     •    Controls unlimited number of motors simultaneously     •    65 Foot RTS RF Control Range     •    Powered by Internal Replaceable Lithium Coin Cell Battery - Supplied     •    Button labels provided w/ White & Gray Text on clear backing so you can name your buttons     •    Up / Down or Open / Closed and Stop Buttons Plus 1 Channel Button     •    Includes: Mounting Bracket, Decora Trim Plate and Adhesive Backed Labels     •    Dimensions: 4.75” L x 1.75” W x 0.75” H     •    Optional:  Professional Pre-Printed Channel Buttons White, Ivory or Black     •    Optional:  Professional Pre-Printed Command Buttons White, Ivory or Black     •    Optional:  Decoflex Table Top Holder  Silver or Black     •    Somfy Part # 1810897 White, 1810898 Ivory and 1810899 Black View the DecoFlex Product Brochure View the DecoFlex RTS Wall Switch Instructions DecoFlex 1

Select Color White Ivory Black + $20.00 Printed Channel Button No Thanks ALL + $3.00 AWNING + $3.00 BALCONY + $3.00 BATHROOM + $3.00 BEDROOM + $3.00 BLACKOUT + $3.00 BLIND + $3.00 BLINDS + $3.00 BLIND 1 + $3.00 BLIND 2 + $3.00 BLIND 3 + $3.00 BLIND 4 + $3.00 CONF. RM + $3.00 DECK + $3.00 DEN + $3.00 DINING RM + $3.00 DRAPERY + $3.00 FOYER + $3.00 GREAT RM + $3.00 GUEST RM + $3.00 HEATER + $3.00 KITCHEN + $3.00 LANAI + $3.00 LIGHTS + $3.00 LIVING RM + $3.00 LOBBY + $3.00 MASTER + $3.00 MORNING + $3.00 NIGHT + $3.00 NURSERY + $3.00 OFFICE + $3.00 PATIO + $3.00 ROMAN + $3.00 SCREEN 1 + $3.00 SCREEN 2 + $3.00 SCREEN 3 + $3.00 SCREEN 4 + $3.00 SHADE + $3.00 SHADES + $3.00 SHADE 1 + $3.00 SHADE 2 + $3.00 SHADE 3 + $3.00 SHADE 4 + $3.00 SHEER + $3.00 SHUTTER + $3.00 SHUTTERS + $3.00 SHUTTER 1 + $3.00 SHUTTER 2 + $3.00 SHUTTER 3 + $3.00 SHUTTER 4 + $3.00 SKYLIGHT + $3.00 STUDY + $3.00 SUN ROOM + $3.00 THEATER + $3.00 WOVEN + $3.00 Printed Command Button No Thanks CLOSE + $4.25 OPEN + $4.25 CLOSE AND OPEN + $8.50 Table Top Holder No Thanks Silver Table Top Holder + $26.00 Black Table Top holder + $26.00 Larger DecoFlex 1 Image

 

