Shipping Included on Orders of $25 or More
| X10 ActiveHome Pro CM15A w/Computer Control Software Bundle
|
|
X10 ActiveHome Pro SW31A / CM15A Overview
With the CM15A USB PC interface you can now control your household electronics with the ActiveHome Pro Software. How you control your home is up to you! Never want to touch another switch? With the X10 ActiveHome Pro's PC home automation, you won't have to! You can create customized home automation routines according to your schedule, so you can wake up to dimmed lights and soft music, come home after work to a brightly lit house, and go to the bed without thinking about turning off all your lights – they'll just turn right off for you. You can even create customized macros to control your more complex systems.
The NEW ActiveHome Pro USB computer interface (CM15A) is ready for future enhancements as well. This Tiny White Box will have you monitoring your home surveillance cameras, controlling your home via the web, and more. The CM15A features built in memory and a battery backup inside the USB Computer Interface allows timers to operate with your computer turned off. The CM15A also sends and receives X10 communication via RF and down the powerline reducing the number of components you used to need for computer controlled home automation. You can use exclusive RF macros to control modules that are tricky to control directly from the CM15A (Requires an X10 RF Receiver)
X10 as an originator of powerline communication systems also has compatibility with many other companies including built-in modules for the Leviton DHCTM line of controllers. Pretty much if it has the ability for you to set a house code and number address either mechanically or electronically it should compatible. View the X10 MFG compatibility list.
X10 ActiveHome Pro SW31A and CM15A Specifications:
• Send and Receive RF X10 Powerline Communications
• Send and Receive Powerline Communications
• Supports 256 House/Unit Codes
• USB Computer Interface
• Works with Computer Off w/ Battery Back-Up
• Battery Back Up - Requires 4-AAA Batteries not Included
• Programmable Software Interface - Timers, Macros Etc.
• The software monitors battery life so you won't have unexpected down times.
• The software monitors other computers and modules for used codes
• Computer Requirements - PC Running any Windows OS and USB Port
• CM15A Dimensions: 4.9"H x 3.5"W x 1.5" D
• 1yr Warranty
• What's included: CM15A, USB Cable, ActiveHome Pro Software SW31A
Other Software Also included at this time:
SW39A - OnAlert Security Plug-In
Allow Security devices to control ActiveHome Pro and or Send Emails
SW34A - MyHouse Web Control/Monitoring Plug-In
Control ActiveHome Pro Remotely thru the internet
SW33A - IWatchOut Video Control Plug-In
Control, Record, View, Video Cameras,
SW32A - Smart Macro Plug-In
Create conditional Macros using "and", "or", "else" Logic
Note: A Link will be provided to download the software when your hardware has shipped.
View the CM15A Bottom Image
View the CM15A Back Image
View the X10 ActiveHome Pro SW31A / CM15A Manual PDF
View our X10 FAQ and Downloads Page
CM15A
|
|
Shipping Included on Orders of $25 or More
| X10 / X10Pro UR74A / PUR09 Learning IR / RF Remote Control
|
|
The X10 UR74A and the X10 Pro PUR09 are Universal 5-in-1 Learning Remote controls for your X10 lights and appliances as well as TV, DVD, VCR Cable Satellite Etc. These remotes can communicate X10 Powerline commands via IR, RF or both at the same time. Reception of X10 IR commands requires the X10 IR543 to convert the IR signal into a powerline command. Reception of X10 RF commands requires a compatible RF Transceiver like the X10 CM15A or TM751 to convert the RF signal into a powerline command.
The X10 UR74A remote can be set to any house code (typically only one house code is used per remote). When you want to control an X10 compatible device simply press the X10 button, then the unit code (1 thru 16) and the appropriate command - On, Off, Bright, Dim, All Lamps On or All Modules Off. It really is that simple.
The X10 Remote also comes with codes for the following types of equipment. Traditional TV, Plasma TV, LCD TV, HDTV Tuners, VCR, CD Players, AV Receivers, Cable Boxes, Satellite Tuners, DVD Players, DVR, DVD Recorders, Laser Discs, TV/VCR Combos, DVR/Sat Combos, DVD/VCR Combos, DVR Cable Combos, DVR/DVD Combos and HTIB.
