Home > Work Boxes

 



Shipping Policy

Request Info / Quote
Arlington Ind. LVN1 - NC - Nail-On Single Gang Low Voltage Bracket 
   Add to basketView Cart

Arlington Industries LVN1 Low Voltage mounting bracket features shallow mounting depth which allows for more wires to be run in the wall cavities. The shallow mounting depth also works better with reversible wall plates since the box itself is not obstructing the wire passage. Arlington Industries has also designed their new construction brackets to have a front nail flange as well as a full outer flange for sheetrock to be backed up to ensuring proper support for the sheetrock and proper depth.

 

Arlington Industries LVN1 Low Voltage Open Work Bracket / Box

    •    For Low Voltage Class 2 Use Only

    •    Single Gang Open Back Bracket

    •    Commonly Referred to as a Mud Ring

    •    For New Construction Applications

    •    Run More Wire Easier with Brackets vs Boxes

    •    Mounts to Wood Studs with Supplied Nails

    •    Impact Resistant Plastic results in less breakage on Jobsite

    •    Flange around box supports sheetrock

    •    Front Nail Holes for added box support

    •    Integrated Cable Tie-Off Loop to Hold Cables behind Box

    •    Shallow Mount - Only 0.55" Deep (Not Including Stud Side Nail Flange)

    •    Minimum Sheetrock or Panel Thickness - 0.45"

    •    Side Wall Thickness - 0.080"

    •    Nailing Flange Thickness - 0.090" (Front and Side)

    •    Panel Cut Out Dimensions - 2.15" W x 3.60" H

    •    Overall Dimensions - 3.14" W x 5.34" H x 1.61" Depth

View Arlington LVN1 Low Voltage Bracket - Back

View the Arlington LVN and LVS Product Brochure

 

View Low Voltage Work Box Index of Products

View Wall Plate Index of Products



LVN1
Arlington Ind. LVN1 - NC - Nail-On Single Gang Low Voltage Bracket

Larger LVN1 Low Voltage Bracket
 
 


Shipping Policy

Request Info / Quote
Arlington Ind. LVS1 - NC - Screw-On Single Gang Low Voltage Bracket 
   Add to basketView Cart

Arlington Industries LVS1 Screw On Low Voltage mounting bracket features shallow mounting depth which allows for more wires to be run in the wall cavities. The shallow mounting depth also works better with reversible wall plates since the box itself is not obstructing the wire passage. Arlington Industries has also designed their new construction brackets to have a front nail flange as well as a full outer flange for sheetrock to be backed up to ensuring proper support for the sheetrock and proper depth.

 

Arlington Industries LVS1 Screw On Low Voltage Open Work Bracket / Box

    •    For Low Voltage Class 2 Use Only

    •    Single Gang Open Back Bracket

    •    Commonly Referred to as a Mud Ring

    •    For New Construction Applications

    •    Run More Wire Easier with Brackets vs Boxes

    •    Mounts to Wood Studs or Metal Stud with Supplied Screws

    •    Impact Resistant Plastic results in less breakage on Jobsite

    •    Flange around box supports sheetrock

    •    Front Nail Holes for added box support

    •    Integrated Cable Tie-Off Loop to Hold Cables behind Box

    •    Shallow Mount - Only 0.55" Deep (Not Including Stud Side Nail Flange)

    •    Minimum Sheetrock or Panel Thickness - 0.45"

    •    Side Wall Thickness - 0.080"

    •    Nailing Flange Thickness - 0.090" (Front and Side)

    •    Panel Cut Out Dimensions - 2.15" W x 3.60" H

    •    Overall Dimensions - 3.14" W x 5.34" H x 1.61" Depth

View Arlington LVS1 Low Voltage Bracket - Back

View the Arlington LVN and LVS Product Brochure

 

View Low Voltage Work Box Index of Products

View Wall Plate Index of Products



LVS1
Arlington Ind. LVS1 - NC - Screw-On Single Gang Low Voltage Bracket

Larger LVS1 Low Voltage Bracket
 
 


Shipping Policy

Request Info / Quote
Arlington Ind. LVH1 - NC - Nail-On Horizontal Single Gang Low Voltage Bracket 

SALE Was    Is   
 Add to basketView Cart

Arlington Industries LVH1 Low Voltage mounting bracket features versatile horizontal or vertical mounting and shallow mounting depth which allows for more wires to be run in the wall cavities. The use of 4 extended rear posts provide firm support to prevent wobbling. The shallow mounting depth also works better with reversible wall plates since the box itself is not obstructing the wire passage. Arlington Industries has also designed their new construction brackets to have a front nail flange as well as a full outer flange for sheetrock to be backed up to ensuring proper support for the sheetrock and proper depth.