---

Shipping Policy

Request Info / Quote

Somfy DecoFlex 5 Convertible RTS Wireless Wall Switch - 5 Channel

The Somfy DecoFlex 5 RTS RF wall switch was designed with flexibility and appearance in mind. The DecoFlex 5 can be converted to 2, 3 or 4 channels with the addition of optional faceplates and each DecoFlex wireless wall switch is supplied with adhesive backed labels so each channel button can be named by you. The DecoFlex series of wireless RTS wall switches are also available in White Black or Ivory and we also have optional professional preprinted buttons for the ultimate in appearance.     The DecoFlex RTS wall switch communicates with all Somfy RTS RF controllable devices. The DecoFlex 5 is a 5 channel RTS RF remote that can control an unlimited number of Somfy RTS Motors. Shades or motors can be assigned to one or more channels on the remote. Each channel is individually selectable and you set the channels up the way you want. Each channel can be configured to control one or a group of shades. This is the remote to use if you want to isolate group control. You can have the kitchen on one channel, the living room on another or isolate based on location (east, west etc.) You can control each group separately or create an ALL shade channel to control every shade in the house.  All shades or motors assigned to a specific channel will operate simultaneously. The DecoFlex controls Up, Down, Stop and customer preferred position commands.   Somfy DecoFlex 5  RTS Wireless Wall Switch Specifications:     •    Communicates with all Somfy RTS RF Technology Devices and Motors     •    Colors: White, Ivory and Black (Black costs more - see options)     •    RTS Wireless Wall Switch     •    5 Channels of Assignable RTS Remote Control     •    Use the Channels as individual shade control or group shades together - You decide     •    Controls unlimited number of motors simultaneously     •    65 Foot RTS RF Control Range     •    Powered by Internal Replaceable Lithium Coin Cell Battery - Supplied     •    Button labels provided w/ White & Gray Text on clear backing so you can name your buttons     •    Removable Buttons to convert to 2, 3, or 4 Channel DecoFlex Wall Switch     •    Up / Down or Open / Closed and Stop Buttons Plus 5 Separate Channel Buttons     •    Includes: Mounting Bracket, Decora Trim Plate and Adhesive Backed Labels     •    Dimensions: 4.75” L x 1.75” W x 0.75” H     •    Optional: 2, 3 and 4 Channel Face Plates White, Ivory or Black     •    Optional:  Professional Pre-Printed Channel Buttons White, Ivory or Black     •    Optional:  Professional Pre-Printed Command Buttons White, Ivory or Black     •    Optional:  Decoflex Table Top Holder  Silver or Black     •    Somfy Part # 1810813 White, 1810814 Ivory and 1810830 Black View the DecoFlex Product Brochure View the DecoFlex RTS Wall Switch Instructions DecoFlex 5

