Roller Shade Pockets, Black Out Tracks and Channels

Shipping Policy

Request Info / Quote

Aluminum Shade Pockets 3", 4" and 6" Compatible with Blackout Channels

   ft

The Aluminum Pocket System is available in 3", 4" and 6" sizes to accommodate most installations and is designed to be used for inside or outside mount applications. This versatile pocket system can be used for both standard or reverse roll roller shade directions and can also be used in conjunction with our blackout side channel track system for a clean and professional installation. The shade pocket is available with or without the bottom closure piece as well so you only have to buy what you need. The roller shade pocket system is sold by the foot and is available in Anodized Aluminum and White as a standard product offering. We tend to stock more anodized aluminum pocket than white but in any case we can get the product in stock and shipped within two weeks. Custom Cutting of the shade pockets and blackout channels is available at no added cost but we do strongly recommend the product be cut to final finished size on site to ensure proper fit and finish.

Rollease Contact Series Black-Out Roller Shade Pocket System:

    •    Constructed of Solid Aluminum

    •    Available in 3", 4" and 6" Versions

    •    Inside or Outside Mount Applications

    •    For clutch/chain or motorized shade systems

    •    End plates available for outside mount applications

    •    Special Shade Brackets available but not necessary for most applications

    •    Finishes: Clear Anodized Aluminum or Painted White

    •    Reversible Bottom Closure with light blocking brush Sold Separately

    •    Compatible with Blackout Side and Bottom Channels (Except 3" Version)

    •    Available in 16' Lengths

    •    Sold in Full Foot Increments +/- 0.25"

    •    Sold in Full Foot Increments +/- 0.25"

    •    Lengths over 8' REQUIRE Shipping Quote

    •    Please specify length as quantity

We can cut to finished sizes but do recommend onsite cutting as it is more accurate.

3" Anodized Aluminum Pockets are Stocked

Minimum orders are enforced for White or 4" and 6" Pockets - 40 Foot Minimum

Please note the 3" Shade Pocket is not designed for use with the blackout side channels but it works fine with a minor modification. The bottom closure needs to be notched so the side channel fits. Black-Out Channel Installation Guide

Factory Painted finishes: While both the anodized aluminum and the white painted finishes can be scratched we do feel that it is best to opt for the anodized surface due to the potential for scratching while cutting and preparing for fit into the window. A minor scratch on anodized aluminum is far less noticeable than on a painted surface. The pieces could also be painted on site before or after final installation of the pocket system.

Black-Out Channel Installation Guide PDF Written by AV-Outlet

Rollease Black-out Pocket Dimensions and Installation Information PDF

How to Fabricate a Roller Shade - Making the Necessary Deductions

Index Page for Rollease, Somfy and Roller Shade Related Downloads

Our Main Roller Shade Components Index

ShadePocket

Shipping Policy

Request Info / Quote

Aluminum Blackout Side Channels

   ft

The use of the aluminum side channels with our pocket system allows for the near complete blackout of a window. The blackout side channels have been designed to work with the 4" and 6" pocket systems but can be customer modified to work with the 3" Pockets as well. The blackout channels are a 2 piece system comprised of a front and back piece. The back piece can be either mounted through the back of the piece or through the side of the piece by drilling holes and using the appropriate screws for the installation. The front piece simply snaps into the back piece after installation. Both pieces of the blackout side channels include light blocking brush to maximize the effective blackout capabilities of the shade blackout system. The blackout side channels are sold by the foot and are available in Anodized Aluminum and White as a standard product offering. We tend to stock more anodized aluminum pocket than white but in any case we can get the product in stock and shipped within two weeks. Custom Cutting of the shade pockets and blackout channels is available at no added cost but we do strongly recommend the product be cut to final finished size on site to ensure proper fit and finish.

