Home > Seat Shakers, Amplifiers


Live in Virginia ?? Give us a call 1-877-271-5398

We'll be happy to show you the IBEAM or Buttkicker in action.

We purchase our Buttkicker and IBEAM Products directly from the MFG and are bound by Minimum Advertised Price Policies (MAP). If you do not feel we are competitive or would like a competitive price quote please feel free to contact us at 1-877-271-5398 or quote@av-outlet.com Buy your Buttkicker products from an Authorized and Direct Dealer, not from Ebay. We can save you the auction hassles!!



Opens in New Window

Shipping Included on Orders of $25 or More
Buttkicker Couch Mounting Kit 
   Add to basketView Cart

The Buttkicker BK-CMAK Couch Mounting Accessory Kit eliminates the troublesome mounting modification previously necessary to adapt shaker to your couch or recliner.

 

Simply place the accessory plate under one of the couch/chair legs and attach the included isolators to the remainder of the chair legs. Its very simple and very effective. No matter where you place the accessory plate the vibration will be evenly distributed to the whole couch. 1 Buttkicker will easily provide enough energy to shake the couch unlike the competitor’s tactical shakers.

 

View the BK-CMAK PDF Instructions

 

BK-CMAK Includes:

§          Mounting Plate with Top Rubber Isolator and bottom mounted rubber feet

§          Five Additional Rubber Isolators for the placing under the chair.

§          Mounting Hardware and wrench

 

**BK-LFE Sold Separately



BK-CMAK
Buttkicker Couch Mounting Kit

View Larger Image
 
 


Opens in New Window

Shipping Included on Orders of $25 or More
Buttkicker LFE KIT 

Sale Was    Is   
 Add to basketView Cart

Complete Pre-Package Kit now available at an unbeatable price.

Compare the cost of the individual Pieces.



Buttkicker LFE Kit Includes:

§          BK-CMAK - Couch Mounting Accessory Kit - Qty: 1

§          BK-LFE – Shaker – Qty:1

§          BKA1000-4A – Amplifier - Qty: 1

§          Cable Kit – Speaker Wire, Sub Y Adapter, Sub Pre-out Audio Cable

 

ButtKicker LFE Specifications

§          Dimensions: 5.375" high x 5.5" wide, oval

§          Frequency Response: 5 - 200 Hz

§          Weight: 11 lbs., 5 kg.

§          Nominal Impedance: 4 ohms

§          Power Handling: 400 watts min. / 1500 watts max.

 

ButtKicker BKA1000-4A Amplifier Specifications

§          1100 Watts @ 4 ohms

§          2100 Watts @ 2 ohms

§          Powers up to 4 BK-LFE Transducer (Series/Parrelell Network 4 Ohm Load)

§          Class D switching technology

§          Variable high cutoff, 40 to 160 Hz

§          Low cutoff, 25 Hz switchable

§          RCA and ¼” inputs with 160mVolt and 1.25 Volt sensitivities 

§          Five way binding post speaker wire output

§          120v Power NOT switchable

§          Convection cooling, i.e. no fan

§          12"W x 11"L x 4.375"H,

§          23 lbs / 10.5 kg

 

BK-CMAK Includes:

§          Mounting Plate with Top Rubber Isolator and bottom mounted rubber feet

§          Five Additional Rubber Isolators for the placing under the chair.

§          Mounting Hardware and wrench



LFE KIT
Buttkicker LFE KIT
 


Opens in New Window

Shipping Included on Orders of $25 or More
Buttkicker BK-LFE Seat Shaker Tactile Transducer 
   Add to basketView Cart

The only tactile transducer designed specifically to take advantage of the .1 and LFE channels, the ButtKicker® LFE features extended low frequency response for powerful bass response and special effects.   

The ButtKicker LFE (low frequency effects) utilizes a patented magnetic suspension which is different from any other speaker or shaker and can be used couches, theater seating, platforms, and any type of structure. The ButtKicker accurately reproduce the "feeling" range of many natural and man-made sounds, such as earthquakes, thunderstorms, rocket launches, waves, explosions, tornadoes, volcanoes, dinosaurs and sound effects. 
      Different from other shakers or tactile transducers that use voice coil technology, the ButtKicker is much more powerful, more musical (linear) and offer true infrasonic or low frequency response with their resonant frequency of 9 Hz and range of 5 - 200 Hz.
      One ButtKicker LFE will easily replace 2 - 4 or more of the other types of shakers. The ButtKicker is used in: Theme park attractions; Specialty theaters; Simulators; Virtual reality machines;
Arcade and amusement rides/games; and Custom Home theaters.