 

Arlington Industries LVH1 horizontal / Vertical Low Voltage Open Work Bracket

    •    For Low Voltage Class 2 Use Only

    •    Single Gang Open Back Bracket

    •    Horizontal or Vertical Mount

    •    Commonly Referred to as a Mud Ring

    •    For New Construction Applications

    •    Run More Wire Easier with Brackets vs Boxes

    •    Four Rear 0.75" Posts provide support to prevent wobble

    •    Impact Resistant Plastic results in less breakage on Jobsite

    •    Flange around box supports sheetrock

    •    Front Nail Holes for mounting

    •    Shallow Mount - Only 0.45" Deep (Not Including Support Posts)

    •    Minimum Sheetrock or Panel Thickness - 0.36"

    •    Side Wall Thickness - 0.125"

    •    Nailing Flange Thickness - 0.090" (Front and Side)

    •    Panel Cut Out Dimensions - 2.25" W x 3.70" H

    •    Overall Dimensions - 3.22" W x 4.56" H x 1.21" Depth

View Arlington LVH1 Low Voltage Bracket - Back

 

View Low Voltage Work Box Index of Products

View Wall Plate Index of Products



LVH1
Arlington Ind. LVH1 - NC - Nail-On Horizontal Single Gang Low Voltage Bracket

Larger LV1H Low Voltage Bracket
 
 


Shipping Policy

Request Info / Quote
Arlington Ind. LV1H1K - NC - Nail-On Horizontal Single Gang Low Voltage Bracket w/KO 

SALE Was    Is   
 Add to basketView Cart

Arlington Industries LVH1K Low Voltage mounting bracket features versatile horizontal or vertical mounting, integrated cable management KO for top or bottom placement and shallow mounting depth which allows for more wires to be run in the wall cavities. The use of 4 extended rear posts provide firm support to prevent wobbling. The shallow mounting depth also works better with reversible wall plates since the box itself is not obstructing the wire passage. Arlington Industries has also designed their new construction brackets to have a front nail flange as well as a full outer flange for sheetrock to be backed up to ensuring proper support for the sheetrock and proper depth.

 

Arlington Industries LVH1K horizontal / Vertical Low Voltage Open Work Bracket w/ KO

    •    For Low Voltage Class 2 Use Only

    •    Single Gang Open Back Bracket

    •    Horizontal or Vertical Mount

    •    Integrated 3/4" or 1" KO for Cable Management

    •    Commonly Referred to as a Mud Ring

    •    For New Construction Applications

    •    Run More Wire Easier with Brackets vs Boxes

    •    Four Rear 0.75" Posts provide support to prevent wobble

    •    Impact Resistant Plastic results in less breakage on Jobsite

    •    Flange around box supports sheetrock

    •    Front Nail Holes for mounting

    •    Shallow Mount - Only 0.45" Deep (Not Including Support Posts)

    •    Minimum Sheetrock or Panel Thickness - 0.36"

    •    Side Wall Thickness - 0.125"

    •    Nailing Flange Thickness - 0.090" (Front and Side)

    •    Panel Cut Out Dimensions - 2.25" W x 3.70" H

    •    Overall Dimensions - 3.22" W x 4.56" H x 1.21" Depth

View Arlington LVH1K Low Voltage Bracket - Back

View Arlington LVH1K Low Voltage Bracket - Assembled

 

View Low Voltage Work Box Index of Products

View Wall Plate Index of Products



LVH1K
Arlington Ind. LV1H1K - NC - Nail-On Horizontal Single Gang Low Voltage Bracket w/KO

Larger LV1HK Low Voltage Bracket
 
 


Shipping Policy

Request Info / Quote
Arlington Ind. LVMB1 - NC - Nail-On Single Gang Low Voltage Bracket w 3/4 EMT 
   Add to basketView Cart

Arlington Industries LVMB1 Low Voltage mounting bracket features two integrated 3/4" EMT mounts for conduit or cable management and shallow mounting depth which allows for more wires to be run in the wall cavities. The LVMB also has a side flange for nailing or screwing the bracket into place. The shallow mounting depth also works better with reversible wall plates since the box itself is not obstructing the wire passage. Arlington Industries has also designed their new construction brackets to have a front nail flange as well as a full outer flange for sheetrock to be backed up to ensuring proper support for the sheetrock and proper depth.

