Shipping Included on Orders of $25 or More
| X10 WS12A / RWS17 Dimmer Switch - Incandescent Loads - White/Ivory
|
|
T he X10 WS12A is a wire-in modules for incandescent lamps that fits into a standard utility box that provide both On/Off and dimming capabilities through the switch manually or through the use of separate X10 controllers like the IR543, ActiveHome Pro Software, UR74A remote controls etc. The WS12A is ideal for controlling bedroom, living room, family room, and Home theater light fixtures.
The WS12A Control Dimmer Switch responds to "All Lights Off", "All Lights Off", unit On/Off and unit Dim/Brighten commands from any X10 controller or software. Housecodes and unit code settings are located behind the easy to remove rocker switch. The switch can be manually turned On/Off by a quick press of the paddle or by using the slide switch below the rocker paddle. For dimming simply press and hold the rocker switch.
The WS12A can be used in standard stand alone switch applications or 3-Way/4-Way wiring simplifying ordering. When used in 3/4-Way applications the X10 WS14A companion switch is required. The WS12A is rated at 120VAC/60Hz. 500W (incandescent only). 40 Watts minimum. Not recommended for use with Fluorescent or Low Voltage Lighting.
The dimmer switch is scene capable with the use of the ActiveHome Pro software which allows the user to numerically set the level of brightness or using your advanced Home Theater remote by programming the Dim/Brighten IR commands for a tested duration to achieve the desired dim level. This switch does not recall or remember settings.
The X10 WS12A and X10Pro XPD3 are the same switches and can be used interchangeably.
X10 WS12A / RWS17 / XPD3 Dimming Rocker Switch Specifications:
• Single, 3 Way or 4 Way Applications
• Incandescent Lighting Only Use
• Dimming On/Off Rocker Switch
• X10 Control Capable
• 120VAC - 500W 4Amp Max
• Fits Std. switch Box - Depth Required - 1.57"
• X10 Code Switches Located behind Rocker Panel
• Includes White and Ivory Trim Paddles
• Optional Decora Trim Plates
• 1yr Warranty
Stocked as WS12A and RWS17 but is the same as the X10Pro XPD3
View the X10 Cross Reference List
View the X10 WS12A Ivory Image
View the X10 WS12A Code Switch Location Image
View the X10 WS12A Manual PDF
View our X10 FAQ and Downloads Page
WS12A / RWS17
|
 | |
| |
|
|
Shipping Included on Orders of $25 or More
| X10 WS13A Switch Incandescent, Inductive or Fluorescent Loads White/Ivory
|
|
The X10 WS13A is a wire-in module for incandescent, fluorescent and inductive loads that fits into a standard utility box that provides both On/Off capabilities through the switch manually or through the use of separate X10 controllers like the IR543, ActiveHome Pro Software, UR74A remote controls etc. The WS13A is ideal for controlling bedroom, living room, family room, and Home Theater light fixtures as well as appliances and motors where non-dimming applications are required.
The WS13A Control Dimmer Switch responds to "All Lights Off", "All Lights Off" and unit On/Off commands from any X10 controller or software. Housecodes and unit code settings are located behind the easy to remove rocker switch.
The WS13A can be used in standard stand alone switch applications or 3-Way/4-Way wiring simplifying ordering. When used in 3-Way applications the X10 WS14A companion switch is required. The WS13A is rated at 120VAC/60Hz. 1800W (Incandescent, Fluorescent, Appliance and Motor Loads).
IMPORTANT: The WS13A switch requires a Neutral connection. This is not the same as ground. If you are unsure whether or not. Please consult the wiring diagram in the manual below.
The X10 WS13A and X10Pro XPS3 are the same switches and can be used interchangeably.
X10 WS13A Rocker Switch Specifications:
• Single, 3 Way or 4 Way Applications
• Incandescent, Fluorescent, Inductive Lighting Appliance or Motor Use
• On/Off Rocker Switch
• X10 Control Capable
• 120VAC - 1800W 20Amp Max
• Fits Std. switch Box - Depth Required - 1.50"
• X10 Code Switches Located behind Rocker Panel
• Connection: Holes w/ Screws - See Image Link Below
• Includes White and Ivory Trim Plates, Paddles Etc.
• 1yr Warranty
Stocked as WS13A but is the same as the X10Pro XPS3
View the X10 Cross Reference List
View the X10 WS13A Ivory Image
View the X10 WS13A Back Image
View the X10 WS13A Code Switch Location Image
View the X10 WS13A Manual PDF
View our X10 FAQ and Downloads Page
WS13A
|
|
|
Shipping Included on Orders of $25 or More
| X10 WS14A Companion Slave Switch White/Ivory
|
|
T he X10 WS14A is a companion switch to the WS12A,WS13A,XPD3,XPS3 and XPDI3 X10 / X10Pro switches lamps that fits into a standard utility box. this switch is to only be used as a companion switch in 3/4 way applications and will not operate independently.
