Shipping Included on Orders of $25 or More
| X10 ActiveHome Pro CM15A w/Computer Control Software Bundle
|
|
X10 ActiveHome Pro SW31A / CM15A Overview
With the CM15A USB PC interface you can now control your household electronics with the ActiveHome Pro Software. How you control your home is up to you! Never want to touch another switch? With the X10 ActiveHome Pro's PC home automation, you won't have to! You can create customized home automation routines according to your schedule, so you can wake up to dimmed lights and soft music, come home after work to a brightly lit house, and go to the bed without thinking about turning off all your lights – they'll just turn right off for you. You can even create customized macros to control your more complex systems.
The NEW ActiveHome Pro USB computer interface (CM15A) is ready for future enhancements as well. This Tiny White Box will have you monitoring your home surveillance cameras, controlling your home via the web, and more. The CM15A features built in memory and a battery backup inside the USB Computer Interface allows timers to operate with your computer turned off. The CM15A also sends and receives X10 communication via RF and down the powerline reducing the number of components you used to need for computer controlled home automation. You can use exclusive RF macros to control modules that are tricky to control directly from the CM15A (Requires an X10 RF Receiver)
X10 as an originator of powerline communication systems also has compatibility with many other companies including built-in modules for the Leviton DHCTM line of controllers. Pretty much if it has the ability for you to set a house code and number address either mechanically or electronically it should compatible. View the X10 MFG compatibility list.
X10 ActiveHome Pro SW31A and CM15A Specifications:
• Send and Receive RF X10 Powerline Communications
• Send and Receive Powerline Communications
• Supports 256 House/Unit Codes
• USB Computer Interface
• Works with Computer Off w/ Battery Back-Up
• Battery Back Up - Requires 4-AAA Batteries not Included
• Programmable Software Interface - Timers, Macros Etc.
• The software monitors battery life so you won't have unexpected down times.
• The software monitors other computers and modules for used codes
• Computer Requirements - PC Running any Windows OS and USB Port
• CM15A Dimensions: 4.9"H x 3.5"W x 1.5" D
• 1yr Warranty
• What's included: CM15A, USB Cable, ActiveHome Pro Software SW31A
Other Software Also included at this time:
SW39A - OnAlert Security Plug-In
Allow Security devices to control ActiveHome Pro and or Send Emails
SW34A - MyHouse Web Control/Monitoring Plug-In
Control ActiveHome Pro Remotely thru the internet
SW33A - IWatchOut Video Control Plug-In
Control, Record, View, Video Cameras,
SW32A - Smart Macro Plug-In
Create conditional Macros using "and", "or", "else" Logic
Note: A Link will be provided to download the software when your hardware has shipped.
View the CM15A Bottom Image
View the CM15A Back Image
View the X10 ActiveHome Pro SW31A / CM15A Manual PDF
View our X10 FAQ and Downloads Page
CM15A
|
|
Shipping Included on Orders of $25 or More
| X10 MT12A Mini Table Top Timer and Alarm Clock
|
|
X10 MT12A Overview
The XI0 MT12A Mini Timer controls up to 8 X10 Modules automatically or instantly. You can have your outside lights as well as inside lights and appliances go on and off at preset times to give your home a lived-in look while you are away.
You can program your Modules to go on and off at the same time every day or you can set your radio to wake you up "Once" only, for an early morning flight. There is even a '"Security" Mode that automatically varies your programmed time each day so your home doesn't look like it's controlled by a timer.
You can keep the Mini Timer by your bedside and it will wake you up on weekdays. The MT12A has a snooze feature so you can sleep a while longer and you can turn the alarm off on weekends.
You can manually turn off your child's radio or night light from your bedside. You can turn on ALL lights connected to Lamp Modules and Wall Switch Modules with the touch of a button if you hear a suspicious noise at night. You can even turn off everything in the system with one button.