The X10UR74A / PUR09 remote also has advanced features like Punch Thru keys that allow you control certain devices like volume control of the AV receiver while you are in the TV Tuner mode. This prevents the need for repetitive button pressing.
X10 UR74A RF/IR Learning Remote Control Specifications:
• Sends RF X10 Powerline Commands (CM15A or T751 Required for reception)
• Sends IR Powerline Commands (IR543 Required for X10 Reception)
• Can control typical AV electronics with IR codes
• Can control many devices with built-in codes
• Learning Capability for codes not built-in
• Requires 4-AAA Batteries not Included
• Dimensions: 7 3/8"L x 2.25"W x 0.975" D
• 1yr Warranty
Stocked as UR74A but is the same as the X10Pro PUR09
View the X10 Cross Reference List
View the X10 UR74A Manual
View the X10 UR74A Code List
View our X10 FAQ and Downloads Page
UR74A
|
|
|
Shipping Included on Orders of $25 or More
| X10 KR19A Slimfire RF Remote Control
|
|
The X10 KR19A remote controls On/Off, Bright and Dim commands for 1 customer set house code and 2 sequential devices. The X10 KR19 remote control communicates X10 Powerline commands via RF. Reception of X10 RF comands requires a compatible RF Transceiver like the X10 CM15A or TM751 to convert the RF signal into a powerline command.
X10 KR19A Keychain RF Remote Control Specifications:
• Sends RF X10 Powerline Commands (CM15A or T751 Required for reception)
• Controls On/Off and Bright/dim Commands for 2 Sequential Devices
• Lihium Coin Cell Battery Included
• Dimensions: 2.5" H x 1.5" W x 7/16" Thick
• 1yr Warranty
View the X10 KR19A Manual
View our X10 FAQ and Downloads Page
KR19A
|
|
|
Shipping Included on Orders of $25 or More
| X10 IR543 - Plug-In Controller w/ IR Interface
|
|
The X10 IR543 is a manual plug-in controller for X10 automation modules and switches. The IR543 allows IR commands to be received sent from X10 compatible remote controls like the X10 UR74A . The IR543 then converts those IR commands into powerline commands. This is the only interface from X10 that will convert IR to a powerline signal and is an essential item for those wishing to automate their Home Theater lighting with their advanced IR Remotes.
The IR543 provides control of up to 8 unit number codes and all 16 house codes manually. With an IR remote you have full access to the 16 unit number codes as well as all 16 house codes. The IR543 provides the following push button commands: All Lights On, All Units Off, On, Off, Bright and Dim.
X10 IR543 Manual Plug-in Controller w/IR Interface:
• 16 Channel house Code Selection
• 8 Channel Push Button Unit Code Selection
• Receives and Converts IR signals to X10 Powerline Commands
• LED Feedback for reception of commands
• Std. 2 Prong Plug
• Dimensions: 4.55"W x 3.7"D x 1.08" H
• 1yr Warranty
View the X10 IR543 Manual
View our X10 FAQ and Downloads Page
IR543
|
|
|
Shipping Included on Orders of $25 or More
| X10 / X10 Pro SS13A / PHW04D Slim Line Wireless Wall Switch
|
|
The X10 Slim Line SS13A is a wireless wall switch used to control virtually any X10 device, module, switch etc.
Have you ever wanted a light switch in a certain location, but didn't want to rip a hole in a wall and connect electrical wires? This super sleek, super thin and light weight, wireless remote wall switch adheres to any surface! Easy single push-button programming has your Stick-a-Switch set for each button to control a different lamp or appliance! Now you have the dream switch you always wanted, in the perfect location!
Micro thin! Only 7 millimeters!! Completely indistinguishable from an ordinary wall plate! Single push-button programmability! 3 on/off buttons PLUS 4th button dimmer control! Adheres to any surface! Mount it anywhere to have the perfect wall switch right where you've always wanted -- no wiring! Or use it as a portable 4-button wireless remote! Fits comfortably in the palm of your hand; slim and sleek, it glides effortlessly into your pocket for control on the go!
