In-Wall CL2 CL3 Speaker Cable

Our In-Wall CL2 and CL3 Speaker Cables are Sold by the foot or by the Spool

Liberty Extra-Flex - Truly a high stand count In-Wall CL3 speaker cable with 105 Stands per conductor and a round molded outer jacket. The smooth round outer jacket of the ExtraFlex series of In-Wall CL3 Speaker Cables results an easier cable to pull and the thick insulation ensures that if you do snag the cable it will not rip through the insulation resulting in conductor damage. In-wall CL3 Speaker Cables with molded jackets are better than cables with sleeved jackets because they maintain a very tight consistent inner twisting of the conductors which is essential for noise cancellation. When an In-Wall speaker cable with a sleeved jacket jacket is bent during installation the inner twisting of the cable distorts as the cable flattens out and the jacket stretches. The use of higher strand counts in the Extra Flex In-Wall CL3 Speaker Cable reduces the skin effect in cables and makes for a more flexible cable. The skin effect is a phenomenon that causes current flow in a round conductor to be concentrated more to the surface of the conductor at higher frequencies increasing the apparent resistance of the conductor at high frequencies.

Liberty Ultra-Cap THX Certified - This cable is the pinnacle of In-Wall Speaker Cables with THX Speaker Cable Certification ensuring strict performance standards are achieved. The Liberty Ultra-Cap In-Wall CL3 Speaker Cable features truly high strand counts of 174 conductors in the 14AWG and 261 conductors in the 12AWG conductors. The strands are grouped in a 3 bundle twisted rope lay construction. The very high strand count twisted rope lay construction of the Ultra-Cap ThX certified In-Wall CL3 Speaker Cable is used to further reduce the skin effect which results in a high performance speaker cable with very low loss and creates an In-Wall CL3 Speaker cable that is more flexible. The skin effect is a phenomenon that causes current flow in a round conductor to be concentrated more to the surface of the conductor at higher frequencies increasing the apparent resistance of the conductor at high frequencies.
The UltraCap series of In-Wall Speaker Cables features yet an even thicker outer jacket than the ExtraFlex providing yet even more mechanical protection. The smooth round outer jacket results an easier In-Wall Speaker cable to pull and the thick insulation ensures that if you do snag the In-Wall Cl3 Speaker Cable it will not rip through the insulation resulting in conductor damage. In-wall Speaker Cables with molded jackets are better than cable with sleeved jackets because they maintain a very tight consistent inner twisting of the conductors which is essential for noise cancellation. When an In-Wall speaker cable with a sleeved jacket jacket is bent during installation the inner twisting of the cable distorts as the cable flattens out and the jacket stretches.