The VI-43 rubber vibration isolators are designed to support couches, chairs, platforms etc. for the purpose of maximizing the vibration effect produced by the Buttkicker Transducers. The VI-43 vibration isolators will allow the chair, couch platform to vibrate more freely and reduce the the amount of vibration energy transferred to the floor. These vibration isolators are particularly nice because the metal plate is at the top surface which allows the isolator to be attached without compressing the rubber. Additional the VI-43 isolator is a little taller which will lift the chair out of thick plush carpet. The VI-43 rubber isolators are supplied with a threaded stud and locking nut.
The goal of using an isolator like this is to get the base of the chair off the floor and to provide a new foot that has the ability to let the chair float more easily. The RI-K28 isolators do a good job of this on the thinner more commercial style carpets but if you have a thicker more plush carpet the VI-43 isolator will provide better results.
VI-43 Rubber Vibration Isolator Specifications:
· Rubber Isolator designed for individual seating, chairs and sofas
· Metal plate and Threaded Stud at top surface
- Advantage: The rubber won't compress when attaching to chair
- Advantage: More Rubber - More Action
· Neoprene Rubber can be used indoors or Outdoors
· Durometer Hardness 50A (Medium Hard by Classification not by feel)
· Load Capacity Per Each - 80lb (As Specified by MFG)
· 5/16-18 Threaded Stud with Locking Nut
· Threaded Stud Length - 0.600"
· Height: 1” Not Including Stud
· Width: 1.6”
· Sold as a QUANTITY OF 1
Automatic Quantity Discounts (Add Qty. to Cart for discount)
Buy 10 to 20 - Receive a 10% Discount
Buy 20 to 30 - Receive a 15% Discount
buy 30 or more - Receive a 20% Discount