Select Color White Ivory Black + $20.00 Add FacePlates No Thanks 2 Channel + $10.00 3 Channel + $10.00 4 Channel + $10.00 Printed Channel Button 1 No Thanks ALL + $3.00 AWNING + $3.00 BALCONY + $3.00 BATHROOM + $3.00 BEDROOM + $3.00 BLACKOUT + $3.00 BLIND + $3.00 BLINDS + $3.00 BLIND 1 + $3.00 BLIND 2 + $3.00 BLIND 3 + $3.00 BLIND 4 + $3.00 CONF. RM + $3.00 DECK + $3.00 DEN + $3.00 DINING RM + $3.00 DRAPERY + $3.00 FOYER + $3.00 GREAT RM + $3.00 GUEST RM + $3.00 HEATER + $3.00 KITCHEN + $3.00 LANAI + $3.00 LIGHTS + $3.00 LIVING RM + $3.00 LOBBY + $3.00 MASTER + $3.00 MORNING + $3.00 NIGHT + $3.00 NURSERY + $3.00 OFFICE + $3.00 PATIO + $3.00 ROMAN + $3.00 SCREEN 1 + $3.00 SCREEN 2 + $3.00 SCREEN 3 + $3.00 SCREEN 4 + $3.00 SHADE + $3.00 SHADES + $3.00 SHADE 1 + $3.00 SHADE 2 + $3.00 SHADE 3 + $3.00 SHADE 4 + $3.00 SHEER + $3.00 SHUTTER + $3.00 SHUTTERS + $3.00 SHUTTER 1 + $3.00 SHUTTER 2 + $3.00 SHUTTER 3 + $3.00 SHUTTER 4 + $3.00 SKYLIGHT + $3.00 STUDY + $3.00 SUN ROOM + $3.00 THEATER + $3.00 WOVEN + $3.00 Printed Channel Button 2 No Thanks ALL + $3.00 AWNING + $3.00 BALCONY + $3.00 BATHROOM + $3.00 BEDROOM + $3.00 BLACKOUT + $3.00 BLIND + $3.00 BLINDS + $3.00 BLIND 1 + $3.00 BLIND 2 + $3.00 BLIND 3 + $3.00 BLIND 4 + $3.00 CONF. RM + $3.00 DECK + $3.00 DEN + $3.00 DINING RM + $3.00 DRAPERY + $3.00 FOYER + $3.00 GREAT RM + $3.00 HEATER + $3.00 KITCHEN + $3.00 LANAI + $3.00 LIGHTS + $3.00 LIVING RM + $3.00 LOBBY + $3.00 MASTER + $3.00 MORNING + $3.00 NIGHT + $3.00 NURSERY + $3.00 OFFICE + $3.00 PATIO + $3.00 ROMAN + $3.00 SCREEN + $3.00 SCREEN 1 + $3.00 SCREEN 2 + $3.00 SCREEN 3 + $3.00 SCREEN 4 + $3.00 SHADE + $3.00 SHADES + $3.00 SHADE 1 + $3.00 SHADE 2 + $3.00 SHADE 3 + $3.00 SHADE 4 + $3.00 SHUTTER + $3.00 SHUTTERS + $3.00 SHUTTER 1 + $3.00 SHUTTER 2 + $3.00 SHUTTER 3 + $3.00 SHUTTER 4 + $3.00 SKYLIGHT + $3.00 STUDY + $3.00 SUN ROOM + $3.00 THEATER + $3.00 WOVEN + $3.00 Printed Channel Button 3 No Thanks ALL + $3.00 AWNING + $3.00 BALCONY + $3.00 BATHROOM + $3.00 BEDROOM + $3.00 BLACKOUT + $3.00 BLIND + $3.00 BLINDS + $3.00 BLIND 1 + $3.00 BLIND 2 + $3.00 BLIND 3 + $3.00 BLIND 4 + $3.00 CONF. RM + $3.00 DECK + $3.00 DEN + $3.00 DINING RM + $3.00 DRAPERY + $3.00 FOYER + $3.00 GREAT RM + $3.00 GUEST RM + $3.00 HEATER + $3.00 KITCHEN + $3.00 LANAI + $3.00 LIGHTS + $3.00 LIVING RM + $3.00 LOBBY + $3.00 MASTER + $3.00 MORNING + $3.00 NIGHT + $3.00 NURSERY + $3.00 OFFICE + $3.00 PATIO + $3.00 ROMAN + $3.00 SCREEN + $3.00 SCREEN 1 + $3.00 SCREEN 2 + $3.00 SCREEN 3 + $3.00 SCREEN 4 + $3.00 SHADE + $3.00 SHADES + $3.00 SHADE 1 + $3.00 SHADE 2 + $3.00 SHADE 3 + $3.00 SHADE 4 + $3.00 SHEER + $3.00 SHUTTER + $3.00 SHUTTERS + $3.00 SHUTTER 1 + $3.00 SHUTTER 2 + $3.00 SHUTTER 3 + $3.00 SHUTTER 4 + $3.00 SKYLIGHT + $3.00 STUDY + $3.00 SUN ROOM + $3.00 THEATER + $3.00 WOVEN + $3.00 Printed Channel Button 4 No Thanks ALL + $3.00 AWNING + $3.00 BALCONY + $3.00 BATHROOM + $3.00 BLACKOUT + $3.00 BLIND + $3.00 BLINDS + $3.00 BLIND 1 + $3.00 BLIND 2 + $3.00 BLIND 3 + $3.00 BLIND 4 + $3.00 CONF. RM + $3.00 DECK + $3.00 DEN + $3.00 DINING RM + $3.00 DRAPERY + $3.00 FOYER + $3.00 GREAT RM + $3.00 GUEST RM + $3.00 HEATER + $3.00 KITCHEN + $3.00 LANAI + $3.00 LIGHTS + $3.00 LIVING RM + $3.00 LOBBY + $3.00 MASTER + $3.00 MORNING + $3.00 NIGHT + $3.00 NURSERY + $3.00 OFFICE + $3.00 PATIO + $3.00 ROMAN + $3.00 SCREEN + $3.00 SCREEN 1 + $3.00 SCREEN 2 + $3.00 SCREEN 3 + $3.00 SCREEN 4 + $3.00 SHADE + $3.00 SHADES + $3.00 SHADE 1 + $3.00 SHADE 2 + $3.00 SHADE 3 + $3.00 SHADE 4 + $3.00 SHEER + $3.00 SHUTTER + $3.00 SHUTTERS + $3.00 SHUTTER 1 + $3.00 SHUTTER 2 + $3.00 SHUTTER 3 + $3.00 SHUTTER 4 + $3.00 SKYLIGHT + $3.00 STUDY + $3.00 SUN ROOM + $3.00 THEATER + $3.00 WOVEN + $3.00 Printed Channel Button 5 No Thanks ALL + $3.00 AWNING + $3.00 BALCONY + $3.00 BATHROOM + $3.00 BEDROOM + $3.00 BLACKOUT + $3.00 BLIND + $3.00 BLINDS + $3.00 BLIND 1 + $3.00 BLIND 2 + $3.00 BLIND 3 + $3.00 BLIND 4 + $3.00 CONF. RM + $3.00 DECK + $3.00 DEN + $3.00 DINING RM + $3.00 DRAPERY + $3.00 FOYER + $3.00 GREAT RM + $3.00 GUEST RM + $3.00 HEATER + $3.00 KITCHEN + $3.00 LANAI + $3.00 LIGHTS + $3.00 LIVING RM + $3.00 LOBBY + $3.00 MASTER + $3.00 MORNING + $3.00 NIGHT + $3.00 NURSERY + $3.00 OFFICE + $3.00 PATIO + $3.00 ROMAN + $3.00 SCREEN + $3.00 SCREEN 1 + $3.00 SCREEN 2 + $3.00 SCREEN 3 + $3.00 SCREEN 4 + $3.00 SHADE + $3.00 SHADES + $3.00 SHADE 1 + $3.00 SHADE 2 + $3.00 SHADE 3 + $3.00 SHADE 4 + $3.00 SHEER + $3.00 SHUTTER + $3.00 SHUTTERS + $3.00 SHUTTER 1 + $3.00 SHUTTER 2 + $3.00 SHUTTER 3 + $3.00 SHUTTER 4 + $3.00 SKYLIGHT + $3.00 STUDY + $3.00 SUN ROOM + $3.00 THEATER + $3.00 WOVEN + $3.00 Printed Command Button No Thanks CLOSE + $4.25 OPEN + $4.25 CLOSE AND OPEN + $8.50 Table Top Holder No Thanks Silver Table Top Holder + $26.00 Black Table Top Holder + $26.00 Larger DecoFlex 5 Image