The Mini Timer plugs into any AC outlet in your home and you set it like a digital alarm clock. Channel number 1 also activates an internal buzzer so you can us it as an alarm clock too! You can program up to 8 XI0 Modules from the Mini Timer and you also have instant control of 8 Modules.
X10 MT12A Mini Timer Specifications:
• Programmable Alarm Clock and Timer
• Controls upto 8 Devices on the Same House Code
• Timed events run the same time everday - not 7 Day Programmable
• Mutliple On/Off sequences can be programmed for the same device on the same day
• Programmable - Run Once Feature - that erases itself after 24hrs
• Security Mode for random operation while on Vacation
• Wall Plug Power Supply Included
• Sends On/Off Commands and ALL On / All Off
• Works with any X10 Module that responds to Powerline X10 On/Off Commands
• Programmable for only 1 House Code and 8 devices
• Battery Back-up with 2 AA Batteries - Not Included
• MT12A Dimensions: 3.25"H x 4.625"W x 2" D
• 1yr Warranty
The MT12A is the same as the X10 Pro XPMT1
For our Somfy RTS Shade Automations Customers: This unit in conjunction with the UM506 provides a simple, effective low cost automation. The Somfy remotes can be wired to the UM506 so that the UM506 acts like a finger pressing the buttons.
View the MT12A Top Image
View the X10 Pro MT12A Manual PDF
View our X10 FAQ and Downloads Page
MT12A
|
|
|
Shipping Included on Orders of $25 or More
The X10 TM751 wireless transceiver module is an integral part of your home control system. The TM751 receives radio frequency commands from X10 RF transmitting controls like the IR543 Hand Held IR/RF Remote or computer based software like the ActiveHome Pro Software with CM15A USB Interface , wireless motion sensors etc. The TM751 then converts the received X10 signal into a powerline command down the household wiring. The TM751 does not respond to X10 signals sent down the house wiring, it only responds to RF X10 signals he use of the TM751 will improve X10 communication by allowing for 2 paths of X10 commandsl: RF and transmission line.
Note: For larger X10 systems, it is recommended that 1 TM751 is used per house-code setting. For example, if you have all your interior lights on House Code A, all your exterior lights on House Code B, and all your wireless cameras on House Code C, you would need 3 TM751 Transceivers.
The X10 TM751 plugs into standard wall outlets and provides a 2 prong receptacle that functions as an appliance module. The appliance module defaults to Unit code "1" and whatever house code you set it to and responds to On/Off commands. The front of the TM751 also features push button switch that controls On and Off of the appliance plugged into it. The antenna on the TM751 rotates 360 degrees and extends to 12" so that maximum range may be achieve with minimal obstruction. The appliance portion of the TM751 is rated for use with 15A resistive loads, 1/3HP motor loads, 500W Incandescent Loads and 400W TV Loads.
X10 TM571 Transceiver Specifications:
• Color: White
• Plugs into any std 120VAC wall outlet
• Receives RF X10 Signals and converts to Power Line Communications
• Improves X10 Communications
• Adjustable 360 Degree Antenna extendable from 4" to 12"
• 2 Prong Bottom Mounted Appliance Module Outlet
• Local On/Off Button for control of Appliance Module Outlet
• 120VAC - 500W 4Amp Max
• Dimensions: 2.25" W x 2.92" H x 1.37" D (Not Including Antenna or Plug)
• 1yr Warranty
X10 does not specify the RF range.
We tested to 50' through several walls using Active Home Pro and the CM15A
and it worked flawlessly. Not tested beyond 50'. The usable range may vary
different X10 transmitters or different environments..
View the X10 Cross Reference List
View the X10 TM751 Back Image
View the X10 TM751 Manual PDF
View our X10 FAQ and Downloads Page
TM751
|
|
|
Shipping Included on Orders of $25 or More
| X10 IR543 - Plug-In Controller w/ IR Interface
|
|
The X10 IR543 is a manual plug-in controller for X10 automation modules and switches. The IR543 allows IR commands to be received sent from X10 compatible remote controls like the X10 UR74A . The IR543 then converts those IR commands into powerline commands. This is the only interface from X10 that will convert IR to a powerline signal and is an essential item for those wishing to automate their Home Theater lighting with their advanced IR Remotes.