X10 SS13A Slim Line Wireless Wall Switch / Controller Specifications:
• Wireless RF Wall Switch Controller
• Controls virtually any X10 Device, Module, switch Etc.
• 3 Button On/Off plus Dim Brighten
• Can be set to any House code
• Controls 3 Sequential House Code Programmable
• Battery Operated - CR2032 Lithium 3V Battery Included
• Changeable Button Labels - Preprinted Labels Supplied
• Adheres to wall via double stick tape.
• Dimensions: 2.75" W x 4.5" H x 0.276" Thk
• 1yr Warranty
Stocked as the X10 SS13A but is the same as the X10Pro PHW04D
View the X10 Cross Reference List
An X10 RF Transceiver like the CM15A is required to receive the RF signal, convert it to a power line X10 communication and send the signal down the household wiring.
View the X10 Slim Line SS13A Manual PDF
View our X10 FAQ and Downloads Page
SS13A
|
|
|
Shipping Included on Orders of $25 or More
| X10 MT12A Mini Table Top Timer and Alarm Clock
|
|
X10 MT12A Overview
The XI0 MT12A Mini Timer controls up to 8 X10 Modules automatically or instantly. You can have your outside lights as well as inside lights and appliances go on and off at preset times to give your home a lived-in look while you are away.
You can program your Modules to go on and off at the same time every day or you can set your radio to wake you up "Once" only, for an early morning flight. There is even a '"Security" Mode that automatically varies your programmed time each day so your home doesn't look like it's controlled by a timer.
You can keep the Mini Timer by your bedside and it will wake you up on weekdays. The MT12A has a snooze feature so you can sleep a while longer and you can turn the alarm off on weekends.
You can manually turn off your child's radio or night light from your bedside. You can turn on ALL lights connected to Lamp Modules and Wall Switch Modules with the touch of a button if you hear a suspicious noise at night. You can even turn off everything in the system with one button.
The Mini Timer plugs into any AC outlet in your home and you set it like a digital alarm clock. Channel number 1 also activates an internal buzzer so you can us it as an alarm clock too! You can program up to 8 XI0 Modules from the Mini Timer and you also have instant control of 8 Modules.
X10 MT12A Mini Timer Specifications:
• Programmable Alarm Clock and Timer
• Controls upto 8 Devices on the Same House Code
• Timed events run the same time everday - not 7 Day Programmable
• Mutliple On/Off sequences can be programmed for the same device on the same day
• Programmable - Run Once Feature - that erases itself after 24hrs
• Security Mode for random operation while on Vacation
• Wall Plug Power Supply Included
• Sends On/Off Commands and ALL On / All Off
• Works with any X10 Module that responds to Powerline X10 On/Off Commands
• Programmable for only 1 House Code and 8 devices
• Battery Back-up with 2 AA Batteries - Not Included
• MT12A Dimensions: 3.25"H x 4.625"W x 2" D
• 1yr Warranty
The MT12A is the same as the X10 Pro XPMT1
For our Somfy RTS Shade Automations Customers: This unit in conjunction with the UM506 provides a simple, effective low cost automation. The Somfy remotes can be wired to the UM506 so that the UM506 acts like a finger pressing the buttons.
View the MT12A Top Image
View the X10 Pro MT12A Manual PDF
View our X10 FAQ and Downloads Page
MT12A
|
|
|
Shipping Included on Orders of $25 or More
| X10 XPT Wire In Base Controller for XP Keypads
|
|
The X10 Pro XPT Base Controller is a wall mounted wire in controller capable of transmitting from a standard, single gang wall box having HOT and NEUTRAL. There are seven possible X10 Pro KEYPADS to choose from, allowing multiple control solutions from various locations. The XPT controller is a transmitter used to control X10 devices, outlets, modules, wall switch modules etc. Using the variety of keypads the user is able to attain the combination of X10 control needed at that time with the ability to change just the keypad in the future for expanded or reduced control.