Rollease Contact Series Roller Shade Blackout Side Channels:

    •    Constructed of Solid Aluminum

    •    One Size Available

    •    Fits 4 and 6" Pockets (3" Pocket requires customer modification)

    •    Inside or Outside Mount Applications

    •    For clutch/chain or motorized shade systems

    •    Finishes: Clear Anodized Aluminum or Painted White

    •    Includes Light Blocking Brush for Both Pieces

    •    Blackout Bottom Channel fits into the gap of the side channels

    •    Both Front and Back Pieces Sold as 1 Unit

    •    Available in 16' Lengths

    •    Sold in Full Foot Increments +/- 0.25"

    •    Sold in Full Foot Increments +/- 0.25"

    •    Lengths over 8' REQUIRE Shipping Quote

    •    Please specify length as quantity

We can cut to finished sizes but do recommend onsite cutting as it is more accurate.

Anodized Aluminum is Stocked

Minimum orders are enforced for White - 40 Foot Minimum

Please note the 3" Shade Pocket is not designed for use with the blackout side channels but it works fine with a minor modification. The bottom closure needs to be notched so the side channel fits. Black-Out Channel Installation Guide

Factory Painted finishes: While both the anodized aluminum and the white painted finishes can be scratched we do feel that it is best to opt for the anodized surface due to the potential for scratching while cutting and preparing for fit into the window. A minor scratch on anodized aluminum is far less noticeable than on a painted surface. The pieces could also be painted on site before or after final installation of the pocket system.

Black-Out Channel Installation Guide PDF Written by AV-Outlet

Rollease Black-out Pocket Dimensions and Installation Information PDF

How to Fabricate a Roller Shade - Making the Necessary Deductions

Index Page for Rollease, Somfy and Roller Shade Related Downloads

Our Main Roller Shade Components Index

SideChannel

Shipping Policy

Request Info / Quote

Aluminum Blackout Bottom Channel

   ft

The use of the aluminum bottom channels with our pocket system and side channels allows for the near complete blackout of a window. The blackout bottom channel has been designed to fit nicely into the gap of the side channels. The bottom channel can be adhere to the window sill or be drilled though and screwed into place. The blackout bottom channel is sold by the foot and is available in Anodized Aluminum and White as a standard product offering. We tend to stock more anodized aluminum pocket than white but in any case we can get the product in stock and shipped within two weeks. Custom Cutting of the shade pockets and blackout channels is available at no added cost but we do strongly recommend the product be cut to final finished size on site to ensure proper fit and finish.

Rollease Contact Series Roller Shade Blackout Bottom Channel:

    •    Constructed of Solid Aluminum

    •    One Size Available

    •    Fits into gap of side channels

    •    Inside or Outside Mount Applications

    •    For clutch/chain or motorized shade systems

    •    Finishes: Clear Anodized Aluminum or Painted White

    •    Available in 16' Lengths

    •    Sold in Full Foot Increments +/- 0.25"

    •    Sold in Full Foot Increments +/- 0.25"

    •    Lengths over 8' REQUIRE Shipping Quote

    •    Please specify length as quantity

We can cut to finished sizes but do recommend onsite cutting as it is more accurate.

Anodized Aluminum is Stocked

Minimum orders are enforced for White - 40 Foot Minimum

Factory Painted finishes: While both the anodized aluminum and the white painted finishes can be scratched we do feel that it is best to opt for the anodized surface due to the potential for scratching while cutting and preparing for fit into the window. A minor scratch on anodized aluminum is far less noticeable than on a painted surface. The pieces could also be painted on site before or after final installation of the pocket system.

Black-Out Channel Installation Guide PDF Written by AV-Outlet

Rollease Black-out Pocket Dimensions and Installation Information PDF

How to Fabricate a Roller Shade - Making the Necessary Deductions

Index Page for Rollease, Somfy and Roller Shade Related Downloads

Our Main Roller Shade Components Index

BottomChannel

Shipping Policy

Request Info / Quote

Aluminum Shade Pocket End Plates 3", 4" and 6"



The use of the aluminum pocket end plate is for use with the pocket closure system when used in and outside mount application. The shade pocket end plate is color matched to the pockets and is supplied with matching screws. No drilling is necessary as the pocket closures are designed to accept the screws. The pocket endplates are sold per each and is available in Anodized Aluminum and White as a standard product offering. We tend to stock more anodized aluminum pocket than white but in any case we can get the product in stock and shipped within two weeks.