The IR543 provides control of up to 8 unit number codes and all 16 house codes manually. With an IR remote you have full access to the 16 unit number codes as well as all 16 house codes. The IR543 provides the following push button commands: All Lights On, All Units Off, On, Off, Bright and Dim.
X10 IR543 Manual Plug-in Controller w/IR Interface:
• 16 Channel house Code Selection
• 8 Channel Push Button Unit Code Selection
• Receives and Converts IR signals to X10 Powerline Commands
• LED Feedback for reception of commands
• Std. 2 Prong Plug
• Dimensions: 4.55"W x 3.7"D x 1.08" H
• 1yr Warranty
View the X10 IR543 Manual
View our X10 FAQ and Downloads Page
IR543
|
|
|
Shipping Included on Orders of $25 or More
| X10 KR19A Slimfire RF Remote Control
|
|
The X10 KR19A remote controls On/Off, Bright and Dim commands for 1 customer set house code and 2 sequential devices. The X10 KR19 remote control communicates X10 Powerline commands via RF. Reception of X10 RF comands requires a compatible RF Transceiver like the X10 CM15A or TM751 to convert the RF signal into a powerline command.
X10 KR19A Keychain RF Remote Control Specifications:
• Sends RF X10 Powerline Commands (CM15A or T751 Required for reception)
• Controls On/Off and Bright/dim Commands for 2 Sequential Devices
• Lihium Coin Cell Battery Included
• Dimensions: 2.5" H x 1.5" W x 7/16" Thick
• 1yr Warranty
View the X10 KR19A Manual
View our X10 FAQ and Downloads Page
KR19A
|
|
|
Shipping Included on Orders of $25 or More
| X10 / X10Pro UR74A / PUR09 Learning IR / RF Remote Control
|
|
The X10 UR74A and the X10 Pro PUR09 are Universal 5-in-1 Learning Remote controls for your X10 lights and appliances as well as TV, DVD, VCR Cable Satellite Etc. These remotes can communicate X10 Powerline commands via IR, RF or both at the same time. Reception of X10 IR commands requires the X10 IR543 to convert the IR signal into a powerline command. Reception of X10 RF commands requires a compatible RF Transceiver like the X10 CM15A or TM751 to convert the RF signal into a powerline command.
The X10 UR74A remote can be set to any house code (typically only one house code is used per remote). When you want to control an X10 compatible device simply press the X10 button, then the unit code (1 thru 16) and the appropriate command - On, Off, Bright, Dim, All Lamps On or All Modules Off. It really is that simple.
The X10 Remote also comes with codes for the following types of equipment. Traditional TV, Plasma TV, LCD TV, HDTV Tuners, VCR, CD Players, AV Receivers, Cable Boxes, Satellite Tuners, DVD Players, DVR, DVD Recorders, Laser Discs, TV/VCR Combos, DVR/Sat Combos, DVD/VCR Combos, DVR Cable Combos, DVR/DVD Combos and HTIB.
The X10UR74A / PUR09 remote also has advanced features like Punch Thru keys that allow you control certain devices like volume control of the AV receiver while you are in the TV Tuner mode. This prevents the need for repetitive button pressing.
