---

Shipping Policy

Request Info / Quote

Somfy 12V Reloadable Battery Wand - 9014020

Larger Somfy 9014020 12V Reloadable Battery Wand Image Somfy 9014020 12V Reloadable Battery Wand Specifications     •    Single Reloadable Battery Wand - Batteries NOT Included     •    Designed for use with Somfy Motors     •    Not Disposable - End Caps Screw Off for Loading     •    Aluminum Tube and End Caps     •    Output Voltage 12 Volts DC     •    Lead Length: 14” App.     •    Tube Dimensions: 17” L x 0.792" Diameter     •    Weight: App. 4oz (0.25 lb)     •    Optional Mounting Clips - NOT Included     •    Optional Set of 8 Energizer Lithium AA Batteries - NOT Included     •    Somfy Part # 9014020     •    DIRECT REPLACEMENT for Somfy Part # 9013388, 9013741, 9013260, 2330051     •    DIRECT REPLACEMENT for Somfy Part # HACC-9295, 233007, 9013229, and more     View the 12V Battery Wand Connector   The use of Lithium AA Batteries is strongly recommended. Lithium AA Batteries have a shelf life of 15 years typically and are designed to take the added heat load that will be received by placing these reloadable wands in a window. Lithium AA Batteries also do not corrode like alkaline batteries. The use of NiMH rechargeable batteries is NOT recommended. NIMH rechargeable batteries will self drain with or without use within a week typically.   Automatic 10% Discount on purchases of 5 to 10 Automatic 15% Discount on Quantity 10 or More   Roller Shade Components Index Page 12V-Reload-Wand

Mounting Clips No Thanks Wand Clips + $0.99 Energizer Lithium Batteries No Thanks Set of 8 + $16.00

 

---

Shipping Policy

Request Info / Quote

Somfy 12V Reloadable DUAL Battery Wand

Somfy 9014020 12V Reloadable Battery Wand Specifications     •    DUAL Reloadable Battery Wand - Batteries NOT Included     •    Designed for use with Somfy Motors     •    Not Disposable - End Caps Screw Off for Loading     •    Aluminum Tube and End Caps     •    Output Voltage 12 Volts DC     •    Lead Length: 16” App.     •    Tube Dimensions: 17” L x 0.792" Diameter     •    Weight: App. 8oz (0.50 lb) Total     •    Optional Mounting Clips NOT Included     •    Optional 2 Sets of 8 Energizer Lithium AA Batteries - NOT Included     •    Somfy Part # 9014020 x 2 and 9015580  NOTE: The wands must be placed side to side and can not be placed end to end like a typical dual battery wand. The connector on this wand plugs directly into the motor. Some customers have shades mounted in enclosures or cassettes that use a different connector and this may not work for those customers. View the 12V Battery Wand Connector   The use of Lithium AA Batteries is strongly recommended. Lithium AA Batteries have a shelf life of 15 years typically and are designed to take the added heat load that will be received by placing these reloadable wands in a window. Lithium AA Batteries also do not corrode like alkaline batteries. The use of NiMH rechargeable batteries is NOT recommended. NIMH rechargeable batteries will self drain with or without use within a week typically.   Automatic 10% Discount on purchases of 5 to 10 Automatic 15% Discount on Quantity 10 or More 12V-Reload-DUAL-Wand

Mounting Clips No Thanks 2 Sets Wand Clips + $1.98 Energizer Lithium Batteries No Thanks 2 Sets of 8 + $32.00

 

---

Shipping Policy

Request Info / Quote

Somfy 12V DUAL Wand Harness - 9015580

Somfy 9015580 12V Reloadable Dual Battery Wand Harness Specifications     •    Wire Harness used to connect 2 Somfy Reloadable Wands     •    Designed for use with Somfy Motors     •    Compatible with Somfy Reloadable Wand Part # 9014020     •    Overall Lead Length: 16” App.     •    Leg Lead Length: 5.5” App. Each     •    Somfy Part # 9015580  NOTE: The wands must be placed side to side and can not be placed end to end like a typical dual battery wand. The connector on this wand plugs directly into the motor. Some customers have shades mounted in enclosures or cassettes that use a different connector and this may not work for those customers. View the 12V Battery Wand Connector   Automatic 10% Discount on purchases of 5 to 10 Automatic 15% Discount on Quantity 10 or More Dual-Wand-Harness