X10 Pro XPT Base Controller Specifications:
• In-Wall Base Controller
• Fits in Std. Single Gang Utility Box
• 120VAC Operation
• Requires Hot and Neutral Connection
• See the various XP Keypads for Control Possibilities
• Dimensions: 2.735H" L x 1.725" W x 1.54" D (Not Including Mounting Tabs)
• 1yr Warranty
View the XP Keypad Variations PDF
View the X10 PRO XPT Manual PDF
View our X10 FAQ and Downloads Page
XPT
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro XP1-W Keypad for XPT Base Controller
|
|
The X10 Pro XP1-W Keypad is designed to operate when attached to an X10 Pro XPT Wall Controller. The XP1-W is a white decorator style keypad that has one rocker button used to send On and Off commands to the same house code as the XPT Base.
The X10 Pro XP series keypads can be used to create 3 way lighting circuits when used in conjunction with the X10 / X10 PRO Switch / Dimming Switch Modules like the WS12A, WS13A, XPDI3
X10 Pro XP1-W XPT Keypad Specifications:
• For Use with X10 Pro XPT Base Controller
• Decorator Style
• Color: White
• Provides On/Off X10 Control Commands
• White Trim Plate - Not Included See Options
• Dimensions: 2.58 H" L x 1.27" W x 0.48" D
• 1yr Warranty
View the X10 Pro XP1-W Keypad Back
View the X10 Pro XP1-W Manual PDF
View our X10 FAQ and Downloads Page
XP1-W
|
 | |
| |
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro XP1A-W Keypad for XPT Base Controller
|
|
The X10 Pro XP1A-W Keypad is designed to operate when attached to an X10 Pro XPT Wall Controller. The XP1A-W is a white decorator style keypad that has one rocker button used to send All On and All Off commands to the same house code as the XPT Base.
X10 Pro XP1A-W XPT Keypad Specifications:
• For Use with X10 Pro XPT Base Controller
• Decorator Style
• Color: White
• Provides All On / All Off X10 Control Commands
• White Trim Plate - Not Included See Options
• Dimensions: 2.58 H" L x 1.27" W x 0.48" D
• 1yr Warranty
View the X10 Pro XP1A-W Keypad Back
View the X10 Pro XP1A-W Manual PDF
View our X10 FAQ and Downloads Page
XP1A-W
|
| |
| |
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro XP2-W Keypad for XPT Base Controller
|
|
The X10 Pro XP2-W Keypad is designed to operate when attached to an X10 Pro XPT Wall Controller. The XP2-W is a white decorator style keypad that has two rocker buttons used to send sequential ON/OFF X-10 PRO commands. The first command (Top Rocker) is the same Unit Code set on the XPT Base Transmitter and the second rocker would control the next sequential X10 unit code. For Instance: If the XPT base controller is set to House Code A and Unit Code is set to 1 than the XP2 Top rocker switch would control A-1 and the second Rocker switch would control A-2.
The X10 Pro XP series keypads can be used to create 3 way lighting circuits when used in conjunction with the X10 / X10 PRO Switch / Dimming Switch Modules like the WS12A, WS13A, XPDI3
X10 Pro XP2-W XPT Keypad Specifications:
• For Use with X10 Pro XPT Base Controller
• Decorator Style
• Color: White
• Provides 2 Sequential On/Off X10 Control Commands
• White Trim Plate - Not Included See Options
• Dimensions: 2.58 H" L x 1.27" W x 0.48" D
• 1yr Warranty
View the X10 Pro XP2-W Keypad Back
View the X10 Pro XP2-W Manual PDF
View our X10 FAQ and Downloads Page
XP2-W
|
| |
| |
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro XP2D-W Keypad for XPT Base Controller
|
|
The X10 Pro XP2D-W Keypad is designed to operate when attached to an X10 Pro XPT Wall Controller. The XP2D-W is a white decorator style keypad that has two rocker buttons used to send ON/OFF commands and a BRIGHTEN/DIM for the same device code, such as a module with dimming capabilities.