X10 UR74A RF/IR Learning Remote Control Specifications:
• Sends RF X10 Powerline Commands (CM15A or T751 Required for reception)
• Sends IR Powerline Commands (IR543 Required for X10 Reception)
• Can control typical AV electronics with IR codes
• Can control many devices with built-in codes
• Learning Capability for codes not built-in
• Requires 4-AAA Batteries not Included
• Dimensions: 7 3/8"L x 2.25"W x 0.975" D
• 1yr Warranty
Stocked as UR74A but is the same as the X10Pro PUR09
View the X10 Cross Reference List
View the X10 UR74A Manual
View the X10 UR74A Code List
View our X10 FAQ and Downloads Page
UR74A
|
|
|
Shipping Included on Orders of $25 or More
| X10 WS12A / RWS17 Dimmer Switch - Incandescent Loads - White/Ivory
|
|
T he X10 WS12A is a wire-in modules for incandescent lamps that fits into a standard utility box that provide both On/Off and dimming capabilities through the switch manually or through the use of separate X10 controllers like the IR543, ActiveHome Pro Software, UR74A remote controls etc. The WS12A is ideal for controlling bedroom, living room, family room, and Home theater light fixtures.
The WS12A Control Dimmer Switch responds to "All Lights Off", "All Lights Off", unit On/Off and unit Dim/Brighten commands from any X10 controller or software. Housecodes and unit code settings are located behind the easy to remove rocker switch. The switch can be manually turned On/Off by a quick press of the paddle or by using the slide switch below the rocker paddle. For dimming simply press and hold the rocker switch.
The WS12A can be used in standard stand alone switch applications or 3-Way/4-Way wiring simplifying ordering. When used in 3/4-Way applications the X10 WS14A companion switch is required. The WS12A is rated at 120VAC/60Hz. 500W (incandescent only). 40 Watts minimum. Not recommended for use with Fluorescent or Low Voltage Lighting.
The dimmer switch is scene capable with the use of the ActiveHome Pro software which allows the user to numerically set the level of brightness or using your advanced Home Theater remote by programming the Dim/Brighten IR commands for a tested duration to achieve the desired dim level. This switch does not recall or remember settings.
The X10 WS12A and X10Pro XPD3 are the same switches and can be used interchangeably.
X10 WS12A / RWS17 / XPD3 Dimming Rocker Switch Specifications:
• Single, 3 Way or 4 Way Applications
• Incandescent Lighting Only Use
• Dimming On/Off Rocker Switch
• X10 Control Capable
• 120VAC - 500W 4Amp Max
• Fits Std. switch Box - Depth Required - 1.57"
• X10 Code Switches Located behind Rocker Panel
• Includes White and Ivory Trim Paddles
• Optional Decora Trim Plates
• 1yr Warranty
Stocked as WS12A and RWS17 but is the same as the X10Pro XPD3
View the X10 Cross Reference List
View the X10 WS12A Ivory Image
View the X10 WS12A Code Switch Location Image
View the X10 WS12A Manual PDF
View our X10 FAQ and Downloads Page
WS12A / RWS17
|
 | |
| |
|
|
|
Shipping Included on Orders of $25 or More
| X10 WS13A Switch Incandescent, Inductive or Fluorescent Loads White/Ivory
|
|
The X10 WS13A is a wire-in module for incandescent, fluorescent and inductive loads that fits into a standard utility box that provides both On/Off capabilities through the switch manually or through the use of separate X10 controllers like the IR543, ActiveHome Pro Software, UR74A remote controls etc. The WS13A is ideal for controlling bedroom, living room, family room, and Home Theater light fixtures as well as appliances and motors where non-dimming applications are required.
The WS13A Control Dimmer Switch responds to "All Lights Off", "All Lights Off" and unit On/Off commands from any X10 controller or software. Housecodes and unit code settings are located behind the easy to remove rocker switch.
The WS13A can be used in standard stand alone switch applications or 3-Way/4-Way wiring simplifying ordering. When used in 3-Way applications the X10 WS14A companion switch is required. The WS13A is rated at 120VAC/60Hz. 1800W (Incandescent, Fluorescent, Appliance and Motor Loads).
IMPORTANT: The WS13A switch requires a Neutral connection. This is not the same as ground. If you are unsure whether or not. Please consult the wiring diagram in the manual below.
The X10 WS13A and X10Pro XPS3 are the same switches and can be used interchangeably.