Dual Wand Harness

 

---

Shipping Policy

Request Info / Quote

Somfy 12V Disposable Battery Wand - 9013260

Larger Somfy 12V Battery Wand Image Somfy 9013260 12V Disposable Battery Wand Specifications     •    Single Battery Wand - Disposable     •    Designed for use with Somfy LT30 Motors     •    Output Voltage 12 Volts DC     •    Lead Length: 8”     •    Lithium AA Batteries Included     •    Batteries are not replaceable     •    Dimensions: 16” L x 0.6875” W x 0.6875”H     •    Weight: App. 5.6oz (.35 lb)     •    Optional Mounting Clips - NOT Included     •    Somfy Part # 9013260     •    Somfy Part # 9014020 Reloadable wand is a good replacement     •    Special Order Item - Lead Time to Ship - 5 to 7 Days Purchases of Batteries are Not Returnable View the 12V Battery Wand Connector   Automatic 10% Discount on purchases of 5 or more   Roller Shade Components Index Page 12VWand

Mounting Clips No Thanks Yes + $0.99

 

---

Shipping Policy

Request Info / Quote

Somfy 12V Disposable DUAL Battery Wand - 9013261

Somfy 9013261 12V Disposable DUAL Battery Wand Specifications     •    Dual Battery Wand - Disposable     •    Designed for use with Somfy LT30 Motors     •    Output Voltage 12 Volts DC     •    Lead Length: 8” app.     •    Lithium AA Batteries Included     •    Batteries are not replaceable     •    Dimensions: 16” L x 0.6875” W x 0.6875”H - Each Wand     •    Weight: App. 11.2oz (0.70 lb)     •    Optional Mounting Clips - 2 Sets NOT Included     •    Somfy Part # 9013261     •    Special Order Item - Lead Time to Ship - 5 to 7 Days Purchases of Batteries are Not Returnable View the 12V Battery Wand Connector   Automatic 10% Discount on purchases of 5 or more   Typically dual wands can be replaced by single wands. The dual wand only increases the life of the battery and does not increase the lifting capacity. The single reloadable wand can typically be used as a more economical replacement. You will just need to replace the batteries more often than you did with the dual battery wand.   Roller Shade Components Index Page 12V-Dual-Wand

Mounting Clips No Thanks Yes + $1.98

 

