Shipping
Policy
Request
Info / Quote
| Arlington Ind. LVN2 - NC - Nail-On Dual Gang Low Voltage Bracket
|
|
Arlington Industries LVN2 Low Voltage mounting bracket features shallow mounting depth which allows for more wires to be run in the wall cavities. The shallow mounting depth also works better with reversible wall plates since the box itself is not obstructing the wire passage. Arlington Industries has also designed thier new construction brackets to have a front nail flange as well as a full outer flange for sheetrock to be backed up to ensuring proper support for the sheetrock and proper depth. The LVN2 and the LVS2 brackets also feature front flange nail holes on both sides of the boxes so the box can be supported on the both side by studs.
Arlington Industries LVN2 Low Voltage Open Work Bracket / Box
• For Low Voltage Class 2 Use Only
• Dual Gang Open Back Bracket
• Commonly Referred to as a Mud Ring
• For New Construction Applications
• Run More Wire Easier with Brackets vs Boxes
• Mounts to Wood Studs with Supplied Nails
• Impact Resistant Plastic results in less breakage on Jobsite
• Flange around box supports sheetrock
• Front Nail Holes for added box support
• Two Front Flanges for Double Stud Support
• Integrated Cable Tie-Off Loop to Hold Cables behind Box
• Shallow Mount - Only 0.80" Deep (Not Including Stud Side Nail Flange)
• Minimum Sheetrock or Panel Thickness - 0.45"
• Side Wall Thickness - 0.080"
• Nailing Flange Thickness - 0.090" (Front and Side)
• Panel Cut Out Dimensions - 4.12" W x 3.60" H
• Overall Dimensions - 5.5" W x 5.34" H x 1.61" Depth
View Arlington LVN2 Low Voltage Bracket - Back
View the Arlington LVN and LVS Product Brochure
View Low Voltage Work Box Index of Products
View Wall Plate Index of Products
LVN2
|
|
Shipping
Policy
Request
Info / Quote
| Arlington Ind. LVS2 - NC - Screw-On Dual Gang Low Voltage Bracket
|
|
Arlington Industries LVS2 Screw On Low Voltage mounting bracket features shallow mounting depth which allows for more wires to be run in the wall cavities. The shallow mounting depth also works better with reversible wall plates since the box itself is not obstructing the wire passage. Arlington Industries has also designed their new construction brackets to have a front nail flange as well as a full outer flange for sheetrock to be backed up to ensuring proper support for the sheetrock and proper depth. The LVN2 and the LVS2 brackets also feature front flange nail holes on both sides of the boxes so the box can be supported on the both side by studs.
Arlington Industries LVS2 Screw On Low Voltage Open Work Bracket / Box
• For Low Voltage Class 2 Use Only
• Dual Gang Open Back Bracket
• Commonly Referred to as a Mud Ring
• For New Construction Applications
• Run More Wire Easier with Brackets vs Boxes
• Mounts to Wood or Metal Studs with Supplied Screws
• Impact Resistant Plastic results in less breakage on Jobsite
• Flange around box supports sheetrock
• Front Nail Holes for added box support
• Two Front Flanges for Double Stud Support
• Integrated Cable Tie-Off Loop to Hold Cables behind Box
• Shallow Mount - Only 0.80" Deep (Not Including Stud Side Nail Flange)
• Minimum Sheetrock or Panel Thickness - 0.45"
• Side Wall Thickness - 0.080"
• Nailing Flange Thickness - 0.090" (Front and Side)
• Panel Cut Out Dimensions - 4.12" W x 3.60" H
• Overall Dimensions - 5.5" W x 5.34" H x 1.61" Depth
View Arlington LVS2 Low Voltage Bracket - Back
View the Arlington LVN and LVS Product Brochure
View Low Voltage Work Box Index of Products
View Wall Plate Index of Products
LVS2
|
|
|
Shipping
Policy
Request
Info / Quote
| Arlington Ind. LVD2 - NC - Dual Voltage Combo Box
|
|
Arlington Industries LVD2 Dual Voltage box is the perfect solution for supplying a wall mounted flat panel with power and AV cabling in one neat package. The LVD2 features deep space for wiring an outlet and the low voltage side is open for easy running of AV Cables. Both sides feature preconfigured cable management ports.
Arlington Industries LVD2 Dual Voltage Work Box
• For Low Voltage and Power Use
• Dual Voltage Combo Box
• For New Construction Applications
• Mounts to wood studs with included nails
• Impact Resistant Plastic results in less breakage on Jobsite
• Flange around box supports sheetrock
• Front Nail Holes for added box support
• Two Front Flanges for Double Stud Support
• Built-in Cable Management on Both Sides
• 1/2" and 3/4" Knock-outs on Low Voltage Side
• 17 cu in Power Side - 3.3" Deep
• Minimum Sheetrock or Panel Thickness - 0.387"
• Side Wall Thickness - 0.080"
• Flange Thickness - 0.090"
• Panel Cut Out Dimensions - 3.83" W x 3.60" H
• Overall Dimensions - 5.28" W x 5.0" H x 3.3" Depth
View Arlington LVD2 Dual Voltage Box - Back
View the Arlington LVD2 Product Brochure
View Low Voltage Work Box Index of Products
View Wall Plate Index of Products
LVD2
|
|
|
Shipping
Policy
Request
Info / Quote
| Arlington Ind. LVMB2 - NC - Nail-On Double Gang Low Voltage Bracket w 3/4 EMT
|
|
Arlington Industries LVMB2 Low Voltage mounting bracket features two integrated 3/4" EMT mounts for conduit or cable management and shallow mounting depth which allows for more wires to be run in the wall cavities. The LVMB also has a side flange for nailing or screwing the bracket into place. The shallow mounting depth also works better with reversible wall plates since the box itself is not obstructing the wire passage. Arlington Industries has also designed their new construction brackets to have a front nail flange as well as a full outer flange for sheetrock to be backed up to ensuring proper support for the sheetrock and proper depth.
