---

Shipping Policy

Request Info / Quote

Furez Products FZ162AA 16AWG In-Wall Audio / Subwoofer Cable - Per Foot

ft

The Furez Products in-wall subwoofer and analog audio cables are designed with the discerning audio enthusiasts in mind. The FZ162AA cable is used in both the Furez in-wall subwoofer (FZ162SUB) and analog audio (FZ162AA) cables utilizes a combination of large 16AWG 99.997% OFHC C10100 Copper conductors for minimal signal loss and foamed polyethylene (FPE) conductor insulation for low capacitance. The FZ162AA cable internally incorporates a twisted pair configuration with a 95% tinned copper braid and 100% Aluminum Polyester Foil wrap to maximize protection against unwanted noise infiltration.     Furez Products has addressed some of the issues typically found with in-wall subwoofer and audio cables. Furez Products has designed this analog audio cable with flexibility and longevity in mind. High flexibility is achieved by using a softer PVC jacket in combination with a high strand count conductor. The conductor insulation thickness has been increased to protect the inner conductors from oxidation. A non-oxidizing tinned copper braided shield is utilized to further ensure longevity of the cable since the shielding of a cable is more susceptible to oxidation due to its proximity to the outer edge of the cable. About Furez Products   Furez FZ162AA 16AWG CL3 In-Wall Analog Audio / Subwoofer Cable     •    16AWG Analog Audio Cable / Subwoofer Cable     •    UL CL3 In-Wall Rated Analog Audio Cable     •    Color: Dark Blue     •    Extremely Flexible: Well suited for In-Wall and Standard Analog Audio Cable Uses     •    103 Strand (Per Conductor) - 99.997% OFHC C10100 Copper Conductors     •    2 Conductor Plus Double Shielded Construction     •    Internally Twisted Conductors with Molded Round Outer Jacket     •    Double Shielded Construction             -    95% Tinned Copper Braid Shield (136 Strands of 36AWG = App. 15AWG)             -    100% Aluminum Polyester Foil Shield     •    See FZ162AA In-Wall Analog Audio Cable Construction Detail     •    DC Resistance: 4.01 Ohm/1000'     •    DC Resistance Shield/Conductor: 2.09 Ohm/1000'     •    Rac @ 1KHz: 8.40mOhm/ft     •    Rac @ 1KHz: 6.34mOhm/ft (w/ Shield & Negative Conductor)     •    Capacitance @ 1KHz: 20.86 pF/ft     •    Capacitance @ 1KHz: 39.56 pF/ft (w/ Shield & Negative Conductor)     •    Inductance @ 1KHz: 0.201 uH/ft     •    Inductance @ 1KHz: 0.126 uH/ft (w/ Shield & Negative Conductor)     •    0.032" (0.810mm) Thick PVC Outer Jacket     •    0.0275" (0.70mm) Foamed Polyethylene (FPE) Insulation     •    Nominal Outer Cable Diameter - 0.295” (7.493mm)     •    Weight: 0.066 lb per Foot     •    Sold Per Foot - Specify Quantity as # of Feet Stocked in 500' Spools Note: This is not a Siamese cable. You will need to order 10' to make a 5' analog audio cable pair. Request A Sample   Go Back to Our Main Audio Cable Index Page View Locking RCA Connectors - Audio View Our Main AV-Cable Page FZ162AA-C

Larger FZ162AA Image

 