---

Shipping Policy

Request Info / Quote

AVO 12VD100W - 12VDC 1A White Wall Plug Power Supply

The AVO 12VD100W Wall Plug DC adapter is a regulated switching power supply with 10' of connected 22AWG leads. This white power supply is designed to blend into the environment more easily.  The very compact design, as well as its color, makes it perfectly suitable for office or residential decors. Optional solutions for using this power supply with your existing Somfy 12VDC powered window treatment.     •    Butt Splice Kit :  Includes  - 2 non insulated butt splices that accept 24 to 20 AWG wires and 3" of 1/4" 3:1 white heat shrink to cover the termination when crimped. Use this kit if you have your own leads from an old battery wand or other connector.     •    Connector Kit : Includes - 2 Pin Contacts and 1 LT30 Connector. Use this kit for SELF TERMINATION and if you need the lead length 10' or Less. Requires soldering of wires to contacts.     •    Terminated Lead: We will add the LT30 Connector for you. You specify the overall total length of the lead and we'll terminate it. For lengths over 10' we will use a splice to add length up to 20' total length.     •    LT30 Lead : Separate 10' Feet of 24 AWG White Lead w/ LT30 Connector. You can cut to length and butt splice on your own. Note: With this option we do NOT provide the Butt Splice Kit .   AVO 12VD100W 12VDC 1A Wall Plug Power Adapter Specifications: ·          12VDC 1A Regulated Switch Mode Wall Plug Adapter ·          Color: White ·          Output Voltage 12 Volts DC +/- 5% at 0 to 1Amp output ·          Max Output Current 1A (1000ma) ·          Input Voltage: 100-120VAC at 0.3Amp ·          10' Tinned Copper 22 AWG Leads ·          UL Listed Class II Power Supply ·          Compact Size - Perfect for Portability or Aesthetics ·          Folding Outlet Prongs for enhanced compact portability ·          2 Prong Non-Polarized Plug ·          2 Power Supplies can be plugged into 1 Duplex Outlet ·          Built-In Short Circuit Protect w/ Auto Recovery ·          Built-In Over Load Protect w/ Auto Recovery ·          Dimensions: 1.75” W x 2.1/8" H x 1” D (not Including Outlet Prongs) ·          Weight: 0.2lb (3.2oz) With 10' Lead ·          Warranty: 2 Year - AV Outlet Facilitated ·          Easily Powers 1 - LT30 Motorized Shade ·          Optional: Butt Splice Kit, Connector Kit, Terminated to Length or LT30 Lead Automatic 10% Discount on Purchases of 5 Automatic 15% Discount on Purchases of 10 or more.  Instructions to Perform - Butt Splice and Self Termination using the Connector Kit Back View - 12VD100W White DC Wall Plug Power Supply Side View - 12VD100W White DC Wall Plug Power Supply A typical Somfy LT30 motorized shade  30” W x 65” H on a 1.5” tube uses 500ma of current and a shade 86” W x 73” H on a 1.5” tube typically requires 800ma of current. If you connect multiple shades to one transformer they must be wired in parallel. If you do not understand the difference between series and parallel networks than you should not attempt to wire multiple shades to one power supply. Our stated current draws are for use as estimates ONLY and are not specifications. Somfy states the LT30 Motors consume 1000ma (1A) per motor. Size your power supplies accordingly. Roller Shade Components Index Page 12VD100W

Splice Kit No Thanks Add Butt Splice Kit + $1.50 Connector Kit No Thanks Add LT30 Connector Kit + $1.50 Terminated No Thanks 1' Lead + $2.25 2' Lead + $2.25 3' Lead + $2.25 4 ' Lead + $2.25 5 ' Lead + $2.25 6' Lead + $2.25 7' Lead + $2.25 8' Lead + $2.25 9' Lead + $2.25 10' Lead + $2.25 11' Lead + $2.50 12' Lead + $2.75 13' Lead + $3.00 14' Lead + $3.25 15' Lead + $3.50 16' Lead + $3.75 17' Lead + $4.00 18' Lead + $4.25 19' Lead + $4.50 20' Lead + $4.75 LT30 Lead No Thanks 10' LT30 Lead + $2.50 Larger 12VDC 1A DC Adapter

 

