Shipping Included on Orders of $25 or More
| Buttkicker BK-Link Wireless Audio Transmitter
|
|
The Buttkicker BK-Link
§ Eliminates the need to run a subwoofer cable from the AV receiver to the BK Amplifier or Powered subwoofer
§ Sends audio signal from the subwoofer or line out of the A/V processor to the input of the Buttkicker Amplifier
§ 900MHz Bandwidth
§ Frequency Response Range of 5-350Hz
§ Transmitance Range of 30' without obstruction
§ Sending Unit features Red and Green Status LED
§ RF Gain control knob on Sending Unit for tuning to you system and environment
§ LED Indicator on Receiver for identification of signal reception
§ Includes:
o 1 Send Unit w/ AC Adaptor
o 1 Receiver Unit w/ AC Adapter
o 2 RCA Male to Male Cables
View the BK-Link PDF Instructions
BK-Link
|
|
Shipping Included on Orders of $25 or More
| Buttkicker Quik Connect Package BK-QCP
|
|
The BK-QCP is designed to enable the user to easily connect one to four ButtKickers to one ButtKicker Power Amplifier in a simple "plug ‘n’ play" fashion. The "Quick Connect – Quick Select Box" also operates as an "on / off" selector allowing the user to select whether or not a ButtKicker will receive power. The Quick Connect kit includes the necessary cables to connect the ButtKicker Power Amplifier to a RCA "subwoofer" output on an A/V receiver even while using a power subwoofer.
The BK-QCP Buttkicker Quick Connect
§ Allows non-tech users to easily connect up to 4 Buttkickers to one amplifier
§ Impedance matching performed based on number of seats connected and selected
§ Includes
§ Four 12' lengths of 14 gauge speaker wire with banana type connectors for connecting ButtKickers to the “Quick Connect – Quick Select Box”
§ One 20' length of 14 gauge speaker wire with banana type connectors for connecting the
§ RCA “Y” connector and “Speaker Level Interface
§ Adaptor” to split the “subwoofer out” from either a professional or consumer A/V receiver to allow the use of both a subwoofer and the ButtKicker
§ 6' RCA cable for connecting the ButtKicker Power Amplifier to the A/V receiver
View the BK-QCP PDF Instructions
BK-QCP
|
|
|
Shipping Included on Orders of $25 or More
| Buttkicker Couch Mounting Kit
|
|
The Buttkicker BK-CMAK Couch Mounting Accessory Kit eliminates the troublesome mounting modification previously necessary to adapt shaker to your couch or recliner.
Simply place the accessory plate under one of the couch/chair legs and attach the included isolators to the remainder of the chair legs. Its very simple and very effective. No matter where you place the accessory plate the vibration will be evenly distributed to the whole couch. 1 Buttkicker will easily provide enough energy to shake the couch unlike the competitor’s tactical shakers.
View the BK-CMAK PDF Instructions
BK-CMAK Includes:
§ Mounting Plate with Top Rubber Isolator and bottom mounted rubber feet
§ Five Additional Rubber Isolators for the placing under the chair.
§ Mounting Hardware and wrench
**BK-LFE Sold Separately
BK-CMAK
|
|
|
Shipping Included on Orders of $25 or More
| Vibration Isolators VI-43 with Threaded Stud - Sold Individually
|
|
The VI-43 rubber vibration isolators are designed to support couches, chairs, platforms etc. for the purpose of maximizing the vibration effect produced by the Buttkicker Transducers. The VI-43 vibration isolators will allow the chair, couch platform to vibrate more freely and reduce the the amount of vibration energy transferred to the floor. These vibration isolators are particularly nice because the metal plate is at the top surface which allows the isolator to be attached without compressing the rubber. Additional the VI-43 isolator is a little taller which will lift the chair out of thick plush carpet. The VI-43 rubber isolators are supplied with a threaded stud and locking nut.
The goal of using an isolator like this is to get the base of the chair off the floor and to provide a new foot that has the ability to let the chair float more easily. The RI-K28 isolators do a good job of this on the thinner more commercial style carpets but if you have a thicker more plush carpet the VI-43 isolator will provide better results.