The X10 WS14A and X10Pro XPSS are the same switches and can be used interchangeably.
X10 WS14A Companion / Slave Rocker Switch Specifications:
• Companion Switch for 3 Way or 4 Way Applications
• Compatible with WS12A, WS13A, XPDI3
• Fits Std. switch Box - Depth Required - 1.50"
• Connection: Holes w/ Screws - See Image Link Below
• X10 Code Switches - Not Required for Companion Switches
• Includes White and Ivory Trim Plates, Paddles Etc.
• 1yr Warranty
Stocked as WS14A but is the same as the X10Pro XPSS
View the X10 Cross Reference List
View the X10 WS14A Ivory Image
View the X10 WS14A Back Image
View the X10 WS14A Manual PDF
View our X10 FAQ and Downloads Page
WS14A
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro XPDI3 Dimming Switch Incandescent / Inductive / Low-Voltage - White/Ivory
|
|
The X10 Pro XPDI3 is a wire-in module for incandescent, low-voltage lighting, inductive and small motor loads that fits into a standard utility box that provides both Dimming and On/Off capabilities through the switch manually or through the use of separate X10 controllers like the IR543, ActiveHome Pro Software, UR74A remote controls etc. The XPDI3 is ideal for controlling bedroom, living room, family room, and Home Theater light fixtures as well as and motors where dimming applications are required.
The XPDI3 Control Dimmer Switch responds to "All Lights Off", "All Lights Off", unit On/Off and unit Dim/Brighten commands from any X10 controller or software. Housecodes and unit code settings are located behind the easy to remove rocker switch.
The XPDI3 can be used in standard stand alone switch applications or 3-Way/4-Way wiring simplifying ordering. When used in 3-Way applications the X10 WS14A companion switch is required. The XPDI3 is rated at 120VAC/60Hz. 40W to 500W Loads. (Incandescent and Motor Loads).
The dimmer switch is scene capable with the use of the ActiveHome Pro software which allows the user to numerically set the level of brightness or using your advanced Home Theater remote by programming the Dim/Brighten IR commands for a tested duration to achieve the desired dim level. This switch does not recall or remember settings
Important: The XPDI3 switch requires a Neutral connection. This is not the same as ground. If you are unsure whether or not. Please consult the wiring diagram in the manual below.
Note: While this switch can be used for fan motors it may cause a hum in the motor. This may occur with any dimmer connected to a motor regardless of if it is a X10 switch or not.
X10 Pro XPDI3 Dimming Rocker Switch Specifications:
• Single, 3 Way or 4 Way Applications
• Incandescent, Low Voltage and Inductive Lighting or Small Motor Use
• Dimming On/Off Rocker Switch
• X10 Control Capable
• 120VAC - 500W 4Amp Max
• Fits Std. switch Box - Depth Required - 1.57"
• Includes White and Ivory Rocker Paddles
• White / Ivory Trim Plates - Not Included See Options
• 1yr Warranty
View the X10Pro XPDI3 Ivory Image
View the X10Pro XPDI3 Manual PDF
View our X10 FAQ and Downloads Page
XPDI3
|
| |
| |
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro PLW02 Dimming 3 Way Switch Module W/ Companion - White
|
|
T he X10Pro PLW02 is a wire-in switch module for incandescent lamps that fits into a standard utility box and provides On/Off as well as dimming capabilities. This PLW02 kit includes a X10 pushbutton wall switch module and a companion for 3 way switch wiring. This X10 switch is designed to replace standard Toggle switches using the existing wall plate. The switch can be used manually or with the use of separate X10 controllers like the IR543, ActiveHome Pro Software, UR74A remote controls etc. The PLW02 is ideal for controlling bedroom, living room, family room, Home Theater light fixtures etc.
The PLW02 manually provides local ON/Off control of lights and remotely responds to "All Lights Off", "All Lights Off", unit On/Off and unit Dim/Brighten commands from any X10 controller or X10 software. A slide switch is located under the push button to disconnect the circuit so light bulbs may be changed without accidental remote operation of the light fixture. X10 house codes and unit code settings are easily accessible on the main PLW02 switch. The companion switch does not require X10 codes.