---

Shipping Policy

Request Info / Quote

AVO 12VD300W - 12VDC 3A White Wall Plug Power Supply

The AVO 12VD300W Wall Plug DC adapter is a regulated switching power supply with 10' of connected 18AWG leads. This white power supply is designed to blend into the environment more easily.  The very compact design, as well as its color, makes it perfectly suitable for office or residential decors. This small power supply has the ability to power 3 LT30 Motorized Shades at one time. Optional solutions for using this power supply with your existing Somfy 12VDC powered window treatment.     •    Butt Splice Kit :  Includes  - 2 non insulated butt splices that accept 22 to 18 AWG wires and 3" of 1/4" 3:1 white heat shrink to cover the termination when crimped. Use this kit if you have your own leads from an old battery wand or other connector. Only 1 Kit need for connecting 1 to 3 Motors.     •    LT30 Lead : Separate 10' Feet of 24 AWG White Lead w/ LT30 Connector. You can cut to length and butt splice on your own. Note: With this option we do NOT provide the Butt Splice Kit .   AVO 12VD300W 12VDC 3A Wall Plug Power Adapter Specifications: ·          12VDC 3A Regulated Switch Mode Wall Plug Adapter ·          Color: White ·          Output Voltage 12 Volts DC +/- 5% at 0 to 3Amp output ·          Max Output Current 3A (3000ma) ·          Input Voltage: 100-240VAC 50/60Hz at 1.2Amp Full Load ·          10' Tinned Copper 18 AWG Leads ·          UL Listed Class II Power Supply ·          2 Prong Non-Polarized Plug ·          Built-In Short Circuit Protect w/ Auto Recovery ·          Built-In Over Load Protect w/ Auto Recovery ·          Dimensions: 1.77” W x 3.82" H x 1.48” D (not Including Outlet Prongs) ·          Weight: 0.55lb (8.8oz) With 10' Lead ·          Easily Powers 3 - LT30 Motorized Shade ·          Optional: Butt Splice Kit or LT30 Lead Automatic 10% Discount on Purchases of 5 Automatic 15% Discount on Purchases of 10 or more. Instructions to Perform Butt Splice using the Connector Kit A typical Somfy LT30 motorized shade  30” W x 65” H on a 1.5” tube uses 500ma of current and a shade 86” W x 73” H on a 1.5” tube typically requires 800ma of current. If you connect multiple shades to one transformer they must be wired in parallel. If you do not understand the difference between series and parallel networks than you should not attempt to wire multiple shades to one power supply. Our stated current draws are for use as estimates ONLY and are not specifications. Somfy states the LT30 Motors consume 1000ma (1A) per motor. Size your power supplies accordingly. Roller Shade Components Index Page 12VD300W

Splice Kit No Thanks Add Butt Splice Kit + $1.50 LT30 Lead No Thanks 1 - LT30 Lead + $2.50 2 - LT30 Leads + $5.00 3 - LT30 Leads + $7.50 Larger 12VDC 3A DC Adapter

 

---

Shipping Policy

Request Info / Quote

Somfy LT30 Shade Motor Power Leads - Assembled

The solution for you hard wiring needs or for the DIYER that want to build their own power supply. The connectors, pin recepticle and wires and be used for ANY Somfy LT30 motors 9V or 12V   Somfy LT30 Power Lead ·          Use with ANY Somfy LT30 Motor 9V or 12V ·          White Cable - Unmerked Externally ·          Stranded Conductors          - Tinned Copper Wire is Negative Connection          - Copper Wire is Positive Connection ·          Ships assembled an ready to use ·          Power Supply Not Included ·          Select Your Lead Length View Somfy LT30 Power Connector with Polarity Marked   Roller Shade Components Index Page LT30-Leads

Select Length 12 Inch + $1.99 5 Foot + $2.99 10 Foot + $3.99 15 Foot + $4.99 20 Foot + $5.99 Larger LT30 Lead Image

 

---

Shipping Policy

Request Info / Quote

Somfy LT30 Shade Motor Power Leads DIY KIT

The solution for you hard wiring needs or for the DIYER that want to build their own power supply. The connectors, pin recepticle and wires and be used for ANY Somfy LT30 motors 9V or 12V   Somfy LT30 Power Lead Kit ·          Use with ANY Somfy LT30 Motor 9V or 12V ·          Assembly is Required ·          Includes: 2 Pin Recepticles, 1 Connector, 10' of 24AWG White Cable   View Somfy LT30 Power Connector with Polarity Marked   Roller Shade Components Index Page LT30-LK

Larger LT30 Lead Kit Image

 

---

Shipping Policy

Request Info / Quote

Somfy LT30 Shade Motor 24AWG White Power Wire

ft

The LT30-PW is the wire used for termination to LT30 Power Connectors and Power Supplies. The White 24 AWG zipcord wire is easy to hide due to small size. The stranded wires ensure the cable is flexible. The leads feature a tin copper and copper lead for polarity identification.   Somfy LT30-PW Power Wire ·          24AWG Stranded Wire ·          White PVC Insulation - No Polarity Marking ·          Tinned Copper and Copper Zipcord Construction ·          Priced per foot - Enter qty: as # of Feet ·          Overall Dimensions: 0.115" W x 0.055" THK   Roller Shade Components Index Page LT30-PW