 

---

Shipping Policy

Request Info / Quote

AVO 24VD075W - 24VDC 0.75A White Wall Plug Power Supply

The AVO 24VD075W Wall Plug DC adapter is a regulated switching power supply with 10' of connected 22AWG leads. This white power supply is designed to blend into the environment more easily.  The very compact design, as well as its color, makes it perfectly suitable for office or residential decors. Optional solutions for using this power supply with your existing Somfy 24VDC powered window treatments.     •    Butt Splice Kit :  Includes  - 2 non insulated butt splices that accept 24 to 20 AWG wires and 3" of 1/4" 3:1 white heat shrink to cover the termination when crimped.   AVO 24VD075W 24VDC 0.75A Wall Plug Power Adapter Specifications: ·          24VDC 750ma Regulated Switch Mode Wall Plug Adapter ·          Color: White ·          Output Voltage 24 Volts DC +/- 5% at 0 to 0.75Amp output ·          Max Output Current 0.75A (750ma) ·          Input Voltage: 100-240VAC 50/60Hz at 0.35Amp Full Load ·          10' Tinned Copper 22 AWG Leads ·          UL Listed Class II Power Supply ·          Compact Size - Perfect for Portability or Aesthetics ·          2 Prong Non-Polarized Plug ·          2 Power Supplies can be plugged into 1 Duplex Outlet ·          Built-In Short Circuit Protect w/ Auto Recovery ·          Built-In Over Load Protect w/ Auto Recovery ·          Dimensions: 1.75” W x 2.35" H x 1.38” D (not Including Outlet Prongs) ·          Weight: 0.25lb (4oz) With 10' Lead ·          Warranty: 2 Year - AV Outlet Facilitated ·          Easily Powers 1 - ST30 Motorized Shade ·          Optional: Butt Splice Kit Automatic 10% Discount on Purchases of 5 Automatic 15% Discount on Purchases of 10 or more Instructions to Perform - Butt Splice Termination Back View - 24VD075W White 24V DC Wall Plug Power Supply A typical Somfy ST30 motorized shade  30” W x 65” H on a 1.5” tube uses 350ma of current and a shade 86” W x 73” H on a 1.5” tube typically requires 600ma of current. If you connect multiple shades to one transformer they must be wired in parallel. If you do not understand the difference between series and parallel networks than you should not attempt to wire multiple shades to one power supply. Our stated current draws are for use as estimates ONLY and are not specifications. Somfy states the ST30 Motors consume 750ma (0.75A) per motor. Size your power supplies accordingly. Roller Shade Components Index Page 24VD075W

Splice Kit No Thanks Add Butt Splice Kit + $1.50 Larger 24VDC 750ma DC Adapter

 