 

Arlington Industries LVMB1 Low Voltage Open Work Bracket w/ 3/4" EMT Mount

    •    For Low Voltage Class 2 Use Only

    •    Single Gang Open Back Bracket

    •    Integrated 3/4" EMT Top and Bottom Mount

    •    Commonly Referred to as a Mud Ring

    •    For New Construction Applications

    •    Run More Wire Easier with Brackets vs Boxes

    •    Side flange for nailing and or screw bracket to stud

    •    Impact Resistant Plastic results in less breakage on Jobsite

    •    Flange around box supports sheetrock

    •    Front Nail Holes for mounting

    •    Shallow Mount - Only 0.45" Deep (Not Including EMT Mount)

    •    Minimum Sheetrock or Panel Thickness - 0.36"

    •    Side Wall Thickness - 0.090"

    •    Nailing Flange Thickness - 0.085" (Front)

    •    Panel Cut Out Dimensions - 2.19" W x 3.70" H

    •    Overall Dimensions - 3.25" W x 4.45" H x 1.96" Depth

View Arlington LVMB1 Low Voltage Bracket - Back

View the Arlington LVMB Product Brochure

 

View Low Voltage Work Box Index of Products

View Wall Plate Index of Products



LVMB1
Arlington Ind. LVMB1 - NC - Nail-On Single Gang Low Voltage Bracket w 3/4 EMT

Larger LVMB1 Low Voltage Bracket
 
 


Shipping Policy

Request Info / Quote
Arlington Ind. DVFR1 - Recessed 1 Gang Electrical Box - Black or White 
   Add to basketView Cart

Arlington Industries DVFR1W recessed electrical box is the perfect space saver. The DVFR1W is the perfect space saver behind plasmas, LCD TV, or wherever you need to preserve space. The recessed outlet box allows for the plug to be set behind the surface of the sheetrock. The innovative design also allows for new construction or retrofit applications.

 

Arlington Industries DVFR1W Recessed Electrical Box

    •    Color: Black or White  

    •    UL / CSA Listed

    •    Single Gang Recessed Box

    •    Power or Low Voltage Use

    •    Retrofit or New Construction Applications

    •    Accepts Standard Wall Plates

    •    Impact Resistant Plastic results in less breakage on Jobsite

    •    Removable Front Flange

    •    Integrated NM Cable Holder and 1/2" Knockout

    •    Works with 2 x 4 Studs and 1/2" or thicker sheetrock

    •    Total Internal Depth: 3.75"

    •    Internal Depth to Plate: 1.25"

    •    Side Wall Thickness - 0.105"

    •    Front Flange Thickness - 0.127"

    •    Panel Cut Out Dimensions -3.33"W x 5.9" H

    •    Overall Dimensions - 4.17" W x 6.625"H x 4.0" Depth

    •    Includes: Mounting Hardware, Outlet Plate and Decora Trim Plate

View Arlington DVRF1W Recessed Electrical Box  - Back

View Arlington DVRF1W Recessed Electrical Box  - Flange Off

View the Arlington DVFR1W Product Brochure

 

View Low Voltage Work Box Index of Products



DVFR1
Arlington Ind. DVFR1 - Recessed 1 Gang Electrical Box - Black or White

Larger DVFR1W Recessed Box
 
 


Shipping Policy

Request Info / Quote
Arlington Ind. LVU1W - Recessed 1 Gang Low Voltage Box 
   Add to basketView Cart

Arlington Industries LVU1W recessed low voltage box is the perfect space saver behind plasmas, LCD TV, or wherever you need to preserve space. The recessed low voltage box allows for AV cables to come out of the wall starting from behind the sheetrock surface. The recessed feature allows connectors to be set back so flat panel TVs can be placed closer to the wall. Not using connector plates?? That's OK, the recessed feature also allows cables to start bending sooner enabling closer placement of flat panel TVs. The LV1U's innovative design also allows for new construction or retrofit applications and includes all the hardware needed.