X10 WS13A Rocker Switch Specifications:
• Single, 3 Way or 4 Way Applications
• Incandescent, Fluorescent, Inductive Lighting Appliance or Motor Use
• On/Off Rocker Switch
• X10 Control Capable
• 120VAC - 1800W 20Amp Max
• Fits Std. switch Box - Depth Required - 1.50"
• X10 Code Switches Located behind Rocker Panel
• Connection: Holes w/ Screws - See Image Link Below
• Includes White and Ivory Trim Plates, Paddles Etc.
• 1yr Warranty
Stocked as WS13A but is the same as the X10Pro XPS3
View the X10 Cross Reference List
View the X10 WS13A Ivory Image
View the X10 WS13A Back Image
View the X10 WS13A Code Switch Location Image
View the X10 WS13A Manual PDF
View our X10 FAQ and Downloads Page
WS13A
|
|
|
Shipping Included on Orders of $25 or More
| X10 WS14A Companion Slave Switch White/Ivory
|
|
T he X10 WS14A is a companion switch to the WS12A,WS13A,XPD3,XPS3 and XPDI3 X10 / X10Pro switches lamps that fits into a standard utility box. this switch is to only be used as a companion switch in 3/4 way applications and will not operate independently.
The X10 WS14A and X10Pro XPSS are the same switches and can be used interchangeably.
X10 WS14A Companion / Slave Rocker Switch Specifications:
• Companion Switch for 3 Way or 4 Way Applications
• Compatible with WS12A, WS13A, XPDI3
• Fits Std. switch Box - Depth Required - 1.50"
• Connection: Holes w/ Screws - See Image Link Below
• X10 Code Switches - Not Required for Companion Switches
• Includes White and Ivory Trim Plates, Paddles Etc.
• 1yr Warranty
Stocked as WS14A but is the same as the X10Pro XPSS
View the X10 Cross Reference List
View the X10 WS14A Ivory Image
View the X10 WS14A Back Image
View the X10 WS14A Manual PDF
View our X10 FAQ and Downloads Page
WS14A
|
|
|
Shipping Included on Orders of $25 or More
| X10 WS467 Dimming Switch Module - White
|
|
T he X10 WS467 is a wire-in switch module for incandescent lamps that fits into a standard utility box and provides On/Off/ as well as dimming capabilities. The X10 WS467 switch is designed to replace standard Toggle switches using the existing wall plate. The switch can be used manually or with the use of separate X10 controllers like the IR543, ActiveHome Pro Software, UR74A remote controls etc. The WS467 is ideal for controlling bedroom, living room, family room, Home Theater light fixtures etc.
The X10 WS467 switch provides local ON/Off control of lights and remotely responds to "All Lights Off", "All Lights Off", unit On/Off and unit Dim/Brighten commands from any X10 controller or X10 software. A slide switch is located under the push button to disconnect the circuit so light bulbs may be changed without accidental remote operation of the light fixture. X10 house codes and unit code settings are easily accessible on the main WS467 switch.
The Ws467 is rated at 120VAC/60Hz. 500W (incandescent only). 40 Watts minimum. Not recommended for use with Fluorescent or Low Voltage Lighting.
The X10 WS467 and X10Pro PLW021 are identical parts and can be used interchangeably.
