---

Shipping Policy

Request Info / Quote

ViaBlue NF-B Subwoofer Cable - Per Foot

ft

ViaBlue NF-B subwoofer interconnects are specially designed LF cables which play the bass range with full acoustic power and pressure. The capacitance between inner conductor and screen is maximized by a very thick inner conductor. LDPE thermoplastic is used as insulation, thus increasing the capacitance even further for the same dimensions. This results in capacitive values of 128 pF/m. Because the signal transfer focuses on the bass range, it receives maximum boost so that the signal power is not degraded even over longer signal paths. Consequently, the subwoofers can be positioned to make the most of the room acoustics. The extremely thick inner conductor of the LFB subwoofer interconnect creates a high acoustic pressure for subwoofers. The triple shield constructed from a double, reverse spiral wound sheath and the LDPE semi-conducting layer shields the massive inner conductor. The built-in sheath current filter drains the inner/intermediate currents which occur with coaxial cables from the conductor and shielding.   ViaBlue NF-B Subwoofer Cable Specifications: ·          Color: Black ·          Thick Inner Conductor app. 14AWG ·          Conductor Insulation: LDPE ·          High Strand Inner Conductor – app. 550 Strands ·          3 Layers of Shielding o         1 Layer Tinned Copper Wound o         1 Layer Reverse Copper Wound o         1 Layer Black Semi-Conducting LDPE sheath ·          Overall Diameter of Cable 0.290” ·          DC Resistance: 2.49 Ohm / 1000' ·          Sold Per Foot - Specify Quantity as # of Feet Stocked in 330' Spools View the ViaBlue NF-B Subwoofer Cable Construction   The ViaBlue Products  www.ViaBlue.de in Germany Go Back to Our Main Audio Cable Index Page View Locking RCA Connectors - Audio View Our Main AV-Cable Page NF-B-Foot

Larger NF-B Image

 

---

Shipping Policy

Request Info / Quote

Furez Products FZ162AA 16AWG In-Wall Audio / Subwoofer Cable - Per Foot

ft

The Furez Products in-wall subwoofer and analog audio cables are designed with the discerning audio enthusiasts in mind. The FZ162AA cable is used in both the Furez in-wall subwoofer (FZ162SUB) and analog audio (FZ162AA) cables utilizes a combination of large 16AWG 99.997% OFHC C10100 Copper conductors for minimal signal loss and foamed polyethylene (FPE) conductor insulation for low capacitance. The FZ162AA cable internally incorporates a twisted pair configuration with a 95% tinned copper braid and 100% Aluminum Polyester Foil wrap to maximize protection against unwanted noise infiltration.     Furez Products has addressed some of the issues typically found with in-wall subwoofer and audio cables. Furez Products has designed this analog audio cable with flexibility and longevity in mind. High flexibility is achieved by using a softer PVC jacket in combination with a high strand count conductor. The conductor insulation thickness has been increased to protect the inner conductors from oxidation. A non-oxidizing tinned copper braided shield is utilized to further ensure longevity of the cable since the shielding of a cable is more susceptible to oxidation due to its proximity to the outer edge of the cable. About Furez Products   Furez FZ162AA 16AWG CL3 In-Wall Analog Audio / Subwoofer Cable     •    16AWG Analog Audio Cable / Subwoofer Cable     •    UL CL3 In-Wall Rated Analog Audio Cable     •    Color: Dark Blue     •    Extremely Flexible: Well suited for In-Wall and Standard Analog Audio Cable Uses     •    103 Strand (Per Conductor) - 99.997% OFHC C10100 Copper Conductors     •    2 Conductor Plus Double Shielded Construction     •    Internally Twisted Conductors with Molded Round Outer Jacket     •    Double Shielded Construction             -    95% Tinned Copper Braid Shield (136 Strands of 36AWG = App. 15AWG)             -    100% Aluminum Polyester Foil Shield     •    See FZ162AA In-Wall Analog Audio Cable Construction Detail     •    DC Resistance: 4.01 Ohm/1000'     •    DC Resistance Shield/Conductor: 2.09 Ohm/1000'     •    Rac @ 1KHz: 8.40mOhm/ft     •    Rac @ 1KHz: 6.34mOhm/ft (w/ Shield & Negative Conductor)     •    Capacitance @ 1KHz: 20.86 pF/ft     •    Capacitance @ 1KHz: 39.56 pF/ft (w/ Shield & Negative Conductor)     •    Inductance @ 1KHz: 0.201 uH/ft     •    Inductance @ 1KHz: 0.126 uH/ft (w/ Shield & Negative Conductor)     •    0.032" (0.810mm) Thick PVC Outer Jacket     •    0.0275" (0.70mm) Foamed Polyethylene (FPE) Insulation     •    Nominal Outer Cable Diameter - 0.295” (7.493mm)     •    Weight: 0.066 lb per Foot     •    Sold Per Foot - Specify Quantity as # of Feet Stocked in 500' Spools Note: This is not a Siamese cable. You will need to order 10' to make a 5' analog audio cable pair. Request A Sample   Go Back to Our Main Audio Cable Index Page View Locking RCA Connectors - Audio View Our Main AV-Cable Page FZ162AA-C