Rollease Contact Series Roller Shade Pocket Endplate:

    •    Constructed of Solid Aluminum

    •    Sizes for 3", 4" and 6" Pockets

    •    Used in outside mount applications

    •    Finishes: Clear Anodized Aluminum (Stocked) or Painted White (Special Order)

    •    Includes Color Matched Screws

    •    Sold Per Each

PocketEndPlate

Shipping Policy

Request Info / Quote

Rollease RB362-W-RTN 3" Fascia / Pocket Brackets - R3, R8, LT30 or ST30



The Rollease RB362-W-RTN Brackets are designed for use with 3" Fascia Panels and 3" Shade Pockets. The use of Rivets are recommended to hold the bracket in place when used with shade pockets. When used with fascia Panels the brackets simply snap in place. The RB362-W-RTN are for use with R3 and R8 Clutches or Somfy LT30 and ST30 Motors. this bracket can be used for both inside and out side mount applications. The brackets are sold as a set - the side with the tab is for the motor or clutch side and the side with the v groove is for the end plug side. It is not shown in our pictures but we only stock the RTN version. The RTN version has the retaining clip to prevent the end plug side of the tube from being accidentally knocked off the bracket. Since 90% of the time the brackets are not visible we only stock these in White. ABlack, Bronze, Vanilla and Gray colors can be order with a 2 week lead time.

Rollease RB362-W-RTN Fascia and Pocket Brackets:

    •    Constructed of Steel

    •    For 3" Fascia and Pockets

    •    For use with R3, R8 Clutches or Somfy LT30 and ST30 Motors

    •    Finish: Painted White

    •    Safety retaining Clip on End Plug Side

    •    Sold as a Set

RB362-W-RTN

Shipping Policy

Request Info / Quote

Rollease RB561-W-RTN 3" Fascia / Pocket Brackets R16 R24 Clutches



The Rollease RB561-W-RTN Brackets are designed for use with 3" Fascia Panels and 3" Shade Pockets. The use of Rivets are recommended to hold the bracket in place when used with shade pockets. When used with fascia Panels the brackets simply snap in place. The RB561-W-RTN are for use with R16 and R24 Clutches. This bracket can be used for both inside and out side mount applications. The brackets are sold as a set - the side with the tab is for the motor or clutch side and the side with the v groove is for the end plug side. It is not shown in our pictures but we only stock the RTN version. The RTN version has the retaining clip to prevent the end plug side of the tube from being accidentally knocked off the bracket. Since 90% of the time the brackets are not visible we only stock these in White. ABlack, Bronze, Vanilla and Gray colors can be order with a 2 week lead time.

Rollease RB561-W-RTN Fascia and Pocket Brackets:

    •    Constructed of Steel

    •    For 3" Fascia and Pockets

    •    For use with R16, R24 Clutches

    •    Finish: Painted White

    •    Safety retaining Clip on End Plug Side

    •    Sold as a Set

RB561-W-RTN

Shipping Policy

Request Info / Quote

Rollease RB581-W-RTN 4" Fascia / Pocket Brackets R16 R24 Clutches



The Rollease RB581-W-RTN Brackets are designed for use with 4" Fascia Panels and 4" Shade Pockets. The use of Rivets are recommended to hold the bracket in place when used with shade pockets. When used with fascia Panels the brackets simply snap in place. The RB581-W-RTN are for use with R16 and R24 Clutches. This bracket can be used for both inside and out side mount applications. The brackets are sold as a set - the side with the tab is for the motor or clutch side and the side with the v groove is for the end plug side. It is not shown in our pictures but we only stock the RTN version. The RTN version has the retaining clip to prevent the end plug side of the tube from being accidentally knocked off the bracket. Since 90% of the time the brackets are not visible we only stock these in White. ABlack, Bronze, Vanilla and Gray colors can be order with a 2 week lead time.

Rollease RB581-W-RTN Fascia and Pocket Brackets:

    •    Constructed of Steel

    •    For 4" Fascia and Pockets

    •    For use with R16, R24 Clutches

    •    Finish: Painted White

    •    Safety retaining Clip on End Plug Side

    •    Sold as a Set

RB581-W-RTN