X10 WS467 Dimming Toggle Push Button Switch Specifications:
• Color: White
• Incandescent Lighting Only Use
• On/Off Pushbutton Toggle Switch
• X10 Control Capable
• Remotely Responds to X10: "All Lights Off", "All Lights Off", On/Off, Dim/Brighten
• 120VAC - 500W 4Amp Max
• Fits Std. Switch Box and Wall Plate - Depth Required - 1.17"
• Easy Access X10 Code Switches
• 1yr Warranty
Stocked as X10 WS467 but is the same as the X10 Pro PLW01
View the X10 Cross Reference List
View the X10 WS467 Back Image
View the X10 WS467 Manual PDF
View our X10 FAQ and Downloads Page
WS467
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro PLW02 Dimming 3 Way Switch Module W/ Companion - White
|
|
T he X10Pro PLW02 is a wire-in switch module for incandescent lamps that fits into a standard utility box and provides On/Off as well as dimming capabilities. This PLW02 kit includes a X10 pushbutton wall switch module and a companion for 3 way switch wiring. This X10 switch is designed to replace standard Toggle switches using the existing wall plate. The switch can be used manually or with the use of separate X10 controllers like the IR543, ActiveHome Pro Software, UR74A remote controls etc. The PLW02 is ideal for controlling bedroom, living room, family room, Home Theater light fixtures etc.
The PLW02 manually provides local ON/Off control of lights and remotely responds to "All Lights Off", "All Lights Off", unit On/Off and unit Dim/Brighten commands from any X10 controller or X10 software. A slide switch is located under the push button to disconnect the circuit so light bulbs may be changed without accidental remote operation of the light fixture. X10 house codes and unit code settings are easily accessible on the main PLW02 switch. The companion switch does not require X10 codes.
The WS12A can be used in standard stand alone switch applications or 3-Way/4-Way wiring simplifying ordering. When used in 3/4-Way applications the X10 PCW03 companion switch is required (1 is included). The PLW02 is rated at 120VAC/60Hz. 500W (incandescent only). 40 Watts minimum. Not recommended for use with Fluorescent or Low Voltage Lighting.
The X10 WS4777 and X10Pro PLW02 are the same 3-way kits and can be used interchangeably.
X10 PRO PLW02 Dimming Toggle Push Button Switch Specifications:
• Color: White
• Single, 3 Way or 4 Way Applications
• Incandescent Lighting Only Use
• On/Off Pushbutton Toggle Switch
• X10 Control Capable
• Remotely Responds to X10: "All Lights Off", "All Lights Off", On/Off, Dim/Brighten
• 120VAC - 500W 4Amp Max
• Fits Std. Switch Box and Wall Plate - Depth Required - 1.17"
• Easy Access X10 Code Switches
• Includes: PLW03 Master Switch and PCW03 Companion Switch.
• 1yr Warranty
Stocked as X10Pro PLW03 but is the same as the X10 WS4777
View the X10 Cross Reference List
View the X10 Pro PLW02 Back Image
View the X10 Pro PLW02 3-Way and 4-Way Wiring Instructions PDF
View the X10 Pro PLW02 Manual PDF
View the X10 WS4777 Manual PDF
View our X10 FAQ and Downloads Page
PLW02
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro XPDI3 Dimming Switch Incandescent / Inductive / Low-Voltage - White/Ivory
|
|
The X10 Pro XPDI3 is a wire-in module for incandescent, low-voltage lighting, inductive and small motor loads that fits into a standard utility box that provides both Dimming and On/Off capabilities through the switch manually or through the use of separate X10 controllers like the IR543, ActiveHome Pro Software, UR74A remote controls etc. The XPDI3 is ideal for controlling bedroom, living room, family room, and Home Theater light fixtures as well as and motors where dimming applications are required.
The XPDI3 Control Dimmer Switch responds to "All Lights Off", "All Lights Off", unit On/Off and unit Dim/Brighten commands from any X10 controller or software. Housecodes and unit code settings are located behind the easy to remove rocker switch.
The XPDI3 can be used in standard stand alone switch applications or 3-Way/4-Way wiring simplifying ordering. When used in 3-Way applications the X10 WS14A companion switch is required. The XPDI3 is rated at 120VAC/60Hz. 40W to 500W Loads. (Incandescent and Motor Loads).
The dimmer switch is scene capable with the use of the ActiveHome Pro software which allows the user to numerically set the level of brightness or using your advanced Home Theater remote by programming the Dim/Brighten IR commands for a tested duration to achieve the desired dim level. This switch does not recall or remember settings
Important: The XPDI3 switch requires a Neutral connection. This is not the same as ground. If you are unsure whether or not. Please consult the wiring diagram in the manual below.