---

Shipping Policy

Request Info / Quote

AVO 24VD150W - 24VDC 1.5A White Wall Plug Power Supply

The AVO 24VD150W Wall Plug DC adapter is a regulated switching power supply with 10' of connected 18AWG leads. This white power supply is designed to blend into the environment more easily.  The very compact design, as well as its color, makes it perfectly suitable for office or residential decors. This small power supply has the ability to power 2 Sonesse 30 ST30 Motorized Shades at one time. Optional solutions for using this power supply with your existing Somfy 24VDC powered window treatments.     •    Butt Splice Kit :  Includes  - 2 non insulated butt splices that accept 22 to 18 AWG wires and 3" of 1/4" 3:1 white heat shrink to cover the termination when crimped. Use this kit to connect the power supply leads to the motor leads neatly. Only 1 Kit need for connecting 1 or 2 Motors.   AVO 24VD150W 24VDC 1.5A Wall Plug Power Adapter Specifications: ·          24VDC 1.5A Regulated Switch Mode Wall Plug Adapter ·          Color: White ·          Output Voltage 24 Volts DC +/- 5% at 0 to 1.5Amp output ·          Max Output Current 1.5A (1500ma) ·          Input Voltage: 100-240VAC 50/60Hz at 1.2Amp Full Load ·          10' Tinned Copper 18 AWG Leads ·          UL Listed Class II Power Supply ·          Compact Size - Perfect for Portability or Aesthetics ·          2 Prong Non-Polarized Plug ·          Built-In Short Circuit Protect w/ Auto Recovery ·          Built-In Over Load Protect w/ Auto Recovery ·          Dimensions: 1.77” W x 3.82" H x 1.48” D (not Including Outlet Prongs) ·          Weight: 0.55lb (8.8oz) With 10' Lead ·          Warranty: 2 Year - AV Outlet Facilitated ·          Easily Powers 2 - ST30 Motorized Shade ·          Optional: Butt Splice Kit Automatic 10% Discount on Purchases of 5 Automatic 15% Discount on Purchases of 10 or more Instructions to Perform - Butt Splice Termination Back View - 24VD150W White 24V DC Wall Plug Power Supply A typical Somfy ST30 motorized shade  30” W x 65” H on a 1.5” tube uses 350ma of current and a shade 86” W x 73” H on a 1.5” tube typically requires 600ma of current. If you connect multiple shades to one transformer they must be wired in parallel. If you do not understand the difference between series and parallel networks than you should not attempt to wire multiple shades to one power supply. Our stated current draws are for use as estimates ONLY and are not specifications. Somfy states the ST30 Motors consume 750ma (0.75A) per motor. Size your power supplies accordingly. Roller Shade Components Index Page 24VD150W

Splice Kit No Thanks Add Butt Splice Kit + $1.50 Larger 24VDC 1.5A DC Adapter

 

---

Shipping Policy

Request Info / Quote

Rollease REP53 End Plug for 1.50" Tubes

Rollease REP53 1.5" End Plug Specifications: ·          Industry Standard end Plug for 1.5” Rollease Tubes ·          Color: Vanilla or Black ·          Uses Rollease Brackets RB360 / RB560 ·          Use on opposite end of tube from Clutch or Motor ·          Allows for free rotation of roller shades ·          Overall Length: 1.95” ·          Overall Diameter: 1.455” ·          Insertion Length: App. 1.4" ·          Insertion Diamter: 1.43"   How to Fabricate a Roller Shade - Making the Necessary Deductions Index Page for  Rollease, Somfy and Roller Shade Related Downloads Our Main Roller Shade Components Index REP53

Color Vanilla Black Larger REP53 End Plug

 