Larger LT30 Power Wire

 

---

Shipping Policy

Request Info / Quote

Din-Rail Power Supplies for Larger Installations

We have Power Supply Solutions for installations of 2 or more Somfy 12V LT30 and or 24V Sonesse ST30 Motors. The Power Supplies are easy to configure and we have flexible options as shown in the picture above. Power Supplies are available in 12VDC 5A and 10A as well as 24VDC 5A and 10A.   Somfy LT30 Motors The LT30 use 12VDC and are rated at 1 Amp maximum current draw. The 5 Amp power supply will power 5 - LT30 Motors and the 10 Amp Power Supply will power 10 - LT30 Motors.   Somfy Sonesse ST30 Motors The ST30 use 24VDC and are rated at 0.75 Amp maximum current draw. The 5 Amp power supply will power 6 - ST30 Motors and the 10 Amp Power Supply will power 13 - ST30 Motors.   Please go to our DIN RAIL Products Index Page for more information.   Note: Somfy LT30 users you will need to purchase the LT30 Leads to be able to connect the power supply to the motor head. The LT30 Leads can be found here on our website. Somfy LT30 12VDC Battery Wands and Power Supplies Somfy DIN Power

 

---

Shipping Policy

Request Info / Quote

Rollease SAPE53-LEFT Pin End Spring Assist - 1.5" - Left

The Rollease SAPE53 is a Pin-End Spring Assist (PESA) mechanism that is designed to ease the lifting requirements or roller shade. The PESA works with manual or motorized shade systems. The PESA does not require any pre-rotations or any type of set-up, simply install and operate. When the shade rolls down the PESA builds tension so that the shade can be raised more easily. If you have hard to pull clutch/chain driven shades this will help ease the load. This system will also help to improve battery life on Somfy Lt30 battery operated motors.   Selecting the Proper PESA STANDARD ROLL SHADES (Shade rolls back towards closet to the window) RIGHT-HAND operation shade, you must select a LEFT PESA. LEFT-HAND operation shade, you must select a RIGHT PESA.   REVERSE ROLL SHADES (Shade rolls forward furthest from the window) RIGHT-HAND operation shade, you must select a RIGHT PESA. LEFT-HAND operation shade, you must select a LEFT PESA.   Rollease SAPE53-L PESA Shade Spring Assist LEFT Specifications:     •    PESA-Left Version     •    Used with Std Rollease Shade Components     •    Used with 1.5" Rollease Tubes     •    Uses Rollease Brackets - RB360 or RB560     •    Replaces Existing REP53 End Plug in Shade Tube     •    Insertion Length - 10" How to use the Pin end Spring Assist   How to Fabricate a Roller Shade  - Making the Necessary Deductions Index Page for  Rollease, Somfy and Roller Shade Related Downloads Our Main Roller Shade Components Index SAPE53-L

Larger PESA SAPE53 Spring Assist

 

---

Shipping Policy

Request Info / Quote

Rollease SAPE53-RIGHT Pin End Spring Assist - 1.5" - RIGHT

The Rollease SAPE53 is a Pin-End Spring Assist (PESA) mechanism that is designed to ease the lifting requirements or roller shade. The PESA works with manual or motorized shade systems. The PESA does not require any pre-rotations or any type of set-up, simply install and operate. When the shade rolls down the PESA builds tension so that the shade can be raised more easily. If you have hard to pull clutch/chain driven shades this will help ease the load. This system will also help to improve battery life on Somfy Lt30 battery operated motors.   Selecting the Proper PESA STANDARD ROLL SHADES (Shade rolls back towards closet to the window) RIGHT-HAND operation shade, you must select a LEFT PESA. LEFT-HAND operation shade, you must select a RIGHT PESA.   REVERSE ROLL SHADES (Shade rolls forward furthest from the window) RIGHT-HAND operation shade, you must select a RIGHT PESA. LEFT-HAND operation shade, you must select a LEFT PESA.   Rollease SAPE53-R PESA Shade Spring Assist LEFT Specifications:     •    PESA-Right Version     •    Used with Std Rollease Shade Components     •    Used with 1.5" Rollease Tubes     •    Uses Rollease Brackets - RB360 or RB560     •    Replaces Existing REP53 End Plug in Shade Tube     •    Insertion Length - 10" How to use the Pin end Spring Assist   How to Fabricate a Roller Shade  - Making the Necessary Deductions Index Page for  Rollease, Somfy and Roller Shade Related Downloads Our Main Roller Shade Components Index SAPE53-R