     The Buttkicker LFE products are designed specifically for low frequency effects. The Buttkicker Concert products are designed specifically for use with music and do not have the same punch on the low end we want in theater and amusement applications.

 

ButtKicker LFE Specifications

§          Dimensions: 5.375" high x 5.5" wide, oval

§          Frequency Response: 5 - 200 Hz

§          Weight: 11 lbs., 5 kg.

§          Nominal Impedance: 4 ohms

§          Power Handling: 400 watts min. / 1500 watts max.

 

BK-LFE Shaker  – User Guide and Installation Notes  – PDF Spec Sheet 22 Pages 235KB

BK1000-4 Power Amplifier User Guide and Installation Notes – PDF Spec Sheet 108KB

Wiring Diagram for the Buttkicker BK-LFE and BK1000-4 PDF Document

If wiring the seats seems a bit troublesome consider the BK-QCP.

The Quick Connect Package makes installation a breeze and includes all of the necessary components



BK-LFE
Buttkicker BK-LFE Seat Shaker Tactile Transducer

View Larger BK-LFE Image
 
 


Opens in New Window

Shipping Included on Orders of $25 or More
Buttkicker BK-Mini-LFE Seat Shaker Tactile Transducer 
   Add to basketView Cart

       The smallest tactile transducer designed specifically to take advantage of the .1 and LFE channels, the ButtKicker® Mini - LFE features extended low frequency response for powerful bass response and special effects.   

The ButtKicker LFE (low frequency effects) utilizes a patented magnetic suspension which is different from any other speaker or shaker and can be used couches, theater seating, platforms, and any type of structure. The ButtKicker accurately reproduce the "feeling" range of many natural and man-made sounds, such as earthquakes, thunderstorms, rocket launches, waves, explosions, tornadoes, volcanoes, dinosaurs and sound effects.

       The Buttkicker LFE products are designed specifically for low frequency effects. The Buttkicker Concert products are designed specifically for use with music and do not have the same punch on the low end we want in theater and amusement applications.

 

ButtKicker BK-Mini-LFE Specifications

§          Power Handling: 50 watts min. / 250 watts max.

§          Frequency Response: 5 - 200 Hz

§          Nominal Impedance: 4 ohms

§          Versatile Mounting allows for side or bottom mounting

§          A Tactile Transducer that fits where others will not

§          Weight: 2 lbs., 5 kg.

§          Dimensions: 4.25"L x 4.75" W x 3"H

 

The BK-Mini-LFE can be powered by the BK-Gamer Power Supply BK3A-Mini-Amp, by the BKA1000-4A or by any other amplifier designed specifically for use with subwoofers.

 

BK-LFE Shaker  – User Guide and Installation Notes  – PDF Spec Sheet 22 Pages 235KB

BK1000-4 Power Amplifier User Guide and Installation Notes – PDF Spec Sheet 108KB

Wiring Diagram for the Buttkicker BK-Mini-LFE and BKA1000-4A or BK3A-Mini-Amp PDF Document

 

If wiring the seats seems a bit troublesome consider the BK-QCP.

The Quick Connect Package makes installation a breeze and includes all of the necessary components



BK-Mini-LFE
Buttkicker BK-Mini-LFE Seat Shaker Tactile Transducer

View Larger BK-Mini-LFE Image
 
 


Opens in New Window

Shipping Included on Orders of $25 or More
Buttkicker BKA1000-4a Subwoofer Frequency Amplifier 
   Add to basketView Cart

    The ButtKicker Power Amplifier.  Designed specifically to power the ButtKicker LFE, the BKA-1000-4A is an incredible value, chock full of features designed to make the installation and operation of the ButtKicker easier and more affordable.

