Shipping Included on Orders of $25 or More
| ViaBlue HS Black Chrome Vibration Isolation Speaker Spikes
|
|
|
Sale - Limited to Stock On Hand
Quantity: 1 Available 05/14/08
ViaBlue HS Speaker Spikes are used for acoustic decoupling of the speaker cases from the base. In this way, feedback is avoided. Clean acoustics from the speaker are thereby ensured. The bass acoustics are not transferred to furnishings and buildings but can develop freely in the room.
Each HS Speaker Spike consists of a total of 3 components: an M6 drive-in nut, the main absorber cone and a base plate. Not only are the acoustics more distinct, but visually the HS spikes are an eye-catcher.
The three-part HS Speaker Spikes are adjustable in height. The initial height is 1.5 inch. The maximum height adjustment recommended is 0.15 inch. The spikes are delivered with drive-in nuts.
ViaBlue HS-Spikes:
· Adjustable Height Speaker Spikes
· Constructed of Solid Brass and Hardened Steel
· Overall Height
o Minimum: 1.195” (Without bottom disk)
o Maximum: 1.35” (Without bottom disk and minimum thread usage)
· Overall Diameter: 0.70” (Widest Point)
· Includes 6mm Threaded Receiver for new construction
· Threaded rod is 6mm thread.
· Available in Black Chrome (As Shown)
· Sold as a set of 4
View a detail Photo of the ViaBlue HS Speaker Spike Components
The ViaBlue Products www.ViaBlue.de in Germany
HS-Black
|
|
Shipping Included on Orders of $25 or More
| ViaBlue QTC Silver Vibration Isolation Speaker Spikes
|
|
ViaBlue QTC Speaker Spikes are used for acoustic decoupling of the speaker cases from the base. In this way, feedback is avoided. Clean acoustics from the speaker are thereby ensured. The bass acoustics are not transferred to furnishings and buildings but can develop freely in the room.
The functional principle of the QTC Speaker Spikes is broken down into four task areas: 1.) reception of vibrations, 2.) gathering of the vibrations received, 3.) concentration of the received vibrations on one pressure point, 4.) deflection of the absorbed vibrations on the base.
Through the vibration reception disk, vibrations are received on the rotary plate with adjustable height. The vibrations gathered in the main cone are deflected. Excess pressure builds up and is transferred to the especially hardened points. On the equally identically hardened absorption master disk, a maximum pressure point is then created. The vibrations are eliminated.
ViaBlue QTC Speaker Spikes are manufactured from brass. The components subject to pressure (master disk, peak) are hardened with steel. The circumference at the widest point of a QTC spike is 30 mm. The initial height is 34 mm. The principal height adjustment may extend the initial height by another 5 mm. A second height adjustment can be achieved by shifting the peak and the threaded rod. As a rule, the principal height adjustment between the rotary disk and main cone is sufficient
ViaBlue QTC-Spaker Spikes:
· Adjustable Height Speaker Spikes
· Constructed of Solid Brass and Brass Hardened with Steel
· Overall Height
o Minimum: 1.275” (Without bottom disk and threaded rod)
o Maximum: 1.5” (Without bottom disk and threaded rod)
· Overall Diameter: 1.180” (Widest Point)
· Finish: Silver/Black
· Includes 6mm Threaded Receiver for new construction
· Threaded rod is 6mm thread on both ends.
· Optional 6mm to 8mm or 6mm to 1/4-20 Threaded Adapters
· Sold as a set of 4
ViaBlue QTC Speaker Spike Components
The ViaBlue Products www.ViaBlue.de in Germany
The quality of these speaker spikes enabled us to take the photo of the spike standing up with out ANY additional restraints. It was very easy to do!!! No Strings, Glue, Tape ETC. !!!
QTC-Silver
|
 | |
| |
|
|
|
Shipping Included on Orders of $25 or More
| ViaBlue QTC Black Vibration Isolation Speaker Spikes
|
|
ViaBlue QTC Speaker Spikes are used for acoustic decoupling of the speaker cases from the base. In this way, feedback is avoided. Clean acoustics from the speaker are thereby ensured. The bass acoustics are not transferred to furnishings and buildings but can develop freely in the room.
The functional principle of the QTC Speaker Spikes is broken down into four task areas: 1.) reception of vibrations, 2.) gathering of the vibrations received, 3.) concentration of the received vibrations on one pressure point, 4.) deflection of the absorbed vibrations on the base.
Through the vibration reception disk, vibrations are received on the rotary plate with adjustable height. The vibrations gathered in the main cone are deflected. Excess pressure builds up and is transferred to the especially hardened points. On the equally identically hardened absorption master disk, a maximum pressure point is then created. The vibrations are eliminated.
ViaBlue QTC Speaker Spikes are manufactured from brass. The components subject to pressure (master disk, peak) are hardened with steel. The circumference at the widest point of a QTC spike is 30 mm. The initial height is 34 mm. The principal height adjustment may extend the initial height by another 5 mm. A second height adjustment can be achieved by shifting the peak and the threaded rod. As a rule, the principal height adjustment between the rotary disk and main cone is sufficient
ViaBlue QTC-Speaker Spikes:
· Adjustable Height Speaker Spikes
· Constructed of Solid Brass and Brass Hardened with Steel
· Overall Height
o Minimum: 1.275” (Without bottom disk and threaded rod)
o Maximum: 1.5” (Without bottom disk and threaded rod)
· Overall Diameter: 1.180” (Widest Point)
· Finish: Black w/ Gold
· Includes 6mm Threaded Receiver for new construction
· Threaded rod is 6mm thread on both ends.