 

Arlington Industries LVU1W Recessed Low Voltage Box

    •    UL / CSA Listed

    •    Color: White

    •    Single Gang Recessed Low Voltage Box

    •    Retrofit or New Construction Applications

    •    Accepts Standard 1 Gang Wall Plates and Decora Plates

    •    Impact Resistant Plastic results in less breakage on Jobsite

    •    Removable Front Flange

    •    Removable NM Cable Holder, 1" & 13/8" Knockouts

    •    Works with 2 x 4 Studs and 3/8" or Thicker Sheetrock

    •    Total Internal Depth: 2.125"

    •    Internal Depth Front Flange to Trim Plate: 1.375"

    •    Side Wall Thickness - 0.085"

    •    Front Flange Thickness - 0.130"

    •    Panel Cut Out Dimensions -3.25"W x 5.9" H

    •    Overall Dimensions - 4 3/16" W x 6 11/16"H x 2 3/16" D

    •    Includes: Mounting Hardware and 1 Gang Decora Trim Plate

View Arlington LVU1W Recessed Low Voltage Box  - Back

View Arlington LVU1W Recessed Low Voltage Box  - Side

View Arlington LVU1W Recessed Low Voltage Box  - Components

View the Arlington LVU1W Installation Instructions

View the Arlington LVU1W Product Brochure

 

View Low Voltage Work Box Index of Products

View Wall Plate Index of Products

View ALL Arlington Industries Products



LVU1W
Arlington Ind. LVU1W - Recessed 1 Gang Low Voltage Box

Larger LVU1W Recessed Box
 
 


Shipping Policy

Request Info / Quote
Arlington Ind. SP100 Saftey Protection Nail Plate 
   Add to basketView Cart

Nail Safety protection plates are used to protect wires and cables from by nails or screws from dry wall application or blind drilling of holes through studs. If you drilled a hole in a stud to pass pipe or cables it is a very good idea to use one of our nail safety protection plates to prevent accidental damage in the years to come. No added hardware is needed for the safety plate installation. Simply hammer into place.

 

Arlington Industries SP100 Safety Plate Specifications

    •    Safety Plate

    •    Protects against accidental damage

    •    16AWG 0.060" THK Steel Constuction

    •    Size - 1.5" H x 2.75" L



SP100
Arlington Ind. SP100 Saftey Protection Nail Plate

Laerger SP100 Safety Plate
 
 


Shipping Policy

Request Info / Quote
Wall Plates - Bulk Wire, Keystone, Hole Plates, Connector Plates Etc. 
   

Main Wall Plate Index Page

Bulk Wire Plates, Nose Plates, Keystone Plates, Hole Plates, Decorator Trim Plates Etc.

Wall Plates, Bulk Wire, Nose, Decora, Keystone, Hole Plates Etc.



Wall-Plates
 


Shipping Policy

Request Info / Quote
Wall Plate and Panel Mount Connectors - RCA, F-Pin, RJ45, RJ11 Etc. 
   

Wall Plate Connectors for Audio, Video and Communications

Most of our AV Connectors can be used in Hole Plates, Keystone Plates or can simply be Panel Mounted

Speaker Terminals

Panel Mount Speaker Terminals

5 Way Binding Posts and Banana Jacks

Panel Mount Speaker Terminals

Communications Terminals

RJ45,RJ11,CAT5E Keystone Jacks

CAT5E, Telephone, RJ45, RJ11

Communications Keystone Jacks

Analog Audio RCA

Panel Mount Jacks

Analog Audio RCA Panel Mount Jacks

RCA Female to Female Jacks

Audio RCA Panel Mount Jacks

Video RCA

Panel Mount Jacks

Video RCA Panel Mount Jacks

RCA, F-Pin, F-Pin to RCA Etc.

Audio RCA Panel Mount Jacks



Wall Plate Connectors
 


Shipping Policy

Request Info / Quote
Cable Management Solutions 
   

Main Cable Management Index Page

Heat Shrink, Tie Wraps, D-Rings, Conduit Straps, Expandable Braided Sleeves Etc.

Cablemanagement - Heat Shrink, Wire Ties, Cable Boots, D-Rings,Conduit StrapsBraided sleeving



Cable Management