     No preamplifier is required.  For home theater, just use a RCA cable to go from your processor's subwoofer out* to the RCA input on the ButtKicker Amplifier.  Then, use 12 gauge speaker wire from the amplifier to the ButtKicker.  It's as simple as that - plug 'n play.
     With 1100 watts into 4 ohms and 2100 watts into 2 ohms. 
Not only does the ButtKicker Amplifier have over 2100 watts of power, it adds low and high cutoff filters at no additional cost.

     The BKA1000-4A is able to power up to 4 - 4ohm BK-LFE Transducers or 8 BK-Mini-LFE Transducers.  
 

View the BKA1000-4A Rear Panel

 

ButtKicker BKA1000-4A Amplifier Specifications

§          1100 Watts @ 4 ohms

§          2100 Watts @ 2 ohms

§          Powers up to 4 BK-LFE Transducer (Series/Parrelell Network 4 Ohm Load)

§          Class D switching technology

§          Variable high cutoff, 40 to 160 Hz

§          Low cutoff, 25 Hz switchable

§          RCA and ¼” inputs with 160mVolt and 1.25 Volt sensitivities 

§          Five way binding post speaker wire output

§          Convection cooling, i.e. no fan

§          12"W x 11"L x 4.375"H,

§          23 lbs / 10.5 kg

 

BKA1000-4a Power Amplifier User Guide and Installation Notes – PDF Spec Sheet 108KB

BK-LFE Shaker  – User Guide and Installation Notes  – PDF Spec Sheet 22 Pages 235KB

Wiring Diagram for the Buttkicker BK-LFE and BKA1000-4A PDF Document

 

If wiring the seats seems a bit troublesome consider the BK-QCP.

The Quick Connect Package makes installation a breeze and includes all of the necessary components



BKA1000-4A
Buttkicker BKA1000-4a Subwoofer Frequency Amplifier

Larger BKA1000-4A Image
 
 


Opens in New Window

Shipping Included on Orders of $25 or More
Buttkicker BK3A-Mini-Amp 100W Tactile/Subwoofer Amplifier 
   Add to basketView Cart

The Buttkicker BK3A-Mini-Amp will power 1 Buttkicker Mini LFE or Concert transducer.

 

BK3A-Mini-Amp Specifications

·          Auto Signal Sensing 100W Amplifier

·          Low Filter Cutoff Switch – 25hz

·          High Cutoff Frequency Knob – Variable 160Hz to 40Hz

·          Volume Control Knob

·          Line Level RCA Input

·          Banana Jack Speaker Terminals

·          Dimensions: 12.9” L x 3.6” H x 9.3W

·          Weight: 10lbs 2oz.

·          Accessories Included

o         Speaker Wire w/Banana Plugs

o         Power Cord

o         Removable legs to stand amplifier on edge

·          Warranty: 1 Year

 

View the BK3A-Mini-Amp Back

View the BK-Mini-LFE Transducer



BK3A-Mini-AMP
Buttkicker BK3A-Mini-Amp 100W Tactile/Subwoofer Amplifier

View BK3A-Mini-Amp Larger Image
 
 


Opens in New Window

Shipping Included on Orders of $25 or More
Buttkicker RI-K28-1 Small Vibration Isolators - Sold Individually 
   Add to basketView Cart

The Buttkicker RI-K28 rubber vibration isolators are designed to support couches, chairs, platforms for the purpose of maximizing the vibration effect produced by the Buttkicker Transducers. The RI-K28 vibration isolators will allow the chair, couch platform to vibrate more freely and reduce the the amount of vibration energy transferred to the floor.

 

Buttkicker RI-K28-1 Vibration Isolator Specifications

·          Rubber Isolator designed for individual seating, chairs and sofas

·          Metal plate imbedded in the rubber to allow proper tensioning of mounting screws

·          Non-Marking Rubber - Indoor Use - Only

·          Durometer Hardness 70A (Medium Hard by Classification not by feel)

·          Estimated Load Capacity Per Each - 100lb (Not Specified by MFG)

·          Height: 0.750”

·          Width: 1.5”

·          Mounting Screw Hole Diameter: 0.250”

·          Mounting Hardware not included

·          Sold as a QUANTITY OF 1

Automatic Quantity Discounts (Add Qty. to Cart for discount)