VI-43 Rubber Vibration Isolator Specifications:
· Rubber Isolator designed for individual seating, chairs and sofas
· Metal plate and Threaded Stud at top surface
- Advantage: The rubber won't compress when attaching to chair
- Advantage: More Rubber - More Action
· Neoprene Rubber can be used indoors or Outdoors
· Durometer Hardness 50A (Medium Hard by Classification not by feel)
· Load Capacity Per Each - 80lb (As Specified by MFG)
· 5/16-18 Threaded Stud with Locking Nut
· Threaded Stud Length - 0.600"
· Height: 1” Not Including Stud
· Width: 1.6”
· Sold as a QUANTITY OF 1
Automatic Quantity Discounts (Add Qty. to Cart for discount)
Buy 10 to 20 - Receive a 10% Discount
Buy 20 to 30 - Receive a 15% Discount
buy 30 or more - Receive a 20% Discount
VI-43
|
|
|
Shipping Included on Orders of $25 or More
| Buttkicker RI-K28-1 Small Vibration Isolators - Sold Individually
|
|
The Buttkicker RI-K28 rubber vibration isolators are designed to support couches, chairs, platforms for the purpose of maximizing the vibration effect produced by the Buttkicker Transducers. The RI-K28 vibration isolators will allow the chair, couch platform to vibrate more freely and reduce the the amount of vibration energy transferred to the floor.
Buttkicker RI-K28-1 Vibration Isolator Specifications
· Rubber Isolator designed for individual seating, chairs and sofas
· Metal plate imbedded in the rubber to allow proper tensioning of mounting screws
· Non-Marking Rubber - Indoor Use - Only
· Durometer Hardness 70A (Medium Hard by Classification not by feel)
· Estimated Load Capacity Per Each - 100lb (Not Specified by MFG)
· Height: 0.750”
· Width: 1.5”
· Mounting Screw Hole Diameter: 0.250”
· Mounting Hardware not included
· Sold as a QUANTITY OF 1
Automatic Quantity Discounts (Add Qty. to Cart for discount)
Buy 10 to 20 - Receive a 10% Discount
Buy 20 to 30 - Receive a 15% Discount
buy 30 or more - Receive a 20% Discount
RI-K28-1
|
|
|
Shipping Included on Orders of $25 or More
| Buttkicker RI-K28-4 Small Vibration Isolators Set of 4
|
|
The Buttkicker RI-K28 rubber vibration isolators are designed to support couches, chairs, platforms for the purpose of maximizing the vibration effect produced by the Buttkicker Transducers. The RI-K28 vibration isolators will allow the chair, couch platform to vibrate more freely and reduce the the amount of vibration energy transferred to the floor.
Buttkicker RI-K28 Vibration Isolator Specifications
· Rubber Isolator designed for individual seating, chairs and sofas
· Metal plate imbedded in the rubber to allow proper tensioning of mounting screws
· Non-Marking Rubber
· Durometer Hardness 70A (Medium Hard by Classification not by feel)
· Estimated Load Capacity Per Each - 100lb (Not Specified by MFG)
· Height: 0.750”
· Width: 1.5”
· Mounting Screw Hole Diameter: 0.250”
· Mounting Hardware not included
· Sold as a SET OF 4
RI-K28-4
|
|
|
Shipping Included on Orders of $25 or More
| Buttkicker RDB Series - Large Vibration Isolators
|
|
Buttkicker RDB series rubber vibration isolators are designed to support the heavy weight of platforms for the purpose of maximizing the vibration effect produced by the Buttkicker Transducers. The RDB series vibration isolators will allow the platform to vibrate more freely and reduce the the amount of vibration energy transferred to the sub floor.
Sizing – Take the total weight of applied to isolators (Platform, Chairs, People etc.) and divide that by the # if isolators used.
Example: 1000lb x 5 = 200 Use RDB-220
How many Isolators do I need - There isn’t a golden rule. The number of isolators needed depends on the construction of your platform. Basically, you only need as many isolators as necessary to prevent the platform from sagging. Typically 1 per corner or 1 or 2 in the center.
Pricing – per each isolator
|
Isolator Type |
Color Code |
Rated Capacity |
Rated Deflection |
A |
B |
C* |
D |
E |
F |
G |
|
RDB-120 |
Orange |
120 lbs |
0.50" |
2.37" |
3.87" |
1.25" |
.38 NC" |
1.75" |
3.00" |
0.34" |
|
RDB-220 |
Green |
220 lbs. |
0.50" |
2.37" |
3.87" |
1.25" |
.38 NC" |
1.75" |
3.00" |
0.34" |
|
RDB-375 |
Blue |
375 lbs. |
0.50" |
2.37" |
3.87" |
1.25" |
.38 NC" |
1.75" |
3.00" |
0.34" |
|
* Operating height varies with applied load. |
 
RDB-
|
 | |
| |
|
|
|
|