Note: While this switch can be used for fan motors it may cause a hum in the motor. This may occur with any dimmer connected to a motor regardless of if it is a X10 switch or not.
X10 Pro XPDI3 Dimming Rocker Switch Specifications:
• Single, 3 Way or 4 Way Applications
• Incandescent, Low Voltage and Inductive Lighting or Small Motor Use
• Dimming On/Off Rocker Switch
• X10 Control Capable
• 120VAC - 500W 4Amp Max
• Fits Std. switch Box - Depth Required - 1.57"
• Includes White and Ivory Rocker Paddles
• White / Ivory Trim Plates - Not Included See Options
• 1yr Warranty
View the X10Pro XPDI3 Ivory Image
View the X10Pro XPDI3 Manual PDF
View our X10 FAQ and Downloads Page
XPDI3
|
| |
| |
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro XPDF Dimming In-Line Module Incandescent Loads
|
|
The X10 Pro XPDF is an In-Line Dimming module for incandescent loads designed to fit inside a typical lighting fixture or signal gang utility boxes. The XPDF provides Dimming, Unit On/Off and All Lights On/Off capabilities through the use of separate X10 controllers like the IR543, ActiveHome Pro Software, UR74A remote controls etc. The XPDF is ideal for controlling bedroom, living room, family room, and Home Theater light fixtures.
The dimmer switch is scene capable with the use of the ActiveHome Pro software which allows the user to numerically set the level of brightness or using your advanced Home Theater remote by programming the Dim/Brighten IR commands for a tested duration to achieve the desired dim level. This switch does not recall or remember settings
Important: The XPDF module requires a Neutral connection. This is not the same as ground. If you are unsure whether or not. Please consult the wiring diagram in the manual below.
Note: Not for use with motors, receptacles, Fluorescent Lighting or Transformers.
X10 Pro XPDF Dimming In-Line Module Specifications:
• In-Line Use - No Manual Switch
• Incandescent Loads Only
• Dimming, On/Off, All On/Off Capable
• X10 Control Capable
• 120VAC - 300W 2.5Amp Max
• Max Operating Temp - 140 Deg F
• Fits Std. Single Gang Box
• Dimensions: 2.94" L x 2.06" W x 1.3" D
• 1yr Warranty
View the X10 Pro XPDF Manual PDF
View our X10 FAQ and Downloads Page
XPDF
|
|
|
Shipping Included on Orders of $25 or More
| X10 Pro XPFM In-Line Module Incandescent / Inductive / Low-Voltage Loads
|
|
The X10 Pro XPFM is an In-Line module for incandescent, Flusrescent, Inductive and small motor loads designed to fits inside a typical lighting fixture or signal gang utility boxes for the control of lights, appliances, fans etc. The XPFM provides Unit On/Off and All Lights On/Off capabilities through the use of separate X10 controllers like the IR543, ActiveHome Pro Software, UR74A remote controls etc.
Important: The XPFM switch requires a Neutral connection. This is not the same as ground. If you are unsure whether or not. Please consult the wiring diagram in the manual below.
X10 Pro XPFM In-Line Module Specifications:
• In-Line Use - No Manual Switch
• Incandescent, Low Voltage and Inductive Lighting or Small Motor Use
• On/Off, All On/Off Capable
• X10 Control Capable
• 120VAC - 1800W 15Amp Max
• Max Operating Temp - 140 Deg F
• Fits Std. Single Gang Box
• Dimensions: 2.94" L x 2.06" W x 1.3" D
• 1yr Warranty
View the X10 Pro XPFM Manual PDF
View our X10 FAQ and Downloads Page
XPFM
|
|
|
Shipping Included on Orders of $25 or More
| X10 LM465 Wall-Plug Dimming Module Incandescent Loads
|
| |