---

Shipping Policy

Request Info / Quote

Rollease SLPE53 Skyline End Plug for 1.5" Tubes

The Rollease Skyline SLPE53 spring loaded pin-end plug allows for easier installtion of shades into brackets. The spring loaded pin maintains a constant tension on the shade assembly within the bracket preventing the shade from rolling out of the brackets and reducing drag on the drive system.           Skyline System is an entire line of coordinated, premium commercial/residential roller shade products from Rollease. Sleek, curved design and Nylon construction clutch afford cleaner appearance, quieter performance, added strength and durability. The Skyline Collection includes a hooked clutch, a universal bracketing system with covers, 2-on-1 shared bracket option, spring loaded pin end and notchless curved and square fascia system.   Rollease Skyline Collection SLPE53 - 1.5" Pin End Plug Specifications:     •    Used with Rollease Skyline Series Components     •    Spring Loaded Pin-End Plug for 1.5” Rollease Tubes     •    Color:  White     •    Uses Rollease Skyline Brackets - SLB660, SLB680     •    Uses Rollease Skyline Intermediate Brackets - SLB660-I, SLB680-I     •    Uses Rollease Skyline Double Brackets - SLB660DBV, SLB660DBH     •    Use on opposite end of tube from Skyline Clutch or Somfy Motor     •    The Pin-End type Plug allows for smoother rotation of roller shades     •    Overall Length: 1.43” - Spring Loaded Pin Not Compressed     •    Overall Diameter: 1.518”     •    Insertion Length: App. 1" Pin Not Compressed     •    Insertion Diameter: 1.425" Rollease Skyline Series Shade Parts List   How to Fabricate a SKYLINE ROLLEASE Roller Shade - Making the Necessary Deductions Index Page for  Rollease, Somfy and Roller Shade Related Downloads Our Main Roller Shade Components Index SLPE53

Larger SLPE53 Pin End Plug

 

---

Shipping Policy

Request Info / Quote

Rollease SLPEHD53 Heavy Duty Skyline End Plug for 1.5" Tubes

The Rollease Skyline SLPEHD53 spring loaded pin-end plug allows for easier installtion of shades into brackets. The spring loaded pin maintains a constant tension on the shade assembly within the bracket preventing the shade from rolling out of the brackets and reducing drag on the drive system. The heavier duty pin end plug provides increased spring tension for holding larger shade in position more securely and the longer pin end insertion into the tube ensures better long term alignment of the components.           Skyline System is an entire line of coordinated, premium commercial/residential roller shade products from Rollease. Sleek, curved design and Nylon construction clutch provide a cleaner appearance, quieter performance, added strength and durability.   Rollease Skyline Collection SLPE53 - 1.5" Pin End Plug Specifications:     •    Color:  White     •    Used with Rollease Skyline Series Components     •    Spring Loaded Pin-End Plug for 1.5” Rollease Tubes     •    Heavy Duty Spring for Heavier Shade Assemblies     •    Longer Tube Insertion for Better Component Alingment     •    Uses Rollease Skyline Brackets - SLB660, SLB680     •    Uses Rollease Skyline Intermediate Brackets - SLB660-I, SLB680-I     •    Uses Rollease Skyline Double Brackets - SLB660DBV, SLB660DBH     •    Use on opposite end of tube from Skyline Clutch or Somfy Motor     •    The Pin-End type Plug allows for smoother rotation of roller shades     •    Overall Length: 3.2" - Spring Loaded Pin not Compressed     •    Overall Diameter: 1.518”     •    Insertion Length: App. 2.5"     •    Insertion Diameter: 1.425" Rollease Skyline Series Shade Parts List   How to Fabricate a SKYLINE ROLLEASE Roller Shade - Making the Necessary Deductions Index Page for  Rollease, Somfy and Roller Shade Related Downloads Our Main Roller Shade Components Index SLPEHD53

Larger Skyline End Plug

 

---

Shipping Policy

Request Info / Quote

Rollease RB360 Shade Brackets - R3/R8 Clutch or Somfy LT30/ST30 Motors

The Rollease RB360 brackets are designed for use with R3 and R8 Rollease clutches as well as Somfy LT30 and ST30 shade motors. The set includes the end plug bracket which has a V-notch for the REP03/REP53 end plug to sit on and a locking mechanism to keep it in place. The motor or drive side bracket has the tab. When mounting the shade you slide the drive side onto the tab and then place the end plug side into the notch and lock in place.   Rollease RB360 Bracket Specifications: ·          Designed for Rollease R3, R8 Clutches and Somfy LT30, ST30 Motors ·          Color: Zinc Coated or White ·          Screw holes for ceiling or wall mounting ·          1.5" Projection ·          Places center of tube 1.5” off of mounting surface ·          1.5” Wide Foot print ·          Tab Width for Drive side – 0.4” ·          Tab Length for drive side – 0.4” ·          Optional  RB360 Bracket Covers for Outside Mount Applications Automatic Quantity Discounts (Add Qty. to Cart for discount) Buy 3 to 10 RB360 Sets - Receive a 15% Discount Buy 10 or RB360 Sets - Receive a 25% Discount Quantity Discounts not available if product is on "Sale"   How to Fabricate a Roller Shade - Making the Necessary Deductions Index Page for  Rollease, Somfy and Roller Shade Related Downloads Our Main Roller Shade Components Index RB360