Buy 10 to 20  - Receive a 10% Discount

Buy 20 to 30  - Receive a 15% Discount

buy 30 or more - Receive a 20% Discount



RI-K28-1
Buttkicker RI-K28-1 Small Vibration Isolators - Sold Individually

Larger RI-K28 Vibration Isolators
 
 


Opens in New Window

Shipping Included on Orders of $25 or More
Buttkicker RI-K28-4 Small Vibration Isolators Set of 4 

Sale Was    Is   
 Add to basketView Cart

The Buttkicker RI-K28 rubber vibration isolators are designed to support couches, chairs, platforms for the purpose of maximizing the vibration effect produced by the Buttkicker Transducers. The RI-K28 vibration isolators will allow the chair, couch platform to vibrate more freely and reduce the the amount of vibration energy transferred to the floor.

 

Buttkicker RI-K28 Vibration Isolator Specifications

·          Rubber Isolator designed for individual seating, chairs and sofas

·          Metal plate imbedded in the rubber to allow proper tensioning of mounting screws

·          Non-Marking Rubber

·          Durometer Hardness 70A (Medium Hard by Classification not by feel)

·          Estimated Load Capacity Per Each - 100lb (Not Specified by MFG)

·          Height: 0.750”

·          Width: 1.5”

·          Mounting Screw Hole Diameter: 0.250”

·          Mounting Hardware not included

·          Sold as a SET OF 4



RI-K28-4
Buttkicker RI-K28-4 Small Vibration Isolators Set of 4

Larger RI-K28 Vibration Isolators
 
 


Opens in New Window

Shipping Included on Orders of $25 or More
Vibration Isolators VI-43 with Threaded Stud - Sold Individually 
   Add to basketView Cart

     The VI-43 rubber vibration isolators are designed to support couches, chairs, platforms etc. for the purpose of maximizing the vibration effect produced by the Buttkicker Transducers. The VI-43 vibration isolators will allow the chair, couch platform to vibrate more freely and reduce the the amount of vibration energy transferred to the floor. These vibration isolators are particularly nice because the metal plate is at the top surface which allows the isolator to be attached without compressing the rubber. Additional the VI-43 isolator is a little taller which will lift the chair out of thick plush carpet. The VI-43 rubber isolators are supplied with a threaded stud and locking nut.

     The goal of using an isolator like this is to get the base of the chair off the floor and to provide a new foot that has the ability to let the chair float more easily. The RI-K28 isolators do a good job of this on the thinner more commercial style carpets but if you have a thicker more plush carpet the VI-43 isolator will provide better results.

 

VI-43 Rubber Vibration Isolator Specifications:

·          Rubber Isolator designed for individual seating, chairs and sofas

·          Metal plate and Threaded Stud at top surface

        -     Advantage: The rubber won't compress when attaching to chair

        -     Advantage: More Rubber - More Action

·          Neoprene Rubber can be used indoors or Outdoors

·          Durometer Hardness 50A (Medium Hard by Classification not by feel)

·          Load Capacity Per Each - 80lb (As Specified by MFG)

·          5/16-18 Threaded Stud with Locking Nut

·          Threaded Stud Length - 0.600"

·          Height: 1” Not Including Stud

·          Width: 1.6”

·          Sold as a QUANTITY OF 1

Automatic Quantity Discounts (Add Qty. to Cart for discount)

Buy 10 to 20  - Receive a 10% Discount

Buy 20 to 30  - Receive a 15% Discount

buy 30 or more - Receive a 20% Discount



VI-43
Vibration Isolators VI-43 with Threaded Stud - Sold Individually

Larger VI-43 Vibration Isolators
 
 


Opens in New Window

Shipping Included on Orders of $25 or More
Buttkicker RDB Series - Large Vibration Isolators 
Was    Is    Add to basketView Cart

Buttkicker RDB series rubber vibration isolators are designed to support the heavy weight of platforms for the purpose of maximizing the vibration effect produced by the Buttkicker Transducers. The RDB series vibration isolators will allow the platform to vibrate more freely and reduce the the amount of vibration energy transferred to the sub floor.

Sizing – Take the total weight of applied to isolators (Platform, Chairs, People etc.) and divide that by the # if isolators used.