Larger FZ162AA Image

 

---

Shipping Policy

Request Info / Quote

ViaBlue NF-B Subwoofer Cable - Per 100' Spool

ViaBlue NF-B subwoofer interconnects are specially designed LF cables which play the bass range with full acoustic power and pressure. The capacitance between inner conductor and screen is maximized by a very thick inner conductor. LDPE thermoplastic is used as insulation, thus increasing the capacitance even further for the same dimensions. This results in capacitive values of 128 pF/m. Because the signal transfer focuses on the bass range, it receives maximum boost so that the signal power is not degraded even over longer signal paths. Consequently, the subwoofers can be positioned to make the most of the room acoustics. The extremely thick inner conductor of the LFB subwoofer interconnect creates a high acoustic pressure for subwoofers. The triple shield constructed from a double, reverse spiral wound sheath and the LDPE semi-conducting layer shields the massive inner conductor. The built-in sheath current filter drains the inner/intermediate currents which occur with coaxial cables from the conductor and shielding.   ViaBlue NF-B Subwoofer Cable Specifications: ·          Color: Black ·          Thick Inner Conductor app. 14AWG ·          Conductor Insulation: LDPE ·          High Strand Inner Conductor – app. 550 Strands ·          3 Layers of Shielding o         1 Layer Tinned Copper Wound o         1 Layer Reverse Copper Wound o         1 Layer Black Semi-Conducting LDPE sheath ·          Overall Diameter of Cable 0.290” ·          DC Resistance: 2.49 Ohm / 1000' ·          Sold Per Foot - Specify Quantity as # of Feet Stocked in 330' Spools View the ViaBlue NF-B Subwoofer Cable Construction   The ViaBlue Products  www.ViaBlue.de in Germany Go Back to Our Main Audio Cable Index Page View Locking RCA Connectors - Audio View Our Main AV-Cable Page NF-B-100

Larger NF-B Image

 

---

Shipping Policy

Request Info / Quote

Furez Products FZ162AA 16AWG In-Wall Audio / Subwoofer - 250' Spool

The Furez Products in-wall subwoofer and analog audio cables are designed with the discerning audio enthusiasts in mind. The FZ162AA cable is used in both the Furez in-wall subwoofer (FZ162SUB) and analog audio (FZ162AA) cables utilizes a combination of large 16AWG 99.997% OFHC C10100 Copper conductors for minimal signal loss and foamed polyethylene (FPE) conductor insulation for low capacitance. The FZ162AA cable internally incorporates a twisted pair configuration with a 95% tinned copper braid and 100% Aluminum Polyester Foil wrap to maximize protection against unwanted noise infiltration.     Furez Products has addressed some of the issues typically found with in-wall subwoofer and audio cables. Furez Products has designed this analog audio cable with flexibility and longevity in mind. High flexibility is achieved by using a softer PVC jacket in combination with a high strand count conductor. The conductor insulation thickness has been increased to protect the inner conductors from oxidation. A non-oxidizing tinned copper braided shield is utilized to further ensure longevity of the cable since the shielding of a cable is more susceptible to oxidation due to its proximity to the outer edge of the cable. About Furez Products   Furez FZ162AA 16AWG CL3 In-Wall Analog Audio / Subwoofer Cable     •    16AWG Analog Audio Cable / Subwoofer Cable     •    UL CL3 In-Wall Rated Analog Audio Cable     •    Color: Dark Blue     •    Extremely Flexible: Well suited for In-Wall and Standard Analog Audio Cable Uses     •    103 Strand (Per Conductor) - 99.997% OFHC C10100 Copper Conductors     •    2 Conductor Plus Double Shielded Construction     •    Internally Twisted Conductors with Molded Round Outer Jacket     •    Double Shielded Construction             -    95% Tinned Copper Braid Shield (136 Strands of 36AWG = App. 15AWG)             -    100% Aluminum Polyester Foil Shield     •    See FZ162AA In-Wall Analog Audio Cable Construction Detail     •    DC Resistance: 4.01 Ohm/1000'     •    DC Resistance Shield/Conductor: 2.09 Ohm/1000'     •    Rac @ 1KHz: 8.40mOhm/ft     •    Rac @ 1KHz: 6.34mOhm/ft (w/ Shield & Negative Conductor)     •    Capacitance @ 1KHz: 20.86 pF/ft     •    Capacitance @ 1KHz: 39.56 pF/ft (w/ Shield & Negative Conductor)     •    Inductance @ 1KHz: 0.201 uH/ft     •    Inductance @ 1KHz: 0.126 uH/ft (w/ Shield & Negative Conductor)     •    0.032" (0.810mm) Thick PVC Outer Jacket     •    0.0275" (0.70mm) Foamed Polyethylene (FPE) Insulation     •    Nominal Outer Cable Diameter - 0.295” (7.493mm)     •    Weight: 16.5lb per 250' Spool     •    Sold Per 250' Spool Stocked in 500' Spools Note: This is not a Siamese cable. You will need to order 10' to make a 5' analog audio cable pair. Request A Sample   Go Back to Our Main Audio Cable Index Page View Locking RCA Connectors - Audio View Our Main AV-Cable Page FZ162AA-250