The X10 Pro XP series keypads can be used to create 3 way lighting circuits when used in conjunction with the X10 / X10 PRO Switch / Dimming Switch Modules like the WS12A, WS13A, XPDI3
X10 Pro XP2D-W XPT Keypad Specifications:
• For Use with X10 Pro XPT Base Controller
• Decorator Style
• Color: White
• Provides On/Off, Brighten/Dim Commands for a single X10 Code
• White Trim Plate - Not Included See Options
• Dimensions: 2.58 H" L x 1.27" W x 0.48" D
• 1yr Warranty
View the X10 Pro XP2D-W Keypad Back
View the X10 Pro XP2D-W Manual PDF
View our X10 FAQ and Downloads Page
XP2D-W
|
| |
| |
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro XP4-W Keypad for XPT Base Controller
|
|
The X10 Pro XP4-W Keypad is designed to operate when attached to an X10 Pro XPT Wall Controller. The XP4-W is a white decorator style keypad that has four rocker buttons used to send sequential ON/OFF X-10 PRO commands. The first command (Top Rocker) is the same Unit Code set on the XPT Base Transmitter and the lower rockers would control the next sequential X10 unit codes. For Instance: If the XPT base controller is set to House Code A and Unit Code is set to 1 than the XP4 Top rocker switch would control A-1 and the lower Rocker switches would control A-2, A-3, A-4
The X10 Pro XP series keypads can be used to create 3 way lighting circuits when used in conjunction with the X10 / X10 PRO Switch / Dimming Switch Modules like the WS12A, WS13A, XPDI3
X10 Pro XP4-W XPT Keypad Specifications:
• For Use with X10 Pro XPT Base Controller
• Decorator Style
• Color: White
• Provides 4 Sequential On/Off X10 Control Commands
• White Trim Plate - Not Included See Options
• Dimensions: 2.58 H" L x 1.27" W x 0.48" D
• 1yr Warranty
View the X10 Pro XP4-W Keypad Back
View the X10 Pro XP4-W Manual PDF
View our X10 FAQ and Downloads Page
XP4-W
|
| |
| |
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro XP4D-W Keypad for XPT Base Controller
|
|
The X10 Pro XP4D-W Keypad is designed to operate when attached to an X10 Pro XPT Wall Controller. The XP4D-W is a white decorator style keypad that has four rocker buttons used to send 3 sequential ON/OFF X-10 PRO commands plus Brighten/Dim commands for the last button selected. The first command (Top Rocker) is the same Unit Code set on the XPT Base Transmitter and the 2 rockers would control the next sequential X10 unit codes. The bottom rocker provides X10 Bright/Dim commands for the last button pressed. For Instance: If the XPT base controller is set to House Code A and Unit Code is set to 1 than the XP4D Top rocker switch would control A-1 and the lower 2 Rocker switches would control A-2, A-3 while the bottom rocker would provide Dim/Brighten Commands for A-1, A-2, A-3.
The X10 Pro XP series keypads can be used to create 3 way lighting circuits when used in conjunction with the X10 / X10 PRO Switch / Dimming Switch Modules like the WS12A, WS13A, XPDI3
X10 Pro XP4D-W XPT Keypad Specifications:
• For Use with X10 Pro XPT Base Controller
• Decorator Style
• Color: White
• Provides 3 Sequential On/Off and Brighten / Dim X10 Control Commands
• White Trim Plate - Not Included See Options
• Dimensions: 2.58 H" L x 1.27" W x 0.48" D
• 1yr Warranty
View the X10 Pro XP4D-W Keypad Back
View the X10 Pro XP4D-W Manual PDF
View our X10 FAQ and Downloads Page
XP4D-W
|
| |
| |
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro XP4A-W Keypad for XPT Base Controller
|
|
The X10 Pro XP4A-W Keypad is designed to operate when attached to an X10 Pro XPT Wall Controller. The XP4A-W is a white decorator style keypad that has four rocker buttons used to send 3 sequential ON/OFF X-10 PRO commands plus All On / All Off commands for the house code set on the XPT Base. The first command (Top Rocker) is the same Unit Code set on the XPT Base Transmitter and the 2 rockers would control the next sequential X10 unit codes. The bottom rocker provides X10 All On / All Off commands for the code set on the XPT Base. For Instance: If the XPT base controller is set to House Code A and Unit Code is set to 1 than the XP4A Top rocker switch would control A-1 and the lower 2 Rocker switches would control A-2, A-3 while the bottom rocker would provide All On / All Off for house code A.
