---

Shipping Policy

Request Info / Quote

Buttkicker BKA1000-4a Subwoofer Frequency Amplifier

Special Product Pricing ONLY available for NEW Berkline Seat Customers.     The ButtKicker Power Amplifier.  Designed specifically to power the ButtKicker LFE, the BKA-1000-4A is an incredible value, chock full of features designed to make the installation and operation of the ButtKicker easier and more affordable.      No preamplifier is required.  For home theater, just use a RCA cable to go from your processor's subwoofer out* to the RCA input on the ButtKicker Amplifier.  Then, use 12 gauge speaker wire from the amplifier to the ButtKicker.  It's as simple as that - plug 'n play.      With 1100 watts into 4 ohms and 2100 watts into 2 ohms. Not only does the ButtKicker Amplifier have over 2100 watts of power, it adds low and high cutoff filters at no additional cost.      The BKA1000-4A is able to power up to 4 - 4ohm BK-LFE Transducers or 8 BK-Mini-LFE Transducers.     View the BKA1000-4A Rear Panel   ButtKicker BKA1000-4A Amplifier Specifications §          1100 Watts @ 4 ohms §          2100 Watts @ 2 ohms §          Powers up to 4 BK-LFE Transducer §          Powers up to 8 MiniBK-LFE Transducers §          Class D switching technology §          Variable high cutoff, 40 to 160 Hz §          Low cutoff, 25 Hz switchable §          RCA and ¼” inputs with 160mVolt and 1.25 Volt sensitivities  §          Five way binding post speaker wire output §          Convection cooling, i.e. no fan §          12"W x 11"L x 4.375"H, §          23 lbs / 10.5 kg   BKA1000-4a Power Amplifier User Guide and Installation Notes – PDF Spec Sheet 108KB BK-LFE Shaker  – User Guide and Installation Notes  – PDF Spec Sheet 22 Pages 235KB Wiring Diagram for the Buttkicker BK-LFE and BKA1000-4A PDF Document   If wiring the seats seems a bit troublesome consider the BK-QCP. The Quick Connect Package makes installation a breeze and includes all of the necessary components BKA1000-4A-Berk

Larger BKA1000-4A Image

 

---

Shipping Policy

Request Info / Quote

Buttkicker Quik Connect Package BK-QCP

Special Product Pricing ONLY available for NEW Berkline Seat Customers. The BK-QCP is designed to enable the user to easily connect one to four ButtKickers to one ButtKicker Power Amplifier in a simple "plug ‘n’ play" fashion. The "Quick Connect – Quick Select Box" also operates as an "on / off" selector allowing the user to select whether or not a ButtKicker will receive power. The Quick Connect kit includes the necessary cables to connect the ButtKicker Power Amplifier to a RCA "subwoofer" output on an A/V receiver even while using a power subwoofer.   The BK-QCP Buttkicker Quick Connect §          Allows non-tech users to easily connect up to 4 Buttkickers to one amplifier §          Impedance matching performed based on number of seats connected and selected §          Includes   §          Four 12' lengths of 14 gauge speaker wire with banana type connectors for connecting ButtKickers to the “Quick Connect – Quick Select Box”   §          One 20' length of 14 gauge speaker wire with banana type connectors for connecting the   §          RCA “Y” connector and “Speaker Level Interface   §          Adaptor” to split the “subwoofer out” from either a professional or consumer A/V receiver to allow the use of both a subwoofer and the ButtKicker   §          6' RCA cable for connecting the ButtKicker Power Amplifier to the A/V receiver View the BK-QCP PDF Instructions BK-QCP-Berk

View Larger Image

 

---

Shipping Policy

Request Info / Quote

Buttkicker BK-Link Wireless Audio Transmitter

Special Product Pricing ONLY available for NEW Berkline Seat Customers. The Buttkicker BK-Link §          Eliminates the need to run a subwoofer cable from the AV receiver to the BK Amplifier or Powered subwoofer §          Sends audio signal from the subwoofer or line out of the A/V processor to the input of the Buttkicker Amplifier §          900MHz Bandwidth §          Frequency Response Range of 5-350Hz §          Transmitance Range of 30' without obstruction §          Sending Unit features Red and Green Status LED §          RF Gain control knob on Sending Unit for tuning to you system and environment §          LED Indicator on Receiver for identification of signal reception §          Includes: o         1 Send Unit w/ AC Adaptor o         1 Receiver Unit w/ AC Adapter o         2 RCA Male to Male Cables View the BK-Link PDF Instructions BK-Link-Berk

View Larger Image

 

---

Shipping Policy

Request Info / Quote

Berkline Aluminum Removable Cupholders

Berkline Removable Cupholders - We think is their best to date. This cupholder is made of solid aluminum and is available in unfinished aluminum or Black. Besides the obvious benefit of the aluminum's durability is the fact that these cupholders can be easily removed and cleaned (Dishwasher Not Recommended). The design of the aluminum cupholders also features a one level completely flat bottom. The flat bottom allows a larger variety of cup to sit safely in the base of the cupholder. No modifications required for use: These were designed to fit over the black rimmed plastic cupholders so the fit with these is slightly better than the chrome rimmed but the fit is good with both. The removable cupholders will not fit over the lighted cupholders.   Berkline Cup-RAL Removable Cupholder Specifications     •    Color: Aluminum     •    Made from Solid Aluminum 0.50" Thick     •    Overall Height: 2.65"     •    Overall Diameter: 4.53"     •    Mounting Depth Required: 2.5"     •    Mounting Diameter Required: 3.53"     •    Inside Depth: 2.6"     •    Inside Diameter: 3.45"     •    Existing Cupholder Required for Use Cup-RAL

Larger Berkline Removable Cupholder

 

---

Shipping Policy

Request Info / Quote

Berkline Black Aluminum Removable Cupholders

Berkline Removable Cupholders - We think is their best to date. This cupholder is made of solid aluminum and is available in unfinished aluminum or Black. Besides the obvious benefit of the aluminum's durability is the fact that these cupholders can be easily removed and cleaned (Dishwasher Not Recommend). The design of the aluminum cupholders also features a one level completely flat bottom. The flat bottom allows a larger variety of cup to sit safely in the base of the cupholder. No modifications required for use: These were designed to fit over the black rimmed plastic cupholders so the fit with these is slightly better than the chrome rimmed but the fit is good with both. The removable cupholders will not fit over the lighted cupholders   Berkline Cup-RALBK Removable Cupholder Specifications     •    Color: Black     •    Made from Solid Aluminum 0.50" Thick     •    Overall Height: 2.65"     •    Overall Diameter: 4.53"     •    Mounting Depth Required: 2.5"     •    Mounting Diameter Required: 3.53"     •    Inside Depth: 2.6"     •    Inside Diameter: 3.45"     •    Existing Cupholder Required for Use Cup-RALBK

Larger Berkline Removable Cupholder

 

---