· Optional 6mm to 8mm or 6mm to 1/4-20 Threaded Adapters
· Sold as a set of 4
ViaBlue QTC Speaker Spike Components
The ViaBlue Products www.ViaBlue.de in Germany
QTC-Black
|
| |
| |
|
|
|
Shipping Included on Orders of $25 or More
| ViaBlue QTC 6mm to 8mm Threaded Adapters
|
|
ViaBlue QTC-6mm to 8mm Threaded Adapters:
· Used with ViaBlue QTC Series Spikes
· Converts the std. 6mm thread to 8mm thread
· For speakers and other AV equip with 8mm threads
· Overall Length 0.8"
· Sold as a set of 4
The ViaBlue Products www.ViaBlue.de in Germany
QTC68
|
|
|
Shipping Included on Orders of $25 or More
| ViaBlue QTC 6mm to 1/4-20 Threaded Adapters
|
|
ViaBlue QTC-6mm to 1/4-20 Threaded Adapters:
· Used with ViaBlue QTC Series Spikes
· Converts the std. 6mm thread to 1/4-20 thread
· For speakers and other AV equip with 1/4-20 threads
· Overall Length 0.8"
· Sold as a set of 4
The ViaBlue Products www.ViaBlue.de in Germany
QTC1420
|
|
|
Shipping Included on Orders of $25 or More
| ViaBlue TRI Black Vibration Isolation Speaker Spikes
|
|
ViaBlue TRI absorbers receive vibrations from through a high pressure concentrated on three minimum points (peaks), maximum pressure is built up as a connection point between vibrating bodies and their base. Through the extreme pressure points, the vibrations are eliminated. This leads to vibration absorption. The vibrations of speakers and devices are not transmitted to furnishings and buildings and do not cause any static noise.
The functional principle of the TRI Absorber is broken down into three task areas: 1.) reception of vibrations, 2.) concentration of the vibrations received/gathered on three pressure points, 3.) deflection of the absorbed vibrations on the base.
ViaBlue TRI Absorbers are manufactured from brass. The components subject to pressure (master disk, peak) are hardened with steel. The circumference at the widest point of a TRI absorber is 30 mm. The initial height is 15 mm. The principal height adjustment may extend or shorten the initial height by another 1 mm.
An absorber consists of: a threaded grounding component, a rotary disk of adjustable height, three steel-hardened spikes (peaks), and a hardened master disk incorporated in a vibration reception disk.
The Viablue TRI Vibration Isolation Spikes are designed for use with components that do not have threaded holes. These work exceptionally well for equipment racks, bookshelf speakers, subwoofers etc.
ViaBlue TRI-Spikes:
· Adjustable Height Vibration Isolation Spikes
· Constructed of Solid Brass and Hardened Brass w/ Steel
· Overall Height
o Minimum: 0.585"
o Maximum: 0.635"
· Overall Diameter: (Widest Point): 1.185"
· Color: Black w/ Gold
· No need to worry about thread size, Designed placement without screws
· The easiest to use vibration isolation spikes ever designed!!
· Sold as a Qty: of 1 NOT a set of 4
ViaBlue TRI Vibration Isolation Spike Components
The ViaBlue Products www.ViaBlue.de in Germany
TRI-Black
|
|
|
Shipping Included on Orders of $25 or More
| ViaBlue TRI Silver Vibration Isolation Speaker Spikes
|
|
ViaBlue TRI absorbers receive vibrations from through a high pressure concentrated on three minimum points (peaks), maximum pressure is built up as a connection point between vibrating bodies and their base. Through the extreme pressure points, the vibrations are eliminated. This leads to vibration absorption. The vibrations of speakers and devices are not transmitted to furnishings and buildings and do not cause any static noise.
The functional principle of the TRI Absorber is broken down into three task areas: 1.) reception of vibrations, 2.) concentration of the vibrations received/gathered on three pressure points, 3.) deflection of the absorbed vibrations on the base.
ViaBlue TRI Absorbers are manufactured from brass. The components subject to pressure (master disk, peak) are hardened with steel. The circumference at the widest point of a TRI absorber is 30 mm. The initial height is 15 mm. The principal height adjustment may extend or shorten the initial height by another 1 mm.
An absorber consists of: a threaded grounding component, a rotary disk of adjustable height, three steel-hardened spikes (peaks), and a hardened master disk incorporated in a vibration reception disk.
The Viablue TRI Vibration Isolation Spikes are designed for use with components that do not have threaded holes. These work exceptionally well for equipment racks, bookshelf speakers, subwoofers etc.
ViaBlue TRI-Spikes:
· Adjustable Height Speaker Spikes
· Constructed of Solid Brass and Hardened Brass w/ Steel
· Overall Height
o Minimum: 0.585"
o Maximum: 0.635"
· Overall Diameter: (Widest Point): 1.185"
· Color: Silver w/Black
· No need to worry about thread size, Designed placement without screws
· The easiest to use vibration isolation spikes ever designed!!
· Sold as a Qty: of 1 NOT a set of 4
ViaBlue TRI Vibration Isolation Spike Components
The ViaBlue Products www.ViaBlue.de in Germany
TRI-Silver
|
|
|
|