Larger PESA SAPE53 Spring Assist

 

---

Shipping Policy

Request Info / Quote

Rollease SAPE03-LEFT Pin End Spring Assist - 1.25" - Left

The Rollease SAPE03 is a Pin-End Spring Assist (PESA) mechanism that is designed to ease the lifting requirements or roller shade. The PESA works with manual or motorized shade systems. The PESA does not require any pre-rotations or any type of set-up, simply install and operate. When the shade rolls down the PESA builds tension so that the shade can be raised more easily. If you have hard to pull clutch/chain driven shades this will help ease the load. This system will also help to improve battery life on Somfy Lt30 battery operated motors.   Selecting the Proper PESA STANDARD ROLL SHADES (Shade rolls back towards closet to the window) RIGHT-HAND operation shade, you must select a LEFT PESA. LEFT-HAND operation shade, you must select a RIGHT PESA.   REVERSE ROLL SHADES (Shade rolls forward furthest from the window) RIGHT-HAND operation shade, you must select a RIGHT PESA. LEFT-HAND operation shade, you must select a LEFT PESA.   Rollease SAPE03-L PESA Shade Spring Assist LEFT Specifications:     •    PESA-Left Version     •    Used with Std Rollease Shade Components     •    Used with 1.25" Rollease Tubes     •    Uses Rollease Brackets - RB360 or RB560     •    Replaces Existing REP0 End Plug in Shade Tube     •    Insertion Length - 10" How to use the Pin end Spring Assist   How to Fabricate a Roller Shade  - Making the Necessary Deductions Index Page for  Rollease, Somfy and Roller Shade Related Downloads Our Main Roller Shade Components Index SAPE03-L

Larger PESA SAPE53 Spring Assist

 

---

Shipping Policy

Request Info / Quote

Rollease SAPE03-RIGHT Pin End Spring Assist - 1.25" - RIGHT

The Rollease SAPE03 is a Pin-End Spring Assist (PESA) mechanism that is designed to ease the lifting requirements or roller shade. The PESA works with manual or motorized shade systems. The PESA does not require any pre-rotations or any type of set-up, simply install and operate. When the shade rolls down the PESA builds tension so that the shade can be raised more easily. If you have hard to pull clutch/chain driven shades this will help ease the load. This system will also help to improve battery life on Somfy LT30 battery operated motors.   Selecting the Proper PESA STANDARD ROLL SHADES (Shade rolls back towards closet to the window) RIGHT-HAND operation shade, you must select a LEFT PESA. LEFT-HAND operation shade, you must select a RIGHT PESA.   REVERSE ROLL SHADES (Shade rolls forward furthest from the window) RIGHT-HAND operation shade, you must select a RIGHT PESA. LEFT-HAND operation shade, you must select a LEFT PESA.   Rollease SAPE03-R PESA Shade Spring Assist LEFT Specifications:     •    PESA-Right Version     •    Used with Std Rollease Shade Components     •    Used with 1.25" Rollease Tubes     •    Uses Rollease Brackets - RB360 or RB560     •    Replaces Existing REP53 End Plug in Shade Tube     •    Insertion Length - 10" How to use the Pin end Spring Assist   How to Fabricate a Roller Shade  - Making the Necessary Deductions Index Page for  Rollease, Somfy and Roller Shade Related Downloads Our Main Roller Shade Components Index SAPE03-R

Larger PESA SAPE53 Spring Assist

 

---