Color Zinc White + $0.30 Optional Covers No Thanks Add Bracket Covers + $0.99 Larger RB360 Bracket

 

---

Shipping Policy

Request Info / Quote

Rollease Skyline SLB660 Shade Brackets

The SLB660 is a roller shade bracket from the Skyline collection of Rollease. This single bracket is used for both the Pin End (SLPE53) and Motor or clutch end. Since both brackets are the same, you can mount the brackets and then decide what side to put the shade drive mechanism on and if you change your mind on the drive side you don't have to switch the brackets around.       Somfy LT30 and Sonesse ST Motor to Sklyine adapters are available that enable this bracket to be used with Somfy motors. This bracket is also compatible with all Skyline clutches.   Rollease Skyline SLB660 Bracket Specifications: ·          Designed for Rollease Skyline Components ·          Color: White ·          Campatible with Somfy LT30 Motors w/ Adapter # SLAMLT30 ·          Campatible with Somfy Sonesse ST30 Motors w/ Adapter # SLAMST30 ·          Each Bracket can be used for Pin-end or Drive End ·          Mounting Holes for ceiling, back wall or side wall mounting ·          1 5/8" Projection to Center of Shade Tube ·          2 1/8"” Wide Foot print  ·          Overall Dimensions: 2 1/8" W x 2 7/16" H ·          Optional  SLB660 Bracket Covers for Outside Mount Applications ·          SOLD PER EACH - NOT A PAIR Rollease Skyline Series Shade Parts List   Automatic Quantity Discounts (Add Qty. to Cart for discount) Buy 10 to 20 Skyline Brackets - Receive a 15% Discount Buy 20 or More Skyline Brackets - Receive a 25% Discount Quantity Discounts not available if product is on "Sale"   How to Fabricate a SKYLINE ROLLEASE Roller Shade - Making the Necessary Deductions Index Page for  Rollease, Somfy and Roller Shade Related Downloads Our Main Roller Shade Components Index SLB660

Bracket Cover No Thanks Add Cover + $0.79 Larger SLB660 Bracket

 

---

Shipping Policy

Request Info / Quote

Rollease SLAMST30 Skyline to Somfy ST30 Bracket Adapter

Skyline System is an entire line of coordinated, premium commercial/residential roller shade products from Rollease. Sleek, curved design and Nylon construction clutch afford cleaner appearance, quieter performance, added strength and durability. Velvetrol® control ensures smoother operation particularly on larger shades, providing a 20% lower input torque. The Skyline Collection includes a hooked clutch, a universal bracketing system with covers, 2-on-1 shared bracket option, spring loaded pin end and notchless curved and square fascia system. Hookless version available for use with R-Series brackets. Rollease Skyline Collection SLAMST30 - Somfy ST30 to Skyline Adapter Specifications:     •    Used with Rollease Skyline Series Components     •    Adapts ST30 Motor Head to work with Skyline Brackets     •    Color:  White     •    Uses Rollease Skyline Brackets - SLB660, SLB680     •    Uses Rollease Skyline Intermediate Brackets - SLB660-I, SLB680-I     •    Uses Rollease Skyline Double Brackets - SLB660DBV, SLB660DBH Rollease Skyline Series Shade Parts List   How to Fabricate a SKYLINE ROLLEASE Roller Shade - Making the Necessary Deductions Index Page for  Rollease, Somfy and Roller Shade Related Downloads Our Main Roller Shade Components Index SLAMST30

Larger Skyline ST30 Adapter

 

---

Shipping Policy

Request Info / Quote

Roller Shade Double Sided Tape 36 yd Roll

WDouble Sided Roller Shade Tape supplied by Rollease for securing shade material to Rollease tubes. Even though the rollease tubes come with tape we recommend using 2 strips. Using 2 strips holds heavy materials better and helps to protect against tape failure due to  inadvertant excessive pulling on shade past its stop limits.   Double Sided Roller Shade Tape: ·          Double Sided Tape ·          Width: 1.525” ·          Thickness: 0.425” ·          Length: 36 yd Roll   ShadeTape

Larger Roller Shade Tape

 

---