The X10 Pro XP series keypads can be used to create 3 way lighting circuits when used in conjunction with the X10 / X10 PRO Switch / Dimming Switch Modules like the WS12A, WS13A, XPDI3
X10 Pro XP4A-W XPT Keypad Specifications:
• For Use with X10 Pro XPT Base Controller
• Decorator Style
• Color: White
• Provides 3 Sequential On/Off and All On/All Off X10 Control Commands
• White Trim Plate - Not Included See Options
• Dimensions: 2.58 H" L x 1.27" W x 0.48" D
• 1yr Warranty
View the X10 Pro XP4A-W Keypad Back
View the X10 Pro XP4A-W Manual PDF
View our X10 FAQ and Downloads Page
XP4A-W
|
| |
| |
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro XPT1 - XPT Base and XP1 KeyPad
|
|
The X10 Pro XPT1 is a wall mounted wire in controller capable of transmitting from a standard, single gang wall box having HOT and NEUTRAL. This package includes the XPT base controller and the XP1 keypad. The XPT1 is a white decorator style controller that has one rocker button used to send On and Off commands to the same house code as the XPT Base. The XPT1 controller is a transmitter used to control X10 devices, outlets, modules, wall switch modules etc.
The XPT1 utilizes the XP1 keypad but there are 6 other possible X10 Pro KEYPADS to choose from should the need to change the keypad arises for reconfiguration of the XPT controller. , allowing multiple control solutions from various locations. T
The X10 Pro XPT1 series keypads can be used to create 3 way lighting circuits when used in conjunction with the X10 / X10 PRO Switch / Dimming Switch Modules like the WS12A, WS13A, XPDI3
X10 Pro XPT1-W Controller Specifications:
• XP1 Keypad with XPT Base Controller
• Decorator Style
• Color: White
• Provides On/Off X10 Control Commands
• Fits in Std. Single Gang Utility Box
• 120VAC Operation
• Requires Hot and Neutral Connection
• White Trim Plate - Not Included See Options
• XP1D Keypad Dimensions: 2.58 H" L x 1.27" W x 0.48" D
• XPT Base Dimensions: 2.735H" L x 1.725" W x 1.54" D (Not Including Mounting Tabs)
• 1yr Warranty
View the X10 Pro XP1-W Keypad Back
View the X10 Pro XPT Base Controller without the XP1 Keypad
View the X10 PRO XPT Manual PDF
View the X10 Pro XP1-W Manual PDF
View our X10 FAQ and Downloads Page
XPT1
|
| |
| |
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro XPT2D - XPT Base and XP2D KeyPad
|
|
The X10 Pro XPT2D is a wall mounted wire in controller capable of transmitting from a standard, single gang wall box having HOT and NEUTRAL. This package includes the XPT base controller and the XP2D keypad. The XPT2D is a white decorator style controller that has two rocker buttons used to send ON/OFF commands and a BRIGHTEN / DIM button for the same device code, such as a module with dimming capabilities. The XPT2D controller is a transmitter used to control X10 devices, outlets, modules, wall switch modules etc.
The XPT2D utilizes the XP2D keypad but there are 6 other possible X10 Pro KEYPADS to choose from should the need to change the keypad arises for reconfiguration of the XPT controller. , allowing multiple control solutions from various locations. T
The X10 Pro XPT2D series keypads can be used to create 3 way lighting circuits when used in conjunction with the X10 / X10 PRO Switch / Dimming Switch Modules like the WS12A, WS13A, XPDI3
X10 Pro XPT2D-W Controller Specifications:
• XP2D Keypad with XPT Base Controller
• Decorator Style
• Color: White
• Provides On/Off, Brighten/Dim Commands for a single X10 Code
• Fits in Std. Single Gang Utility Box
• 120VAC Operation
• Requires Hot and Neutral Connection
• White Trim Plate - Not Included See Options
• XP2D Keypad Dimensions: 2.58 H" L x 1.27" W x 0.48" D
| |