Shipping Included on Orders of $25 or More
| Vibration Isolators VI-43 with Threaded Stud - Sold Individually
|
|
The VI-43 rubber vibration isolators are designed to support couches, chairs, platforms etc. for the purpose of maximizing the vibration effect produced by the Buttkicker Transducers. The VI-43 vibration isolators will allow the chair, couch platform to vibrate more freely and reduce the the amount of vibration energy transferred to the floor. These vibration isolators are particularly nice because the metal plate is at the top surface which allows the isolator to be attached without compressing the rubber. Additional the VI-43 isolator is a little taller which will lift the chair out of thick plush carpet. The VI-43 rubber isolators are supplied with a threaded stud and locking nut.
The goal of using an isolator like this is to get the base of the chair off the floor and to provide a new foot that has the ability to let the chair float more easily. The RI-K28 isolators do a good job of this on the thinner more commercial style carpets but if you have a thicker more plush carpet the VI-43 isolator will provide better results.
VI-43 Rubber Vibration Isolator Specifications:
· Rubber Isolator designed for individual seating, chairs and sofas
· Metal plate and Threaded Stud at top surface
- Advantage: The rubber won't compress when attaching to chair
- Advantage: More Rubber - More Action
· Neoprene Rubber can be used indoors or Outdoors
· Durometer Hardness 50A (Medium Hard by Classification not by feel)
· Load Capacity Per Each - 80lb (As Specified by MFG)
· 5/16-18 Threaded Stud with Locking Nut
· Threaded Stud Length - 0.600"
· Height: 1” Not Including Stud
· Width: 1.6”
· Sold as a QUANTITY OF 1
Automatic Quantity Discounts (Add Qty. to Cart for discount)
Buy 10 to 20 - Receive a 10% Discount
Buy 20 to 30 - Receive a 15% Discount
buy 30 or more - Receive a 20% Discount
VI-43
|
|
Shipping Included on Orders of $25 or More
| Buttkicker RI-K28-1 Small Vibration Isolators - Sold Individually
|
|
The Buttkicker RI-K28 rubber vibration isolators are designed to support couches, chairs, platforms for the purpose of maximizing the vibration effect produced by the Buttkicker Transducers. The RI-K28 vibration isolators will allow the chair, couch platform to vibrate more freely and reduce the the amount of vibration energy transferred to the floor.
Buttkicker RI-K28-1 Vibration Isolator Specifications
· Rubber Isolator designed for individual seating, chairs and sofas
· Metal plate imbedded in the rubber to allow proper tensioning of mounting screws
· Non-Marking Rubber - Indoor Use - Only
· Durometer Hardness 70A (Medium Hard by Classification not by feel)
· Estimated Load Capacity Per Each - 100lb (Not Specified by MFG)
· Height: 0.750”
· Width: 1.5”
· Mounting Screw Hole Diameter: 0.250”
· Mounting Hardware not included
· Sold as a QUANTITY OF 1
Automatic Quantity Discounts (Add Qty. to Cart for discount)
Buy 10 to 20 - Receive a 10% Discount
Buy 20 to 30 - Receive a 15% Discount
buy 30 or more - Receive a 20% Discount
RI-K28-1
|
|
|
Shipping Included on Orders of $25 or More
| Buttkicker RI-K28-4 Small Vibration Isolators Set of 4
|
|
The Buttkicker RI-K28 rubber vibration isolators are designed to support couches, chairs, platforms for the purpose of maximizing the vibration effect produced by the Buttkicker Transducers. The RI-K28 vibration isolators will allow the chair, couch platform to vibrate more freely and reduce the the amount of vibration energy transferred to the floor.
Buttkicker RI-K28 Vibration Isolator Specifications
· Rubber Isolator designed for individual seating, chairs and sofas
· Metal plate imbedded in the rubber to allow proper tensioning of mounting screws
· Non-Marking Rubber
· Durometer Hardness 70A (Medium Hard by Classification not by feel)
· Estimated Load Capacity Per Each - 100lb (Not Specified by MFG)
· Height: 0.750”
· Width: 1.5”
· Mounting Screw Hole Diameter: 0.250”
· Mounting Hardware not included
· Sold as a SET OF 4
RI-K28-4
|
|
|
Shipping Included on Orders of $25 or More
| Buttkicker RDB Series - Large Vibration Isolators
|
|
Buttkicker RDB series rubber vibration isolators are designed to support the heavy weight of platforms for the purpose of maximizing the vibration effect produced by the Buttkicker Transducers. The RDB series vibration isolators will allow the platform to vibrate more freely and reduce the the amount of vibration energy transferred to the sub floor.
Sizing – Take the total weight of applied to isolators (Platform, Chairs, People etc.) and divide that by the # if isolators used.
Example: 1000lb x 5 = 200 Use RDB-220
How many Isolators do I need - There isn’t a golden rule. The number of isolators needed depends on the construction of your platform. Basically, you only need as many isolators as necessary to prevent the platform from sagging. Typically 1 per corner or 1 or 2 in the center.
Pricing – per each isolator
|
Isolator Type |
Color Code |
Rated Capacity |
Rated Deflection |
A |
B |
C* |
D |
E |
F |
G |
|
RDB-120 |
Orange |
120 lbs |
0.50" |
2.37" |
3.87" |
1.25" |
.38 NC" |
1.75" |
3.00" |
0.34" |
|
RDB-220 |
Green |
220 lbs. |
0.50" |
2.37" |
3.87" |
1.25" |
.38 NC" |
1.75" |
3.00" |
0.34" |
|
RDB-375 |
Blue |
375 lbs. |
0.50" |
2.37" |
3.87" |
1.25" |
.38 NC" |
1.75" |
3.00" |
0.34" |
|
* Operating height varies with applied load. |
 
RDB-
|
 | |
| |
|
|
|
Shipping Included on Orders of $25 or More
| Buttkicker Couch Mounting Kit
|
|
The Buttkicker BK-CMAK Couch Mounting Accessory Kit eliminates the troublesome mounting modification previously necessary to adapt shaker to your couch or recliner.
Simply place the accessory plate under one of the couch/chair legs and attach the included isolators to the remainder of the chair legs. Its very simple and very effective. No matter where you place the accessory plate the vibration will be evenly distributed to the whole couch. 1 Buttkicker will easily provide enough energy to shake the couch unlike the competitor’s tactical shakers.
View the BK-CMAK PDF Instructions
BK-CMAK Includes:
§ Mounting Plate with Top Rubber Isolator and bottom mounted rubber feet
§ Five Additional Rubber Isolators for the placing under the chair.
§ Mounting Hardware and wrench
**BK-LFE Sold Separately
BK-CMAK
|
|
|
|