Larger FZ162AA Image

 

---

Shipping Policy

Request Info / Quote

Furez Products FZ162AA 16AWG In-Wall Audio / Subwoofer - 500' Spool

The Furez Products in-wall subwoofer and analog audio cables are designed with the discerning audio enthusiasts in mind. The FZ162AA cable is used in both the Furez in-wall subwoofer (FZ162SUB) and analog audio (FZ162AA) cables utilizes a combination of large 16AWG 99.997% OFHC C10100 Copper conductors for minimal signal loss and foamed polyethylene (FPE) conductor insulation for low capacitance. The FZ162AA cable internally incorporates a twisted pair configuration with a 95% tinned copper braid and 100% Aluminum Polyester Foil wrap to maximize protection against unwanted noise infiltration.     Furez Products has addressed some of the issues typically found with in-wall subwoofer and audio cables. Furez Products has designed this analog audio cable with flexibility and longevity in mind. High flexibility is achieved by using a softer PVC jacket in combination with a high strand count conductor. The conductor insulation thickness has been increased to protect the inner conductors from oxidation. A non-oxidizing tinned copper braided shield is utilized to further ensure longevity of the cable since the shielding of a cable is more susceptible to oxidation due to its proximity to the outer edge of the cable. About Furez Products   Furez FZ162AA 16AWG CL3 In-Wall Analog Audio / Subwoofer Cable     •    16AWG Analog Audio Cable / Subwoofer Cable     •    UL CL3 In-Wall Rated Analog Audio Cable     •    Color: Dark Blue     •    Extremely Flexible: Well suited for In-Wall and Standard Analog Audio Cable Uses     •    103 Strand (Per Conductor) - 99.997% OFHC C10100 Copper Conductors     •    2 Conductor Plus Double Shielded Construction     •    Internally Twisted Conductors with Molded Round Outer Jacket     •    Double Shielded Construction             -    95% Tinned Copper Braid Shield (136 Strands of 36AWG = App. 15AWG)             -    100% Aluminum Polyester Foil Shield     •    See FZ162AA In-Wall Analog Audio Cable Construction Detail     •    DC Resistance: 4.01 Ohm/1000'     •    DC Resistance Shield/Conductor: 2.09 Ohm/1000'     •    Rac @ 1KHz: 8.40mOhm/ft     •    Rac @ 1KHz: 6.34mOhm/ft (w/ Shield & Negative Conductor)     •    Capacitance @ 1KHz: 20.86 pF/ft     •    Capacitance @ 1KHz: 39.56 pF/ft (w/ Shield & Negative Conductor)     •    Inductance @ 1KHz: 0.201 uH/ft     •    Inductance @ 1KHz: 0.126 uH/ft (w/ Shield & Negative Conductor)     •    0.032" (0.810mm) Thick PVC Outer Jacket     •    0.0275" (0.70mm) Foamed Polyethylene (FPE) Insulation     •    Nominal Outer Cable Diameter - 0.295” (7.493mm)     •    Weight: 33 lb per 500' Spool     •    Sold Per 500' Spool - Specify Quantity as # of Feet Stocked in 500' Spools Note: This is not a Siamese cable. You will need to order 10' to make a 5' analog audio cable pair. Request A Sample   Go Back to Our Main Audio Cable Index Page View Locking RCA Connectors - Audio View Our Main AV-Cable Page FZ162AA-500

Larger FZ162AA Image

 

---