The WS12A can be used in standard stand alone switch applications or 3-Way/4-Way wiring simplifying ordering. When used in 3/4-Way applications the X10 PCW03 companion switch is required (1 is included). The PLW02 is rated at 120VAC/60Hz. 500W (incandescent only). 40 Watts minimum. Not recommended for use with Fluorescent or Low Voltage Lighting.
The X10 WS4777 and X10Pro PLW02 are the same 3-way kits and can be used interchangeably.
X10 PRO PLW02 Dimming Toggle Push Button Switch Specifications:
• Color: White
• Single, 3 Way or 4 Way Applications
• Incandescent Lighting Only Use
• On/Off Pushbutton Toggle Switch
• X10 Control Capable
• Remotely Responds to X10: "All Lights Off", "All Lights Off", On/Off, Dim/Brighten
• 120VAC - 500W 4Amp Max
• Fits Std. Switch Box and Wall Plate - Depth Required - 1.17"
• Easy Access X10 Code Switches
• Includes: PLW03 Master Switch and PCW03 Companion Switch.
• 1yr Warranty
Stocked as X10Pro PLW03 but is the same as the X10 WS4777
View the X10 Cross Reference List
View the X10 Pro PLW02 Back Image
View the X10 Pro PLW02 3-Way and 4-Way Wiring Instructions PDF
View the X10 Pro PLW02 Manual PDF
View the X10 WS4777 Manual PDF
View our X10 FAQ and Downloads Page
PLW02
|
|
|
Shipping Included on Orders of $25 or More
| X10 WS467 Dimming Switch Module - White
|
|
T he X10 WS467 is a wire-in switch module for incandescent lamps that fits into a standard utility box and provides On/Off/ as well as dimming capabilities. The X10 WS467 switch is designed to replace standard Toggle switches using the existing wall plate. The switch can be used manually or with the use of separate X10 controllers like the IR543, ActiveHome Pro Software, UR74A remote controls etc. The WS467 is ideal for controlling bedroom, living room, family room, Home Theater light fixtures etc.
The X10 WS467 switch provides local ON/Off control of lights and remotely responds to "All Lights Off", "All Lights Off", unit On/Off and unit Dim/Brighten commands from any X10 controller or X10 software. A slide switch is located under the push button to disconnect the circuit so light bulbs may be changed without accidental remote operation of the light fixture. X10 house codes and unit code settings are easily accessible on the main WS467 switch.
The Ws467 is rated at 120VAC/60Hz. 500W (incandescent only). 40 Watts minimum. Not recommended for use with Fluorescent or Low Voltage Lighting.
The X10 WS467 and X10Pro PLW021 are identical parts and can be used interchangeably.
X10 WS467 Dimming Toggle Push Button Switch Specifications:
• Color: White
• Incandescent Lighting Only Use
• On/Off Pushbutton Toggle Switch
• X10 Control Capable
• Remotely Responds to X10: "All Lights Off", "All Lights Off", On/Off, Dim/Brighten
• 120VAC - 500W 4Amp Max
• Fits Std. Switch Box and Wall Plate - Depth Required - 1.17"
• Easy Access X10 Code Switches
• 1yr Warranty
Stocked as X10 WS467 but is the same as the X10 Pro PLW01
View the X10 Cross Reference List
View the X10 WS467 Back Image
View the X10 WS467 Manual PDF
View our X10 FAQ and Downloads Page
WS467
|
|
|
Shipping Included on Orders of $25 or More
| X10 UM506 Wall-Plug Universal Contact Closure Module
|
|
The X10 UM506 and X10 Pro PUM01 are wall plug modules used to control a contact closure. This contact closure device can trigger an event by closing contact and completing a circuit. If you are keen enough you can use this device to press a button on a remote that does not have learnable codes like RF remotes. The contact can also be used to pass 24VDC up to 5 amps to gain control of a low voltage device like a horn for an alarm or sprinkler system. The contact of the UM506 may be used in a momentary or sustained contact closure. The UM506 also features a built-in chime so signal activation that can be turned on or off.
X10 UM506 Contact Closure Module Specifications:
• Wall-Plug Use - With Manual Switch
• Wide Variety of Loads
• Provides Contact Closure
• Momentary or Sustained Contact
• Unit On/Off, All Off Capable
• X10 Control Capable
• Contact Rating - 24VDC - 5Amp Max
• Dimensions: 2.2" W x 3.58" H x 1.75" D
• 1yr Warranty
Stocked as UM506 but is the same as the X10 Pro PUM01
View the X10 Cross Reference List
View the X10 UM506 Manual PDF
View our X10 FAQ and Downloads Page
UM506
|
|
|
|