Projection Screen material cut to size without borders is for the permanent DIY application, most commonly Home Theater. The material should be stretched over a frame and stapled in place much like making a painting canvas or you can try one of our more advanced designs. Adhesive Backed Blackout Framing Fabric Minimizes unwanted reflections on the frame. Need Help With Instructions? DIY Projection Screen Frame Fabrication Instruction Index   Da-Lite and Draper Projection Screen Material Comparisons

---

Shipping Included on Orders of $25 or More

Draper M1300 Projection Screen Material Cut to Size

sq. ft

The Draper M1300 material is a good choice for projectors with contrast ratios or 2000:1 or better in controlled lighting environments with the typical 1000 lumen projector. The white screen material produces neutral colors without loss of brightness. We are always happy to assist with projection screen material select. Do not hesitate to call. We will need to know your projector MFG, Model, Lumens, Contrast Ratio and Technology (LCD/DLP) Draper M1300 Projection Screen Material Cut to Size     •    Unsupported 100% Flexible Vinyl Material     •    Color: White     •    Low Sheen Surface w/ very slight emboss     •    Must be Stretched when used     •    Gain: 1.0     •    Viewing Angle: +/- 70 Deg off of Normal     •    Sold by the Square Foot     •    Shipped Rolled - Always     •    Finished Tolerance +/- 0.25" Projection Screen Material is NOT returnable unless it is defective Orders less than 21sqft will incur a $15 Shipping fee Sizes over 78" x 78" will require a Shipping Quote because shipping length issues 78" x 72" is ok but 78"x 79" Requires Quote   Please enter desired dimensions in the space provided. Please enter the qty as Sq. Ft. (Rounded up to a Whole Number) 41.1 sqft = 42 Billable sqft   Inch Calculation to sqft: 58“ x 104” = 6032 Then divide your Square Inches by 144 to get your sqft 6032 / 144 = 41.88 sqft  Rounded to 42 sqft M1300

Screen Size: Larger M1300 Image

 

---

Shipping Included on Orders of $25 or More

Draper M2500 Projection Screen Material Cut to Size

sq. ft

The Draper M2500 material is a good choice for lower brightness projectors (less than 600 lumen, Typically CRT) with contrast ratios or 2000:1 or better in moderately controlled lighting environments. The fleshy off-white color of this material provides a near neutral colors with enhanced brightness. This is perhaps the best material for use with CRT projectors where the reduced viewing angle can be tolerated. We are always happy to assist with projection screen material select. Do not hesitate to call. We will need to know your projector MFG, Model, Lumens, Contrast Ratio and Technology (LCD/DLP) Draper M2500 Projection Screen Material Cut to Size     •    Unsupported 100% Flexible Vinyl Material     •    Color: Fleshy Off-White     •    Low Gloss Embossed Surface w/ Pearlescence     •    Must be Stretched when used     •    Gain: 2.1     •    Viewing Angle: +/- 30 Deg off of Normal     •    Sold by the Square Foot     •    Shipped Rolled - Always     •    Finished Tolerance +/- 0.25" Projection Screen Material is NOT returnable unless it is defective Orders less than 21sqft will incur a $15 Shipping fee Sizes over 78" x 78" will require a Shipping Quote because shipping length issues 78" x 72" is ok but 78"x 79" Requires Quote   Please enter desired dimensions in the space provided. Please enter the qty as Sq. Ft. (Rounded up to a Whole Number) 41.1 sqft = 42 Billable sqft   Inch Calculation to sqft: 58“ x 104” = 6032 Then divide your Square Inches by 144 to get your sqft 6032 / 144 = 41.88 sqft  Rounded to 42 sqft M2500

Screen Size: Larger M2500 Image

 

---

Shipping Included on Orders of $25 or More

Draper HiDef Gray Projection Screen Material Cut to Size

sq. ft

The Draper HiDef Gray material is a good choice for high brightness projectors (2500 lumens or better) with moderate contrast ratios of 2000:1 and for any projector with less than a 1000:1 contrast ratio. The darker gray projection screen material will enrich the colors and improve the black levels of projectors. The darker gray will shift the whites which is why this material is not recommended by us for use with lower brightness projectors with contrast ratios of 2000:1 or better. We are always happy to assist with projection screen material select. Do not hesitate to call. We will need to know your projector MFG, Model, Lumens, Contrast Ratio and Technology (LCD/DLP) Draper HiDef Gray Projection Screen Material Cut to Size     •    Unsupported 100% Flexible Vinyl Material     •    Color: Gray     •    Low Sheen very slightly Embossed Surface     •    Must be Stretched when used     •    Gain: 0.9     •    Viewing Angle: +/- 50 Deg off of Normal     •    Sold by the Square Foot     •    Shipped Rolled - Always     •    Finished Tolerance +/- 0.25" Projection Screen Material is NOT returnable unless it is defective Orders less than 21sqft will incur a $15 Shipping fee Sizes over 78" x 78" will require a Shipping Quote because shipping length issues 78" x 72" is ok but 78"x 79" Requires Quote   Please enter desired dimensions in the space provided. Please enter the qty as Sq. Ft. (Rounded up to a Whole Number) 41.1 sqft = 42 Billable sqft   Inch Calculation to sqft: 58“ x 104” = 6032 Then divide your Square Inches by 144 to get your sqft 6032 / 144 = 41.88 sqft  Rounded to 42 sqft HiDef Grey

Screen Size: Larger HiDef Gray Image

 

---