---

Shipping Policy

Request Info / Quote

Furez Products FZ162AA 16AWG In-Wall Audio / Subwoofer - 250' Spool

The Furez Products in-wall subwoofer and analog audio cables are designed with the discerning audio enthusiasts in mind. The FZ162AA cable is used in both the Furez in-wall subwoofer (FZ162SUB) and analog audio (FZ162AA) cables utilizes a combination of large 16AWG 99.997% OFHC C10100 Copper conductors for minimal signal loss and foamed polyethylene (FPE) conductor insulation for low capacitance. The FZ162AA cable internally incorporates a twisted pair configuration with a 95% tinned copper braid and 100% Aluminum Polyester Foil wrap to maximize protection against unwanted noise infiltration.     Furez Products has addressed some of the issues typically found with in-wall subwoofer and audio cables. Furez Products has designed this analog audio cable with flexibility and longevity in mind. High flexibility is achieved by using a softer PVC jacket in combination with a high strand count conductor. The conductor insulation thickness has been increased to protect the inner conductors from oxidation. A non-oxidizing tinned copper braided shield is utilized to further ensure longevity of the cable since the shielding of a cable is more susceptible to oxidation due to its proximity to the outer edge of the cable. About Furez Products   Furez FZ162AA 16AWG CL3 In-Wall Analog Audio / Subwoofer Cable     •    16AWG Analog Audio Cable / Subwoofer Cable     •    UL CL3 In-Wall Rated Analog Audio Cable     •    Color: Dark Blue     •    Extremely Flexible: Well suited for In-Wall and Standard Analog Audio Cable Uses     •    103 Strand (Per Conductor) - 99.997% OFHC C10100 Copper Conductors     •    2 Conductor Plus Double Shielded Construction     •    Internally Twisted Conductors with Molded Round Outer Jacket     •    Double Shielded Construction             -    95% Tinned Copper Braid Shield (136 Strands of 36AWG = App. 15AWG)             -    100% Aluminum Polyester Foil Shield     •    See FZ162AA In-Wall Analog Audio Cable Construction Detail     •    DC Resistance: 4.01 Ohm/1000'     •    DC Resistance Shield/Conductor: 2.09 Ohm/1000'     •    Rac @ 1KHz: 8.40mOhm/ft     •    Rac @ 1KHz: 6.34mOhm/ft (w/ Shield & Negative Conductor)     •    Capacitance @ 1KHz: 20.86 pF/ft     •    Capacitance @ 1KHz: 39.56 pF/ft (w/ Shield & Negative Conductor)     •    Inductance @ 1KHz: 0.201 uH/ft     •    Inductance @ 1KHz: 0.126 uH/ft (w/ Shield & Negative Conductor)     •    0.032" (0.810mm) Thick PVC Outer Jacket     •    0.0275" (0.70mm) Foamed Polyethylene (FPE) Insulation     •    Nominal Outer Cable Diameter - 0.295” (7.493mm)     •    Weight: 16.5lb per 250' Spool     •    Sold Per 250' Spool Stocked in 500' Spools Note: This is not a Siamese cable. You will need to order 10' to make a 5' analog audio cable pair. Request A Sample   Go Back to Our Main Audio Cable Index Page View Locking RCA Connectors - Audio View Our Main AV-Cable Page FZ162AA-250

Larger FZ162AA Image

 

---

Shipping Policy

Request Info / Quote

Furez Products FZ162AA 16AWG In-Wall Audio / Subwoofer - 500' Spool

The Furez Products in-wall subwoofer and analog audio cables are designed with the discerning audio enthusiasts in mind. The FZ162AA cable is used in both the Furez in-wall subwoofer (FZ162SUB) and analog audio (FZ162AA) cables utilizes a combination of large 16AWG 99.997% OFHC C10100 Copper conductors for minimal signal loss and foamed polyethylene (FPE) conductor insulation for low capacitance. The FZ162AA cable internally incorporates a twisted pair configuration with a 95% tinned copper braid and 100% Aluminum Polyester Foil wrap to maximize protection against unwanted noise infiltration.     Furez Products has addressed some of the issues typically found with in-wall subwoofer and audio cables. Furez Products has designed this analog audio cable with flexibility and longevity in mind. High flexibility is achieved by using a softer PVC jacket in combination with a high strand count conductor. The conductor insulation thickness has been increased to protect the inner conductors from oxidation. A non-oxidizing tinned copper braided shield is utilized to further ensure longevity of the cable since the shielding of a cable is more susceptible to oxidation due to its proximity to the outer edge of the cable. About Furez Products   Furez FZ162AA 16AWG CL3 In-Wall Analog Audio / Subwoofer Cable     •    16AWG Analog Audio Cable / Subwoofer Cable     •    UL CL3 In-Wall Rated Analog Audio Cable     •    Color: Dark Blue     •    Extremely Flexible: Well suited for In-Wall and Standard Analog Audio Cable Uses     •    103 Strand (Per Conductor) - 99.997% OFHC C10100 Copper Conductors     •    2 Conductor Plus Double Shielded Construction     •    Internally Twisted Conductors with Molded Round Outer Jacket     •    Double Shielded Construction             -    95% Tinned Copper Braid Shield (136 Strands of 36AWG = App. 15AWG)             -    100% Aluminum Polyester Foil Shield     •    See FZ162AA In-Wall Analog Audio Cable Construction Detail     •    DC Resistance: 4.01 Ohm/1000'     •    DC Resistance Shield/Conductor: 2.09 Ohm/1000'     •    Rac @ 1KHz: 8.40mOhm/ft     •    Rac @ 1KHz: 6.34mOhm/ft (w/ Shield & Negative Conductor)     •    Capacitance @ 1KHz: 20.86 pF/ft     •    Capacitance @ 1KHz: 39.56 pF/ft (w/ Shield & Negative Conductor)     •    Inductance @ 1KHz: 0.201 uH/ft     •    Inductance @ 1KHz: 0.126 uH/ft (w/ Shield & Negative Conductor)     •    0.032" (0.810mm) Thick PVC Outer Jacket     •    0.0275" (0.70mm) Foamed Polyethylene (FPE) Insulation     •    Nominal Outer Cable Diameter - 0.295” (7.493mm)     •    Weight: 33 lb per 500' Spool     •    Sold Per 500' Spool - Specify Quantity as # of Feet Stocked in 500' Spools Note: This is not a Siamese cable. You will need to order 10' to make a 5' analog audio cable pair. Request A Sample   Go Back to Our Main Audio Cable Index Page View Locking RCA Connectors - Audio View Our Main AV-Cable Page FZ162AA-500

Larger FZ162AA Image

 

---