Arlington Industries LVMB2 Low Voltage Open Work Bracket w/ 3/4" EMT Mount
• For Low Voltage Class 2 Use Only
• Two Gang Open Back Bracket
• Integrated 3/4" EMT Top and Bottom Mount
• Commonly Referred to as a Mud Ring
• For New Construction Applications
• Run More Wire Easier with Brackets vs Boxes
• Side flange for nailing and or screw bracket to stud
• Impact Resistant Plastic results in less breakage on Jobsite
• Flange around box supports sheetrock
• Front Nail Holes for mounting
• Shallow Mount - Only 0.45" Deep (Not Including EMT Mount)
• Minimum Sheetrock or Panel Thickness - 0.36"
• Side Wall Thickness - 0.110"
• Nailing Flange Thickness - 0.085" (Front)
• Panel Cut Out Dimensions - 4.22" W x 3.70" H
• Overall Dimensions - 5.35" W x 4.45" H x 1.96" Depth
View Arlington LVMB2 Low Voltage Bracket - Back
View the Arlington LVMB Product Brochure
View Low Voltage Work Box Index of Products
View Wall Plate Index of Products
LVMB2
|
|
|
Shipping
Policy
Request
Info / Quote
| Arlington Ind. DVFR2W - Recessed 2 Gang Electrical Box - Black or White
|
|
Arlington Industries DVFR2W, DVFR3W and DVFR4W recessed electrical boxes are the perfect space saver behind plasmas, LCD TV, or wherever you need to preserve space. The recessed outlet box allows for the power plug and AV connections to be set behind the surface of the sheetrock. The innovative design also allows for new construction or retrofit applications. The 2, 3 and 4 gang versions have a moveable divider so power and low voltage can be used in the same box. Maximize the efficiency of the DVFR box based on the particular application by moving the voltage divider to allocate more or less space for power or AV connections.
Arlington Industries DVFR2W Recessed Electrical Box
• UL / CSA Listed
• Dual Gang Recessed Box
• Dual Voltage - Power and Low Voltage use with included divider
• Retrofit or New Construction Applications
• Accepts Standard 2 Gang Wall Plates
• Impact Resistant Plastic results in less breakage on Jobsite
• Removable Front Flange
• Integrated NM Cable Holder, 1/2" 3/4" Knockouts
• Works with 2 x 4 Studs and 1/4" or thicker sheetrock
• Total Internal Depth: 3.75"
• Internal Depth to Plate: 1.25"
• Side Wall Thickness - 0.105"
• Front Flange Thickness - 0.127"
• Panel Cut Out Dimensions -5.1"W x 5.9" H
• Overall Dimensions - 6" W x 6.625"H x 4.0" Depth
• Includes: Mounting Hardware, Voltage Divider and 2 Gang Decora Trim Plate
View Arlington DVRF2W Recessed Electrical Box - Back
View Arlington DVRF2W Recessed Electrical Box - Flange Off
View the Arlington DVFR2W Product Brochure
View Low Voltage Work Box Index of Products
View ALL Arlington Industries Products
DVFR2
|
 | |
| |
|
|
|
Shipping
Policy
Request
Info / Quote
| Arlington Ind. SP100 Saftey Protection Nail Plate
|
|
Nail Safety protection plates are used to protect wires and cables from by nails or screws from dry wall application or blind drilling of holes through studs. If you drilled a hole in a stud to pass pipe or cables it is a very good idea to use one of our nail safety protection plates to prevent accidental damage in the years to come. No added hardware is needed for the safety plate installation. Simply hammer into place.
Arlington Industries SP100 Safety Plate Specifications
• Safety Plate
• Protects against accidental damage
• 16AWG 0.060" THK Steel Constuction
• Size - 1.5" H x 2.75" L
SP100
|
|
|
Shipping
Policy
Request
Info / Quote
| Wall Plates - Bulk Wire, Keystone, Hole Plates, Connector Plates Etc.
|
|
|
Shipping
Policy
Request
Info / Quote
| Wall Plate and Panel Mount Connectors - RCA, F-Pin, RJ45, RJ11 Etc.
|
|
Wall Plate Connectors for Audio, Video and Communications
Most of our AV Connectors can be used in Hole Plates, Keystone Plates or can simply be Panel Mounted
Wall Plate Connectors
|
|
|
Shipping
Policy
Request
Info / Quote
| Cable Management Solutions
|
|
|
|